Wed Feb 05, 2025 12:10 am
Hello Paolo. In the setup you describe, the audio would typically be about 3-5 frames ahead of the video. It is not common for audio to be later than the video unless it is going through some sort of specialized processing. In the ATEM Audio Mixer you can set the delay for the analog audio input which comes from your console. Try setting it a few frames and see if it is better. That would be very common and normal. If your audio is really delayed from the video initially, I would look for the source of that delay and try to eliminate it. 10 frames is quite long. I hope this helps.
Gary
Gary Adams
Blackmagic Design