incorporating Reason/Fairlight into a Pro Tools studio
Posted: Mon Feb 18, 2019 6:16 pm
Hi. I've been working in Pro Tools since v 4.3.1 (and the WaveFrame before that) and often dreamed of the Fairlight systems. Now I finally have one within reach and I'm excited, but want to make sure I understand the implications before I jump in. My partner and I currently are working in a Pro Tools environment, each editing, recording and premixing sound on our own rigs and then coming together on the mix stage. We currently run a 3-workstation mix stage:
1. dialog on Pro Tools 12 via MBox Pro interface
2. sound effects on Pro Tools 12 HD via Focusrite Scarlet 18i20 interface
3. music and rerecording tracks on Pro Tools 9 HD on HD|Accel 192 I/O with Sync I/O
All devices are getting clock from the Sync I/O. The dialog computer sends MTC to the effects station and LTC (from an audio track using an analog audio output) to the music/rerecording rig.
We also have Euphonix Artist controllers which work on all 3 rigs (and can be switched between them, albeit not too elegantly).
For starters, I'd like to run the dialog from Reason/Fairlight. Would I be able to do that within this setup or would I need additional hardware?
1. dialog on Pro Tools 12 via MBox Pro interface
2. sound effects on Pro Tools 12 HD via Focusrite Scarlet 18i20 interface
3. music and rerecording tracks on Pro Tools 9 HD on HD|Accel 192 I/O with Sync I/O
All devices are getting clock from the Sync I/O. The dialog computer sends MTC to the effects station and LTC (from an audio track using an analog audio output) to the music/rerecording rig.
We also have Euphonix Artist controllers which work on all 3 rigs (and can be switched between them, albeit not too elegantly).
For starters, I'd like to run the dialog from Reason/Fairlight. Would I be able to do that within this setup or would I need additional hardware?