Camera Control Ursa Mini 12K

Questions about ATEM Switchers, Camera Converter and everything live!
  • Author
  • Message
Offline

Simon Egle

  • Posts: 5
  • Joined: Thu Jun 02, 2016 4:35 pm

Camera Control Ursa Mini 12K

PostFri May 13, 2022 1:15 pm

Hi, I have a setup with:

3x Ursa Mini 12K
2x Ursa Mini 4.6K G2
1x Studio 4k Pro
->
SDI
->
Mini Converter SDI to Fiber
->
Fiber
->
ATEM Talkback Converter with Fiber 3G Modules
->
SDI
->
ATEM 4k Prodction

The camera control works for all cameras, but for the Ursa Mini 12K the saturation, contrast, lift, gamma, gain, and the color are not working.

Iris, Shutter, Tint... k
everything else works.

Have the ATEM already exchanged the same problem.
Otherwise no problems with the other cameras.
The camera IDs are correct.

Glad about your help
Offline

codedeltajames

  • Posts: 161
  • Joined: Mon Mar 02, 2020 11:30 am
  • Location: UK
  • Real Name: James Goodwin

Re: Camera Control Ursa Mini 12K

PostFri May 13, 2022 1:39 pm

From memory, there is no colour corrector built into the 12K cameras, so you only get control over the basic settings.
Offline

Mike Ambrose

  • Posts: 70
  • Joined: Wed Jan 13, 2016 11:31 pm

Re: Camera Control Ursa Mini 12K

PostFri May 13, 2022 5:40 pm

That's correct- the 12k doesn't have full control like cameras intended for broadcast use.

viewtopic.php?f=4&t=156404&p=831213#p831213
Offline

Howard Roll

  • Posts: 1623
  • Joined: Fri Jun 03, 2016 7:50 am

Re: Camera Control Ursa Mini 12K

PostFri May 13, 2022 7:59 pm

It’s likely that whatever processing component that’s responsible for QT encoding is being utilized as the corrector. The cams that feature Prores recording lose the ability to encode QT when the color corrector is enabled. The 12K doesn’t encode Prores and the CC funtion is lacking.

Good Luck
Offline
User avatar

Xtreemtec

  • Posts: 5015
  • Joined: Wed Jan 02, 2013 11:48 am
  • Location: The Netherlands

Re: Camera Control Ursa Mini 12K

PostSat May 14, 2022 12:36 pm

It was made clear the moment the 12K was released it would not get CCU / Color control as it is a fully different sensor and processing. ;)

Just dont use the 12K's in Multicam setup.
Daniel Wittenaar .:: Xtreemtec Media Productions ::. -= www.xtreemtec.nl =-
4K OBV Trailer, ATEM TVS HD, 4M/E Broadcast Studio 4K, Constelation 8K, Hyperdeck Studio 12G, Ursa Broadcast 4K, 4K fiber converters with Sony Control

Return to Live Production

Who is online

Users browsing this forum: No registered users and 18 guests