ATEM Mini Switchers - 1080i deinterlace problem

Questions about ATEM Switchers, Camera Converter and everything live!
  • Author
  • Message
Offline

lee4wec

  • Posts: 10
  • Joined: Fri Feb 26, 2021 5:41 pm
  • Real Name: Conor Lee

ATEM Mini Switchers - 1080i deinterlace problem

PostMon Nov 08, 2021 12:26 am

Do any of you know how to make ATEM Mini switchers deinterlace process correctly?

I have Atem Mini to Extreme ISO, none of them correctly deinterlace 1080i signal. They only line doubling horrible looking process.

I have been mailing to Blackmagic, all the answers are, saying, they will pass it to their developers. It has been years, nothing has been changed.
Offline
User avatar

Roman Pytkin Pekarek

  • Posts: 2312
  • Joined: Tue Oct 30, 2012 1:11 pm
  • Location: SVK

Re: ATEM Mini Switchers - 1080i deinterlace problem

PostMon Nov 08, 2021 11:12 pm

U mean 1080i to 1080p ? fullrate ? halfrate ?
http://tally.pytkin.sk
http://chucktv.eu
http://www.stonepp.tv
http://www.media-planet.sk
Offline

eMilty

  • Posts: 164
  • Joined: Mon Oct 22, 2018 9:54 pm
  • Location: The Netherlands
  • Real Name: Marco Miltenburg

Re: ATEM Mini Switchers - 1080i deinterlace problem

PostWed Nov 10, 2021 12:07 pm

What are you feeding it?

I just tested a 1080p50 signal converted with a Decimator MD-HX to 1080i50 and it shows up fine on preview and PGM out of my Atem Mini Extreme.
Offline
User avatar

Xtreemtec

  • Posts: 5387
  • Joined: Wed Jan 02, 2013 11:48 am
  • Location: The Netherlands

Re: ATEM Mini Switchers - 1080i deinterlace problem

PostWed Nov 10, 2021 12:39 pm

What is the source??? If the source is fake interlaced ( PsF) it wont look good at all ;)
Daniel Wittenaar .:: Xtreemtec Media Productions ::. -= www.xtreemtec.nl =-
4K OBV Trailer, ATEM TVS HD, 4M/E Broadcast Studio 4K, Constelation 8K, Hyperdeck Studio 12G, Ursa Broadcast 4K, 4K fiber converters with Sony Control
Offline

lee4wec

  • Posts: 10
  • Joined: Fri Feb 26, 2021 5:41 pm
  • Real Name: Conor Lee

Re: ATEM Mini Switchers - 1080i deinterlace problem

PostThu Dec 02, 2021 9:01 pm

Sources are from Canon C100, C300 cameras, feed to Atem Mini, Atem Mini Pro, Atem Extreme, Atem Extreme ISO, Atem Television 4K.

C100 and C300 MK1 only outputting 1080i signal to SDI and HDMI (even you setup 1080p for recording)
Last edited by lee4wec on Thu Dec 02, 2021 9:05 pm, edited 1 time in total.
Offline

lee4wec

  • Posts: 10
  • Joined: Fri Feb 26, 2021 5:41 pm
  • Real Name: Conor Lee

Re: ATEM Mini Switchers - 1080i deinterlace problem

PostThu Dec 02, 2021 9:02 pm

Roman Pytkin Pekarek wrote:U mean 1080i to 1080p ? fullrate ? halfrate ?

Sources are from Canon C100, C300 cameras, feed to Atem Mini, Atem Mini Pro, Atem Extreme, Atem Extreme ISO, Atem Television 4K.

C100 and C300 MK1 only outputting 1080i signal to SDI and HDMI (even you setup 1080p for recording)
Last edited by lee4wec on Thu Dec 02, 2021 9:04 pm, edited 1 time in total.
Offline

lee4wec

  • Posts: 10
  • Joined: Fri Feb 26, 2021 5:41 pm
  • Real Name: Conor Lee

Re: ATEM Mini Switchers - 1080i deinterlace problem

PostThu Dec 02, 2021 9:02 pm

eMilty wrote:What are you feeding it?

I just tested a 1080p50 signal converted with a Decimator MD-HX to 1080i50 and it shows up fine on preview and PGM out of my Atem Mini Extreme.


Sources are from Canon C100, C300 cameras, feed to Atem Mini, Atem Mini Pro, Atem Extreme, Atem Extreme ISO, Atem Television 4K.

C100 and C300 MK1 only outputting 1080i signal to SDI and HDMI (even you setup 1080p for recording)
Offline

lee4wec

  • Posts: 10
  • Joined: Fri Feb 26, 2021 5:41 pm
  • Real Name: Conor Lee

Re: ATEM Mini Switchers - 1080i deinterlace problem

PostThu Dec 02, 2021 9:13 pm

eMilty wrote:What are you feeding it?

I just tested a 1080p50 signal converted with a Decimator MD-HX to 1080i50 and it shows up fine on preview and PGM out of my Atem Mini Extreme.


Decimator MD-HX to 1080i50 ===> they should look good I believe. Many cameras outputting 1080i PsF signal, that is problem.
Offline

lee4wec

  • Posts: 10
  • Joined: Fri Feb 26, 2021 5:41 pm
  • Real Name: Conor Lee

Re: ATEM Mini Switchers - 1080i deinterlace problem

PostThu Dec 02, 2021 9:15 pm

Xtreemtec wrote:What is the source??? If the source is fake interlaced ( PsF) it wont look good at all ;)

Canon C100 and C300. they are pushing PsF. Atem needs to leave it alone or need to properly deinterlace. MANY cameras pusing Psf.
Offline

tomfewchuk

  • Posts: 9
  • Joined: Fri Feb 26, 2021 6:50 am
  • Real Name: Tom Fewchuk

Re: ATEM Mini Switchers - 1080i deinterlace problem

PostThu Apr 14, 2022 3:47 pm

+1 for Blackmagic doing something about this. Please do a firmware update to stop deinterlacing unnecessarily!
Offline

tvgozde

  • Posts: 1
  • Joined: Wed Mar 30, 2022 2:03 pm
  • Real Name: Gokhan BOZ

Re: ATEM Mini Switchers - 1080i deinterlace problem

PostMon Apr 18, 2022 6:43 pm

tomfewchuk wrote:+1 for Blackmagic doing something about this. Please do a firmware update to stop deinterlacing unnecessarily!


I totally agree, I think it's a big problem!

Return to Live Production

Who is online

Users browsing this forum: Google [Bot] and 34 guests