Is it work? ATEM MINI CCU/Bidirectional Converter/Videohub

Questions about ATEM Switchers, Camera Converter and everything live!
  • Author
  • Message
Offline

zapteam

  • Posts: 23
  • Joined: Tue Nov 27, 2018 12:35 am
  • Real Name: Alex Bouchard

Is it work? ATEM MINI CCU/Bidirectional Converter/Videohub

PostThu Oct 21, 2021 4:58 pm

Did anyone try to use a Videohub with 2X Bidirectional Converter 3G for camera control of Pocket 4K/6K over Atem Mini?

Screen Shot 2021-10-21 at 12.55.30 PM.png
Screen Shot 2021-10-21 at 12.55.30 PM.png (400.92 KiB) Viewed 716 times


Thanks!
Offline

Gary Adams

Blackmagic Design

  • Posts: 1186
  • Joined: Sat Aug 25, 2012 6:14 am

Re: Is it work? ATEM MINI CCU/Bidirectional Converter/Videoh

PostThu Oct 21, 2021 8:40 pm

Hello Alex. This will work. Make sure you set the camera ID in the BiDirectional Converter 3G at the camera to match the input of the ATEM switcher. If it is 1, then it probably is already that way, but it is also important that you verify the latest firmware is in the Micrconverters so there is a good time to check the ID number. The one at the switcher does not matter in this case.

Regards, Gary
Gary Adams
Blackmagic Design
Offline

zapteam

  • Posts: 23
  • Joined: Tue Nov 27, 2018 12:35 am
  • Real Name: Alex Bouchard

Re: Is it work? ATEM MINI CCU/Bidirectional Converter/Videoh

PostSat Oct 23, 2021 5:19 pm

Gary Adams wrote:Hello Alex. This will work. Make sure you set the camera ID in the BiDirectional Converter 3G at the camera to match the input of the ATEM switcher. If it is 1, then it probably is already that way, but it is also important that you verify the latest firmware is in the Micrconverters so there is a good time to check the ID number. The one at the switcher does not matter in this case.

Regards, Gary



Thank you for your reply. I will immediately buy a Videohub!

Return to Live Production

Who is online

Users browsing this forum: crtkecnkl659, jfykeaucq871 and 28 guests