Xtreemtec wrote:Well we have the Teranex Optical to HDMI and HDMI to Optical. (Which do both share a SDI in / out besides optical)
And i can say that 12G-SDI 3840x2160P50/59.94 works perfect!!!
I do admit when using a Phabrix QX 12G that the 12G-SDI is missing some payload ID's But that is almost with all BMD hardware when running 6G or 12G.
I have tested 4K DCI in the past. And i noticed a color shift in the HDMI output and a different color shift on the LCD panel..
So yes some modes do not run as advertised. But broadcast 12G is working without issues.
Question for you, Daniel, since you mention that you have the Teranex Optical units. Is it possible to use them with only SDI/Optical and not utilize the HDMI port? I know they are advertised as HDMI converters (to/from SDI&Optical), but I only want to convert from/to SDI, not HDMI.
I know I can use the Mini Converter Optical Fiber 12G for this same purpose (and cheaper), but I'd prefer the Teranex mini due to better cooling (higher ambient temp) and also because of the XLR ports (meaning I don't need to buy another mini converter to de-embed my audio).
My goal is to come out of my existing SDI gear (ATEM 4K and 40x40HUB), convert to fiber for a few hundred feet, then convert back to SDI (with separate XLR audio).
Thanks!
Tim