ATEM Mini suggestion for v2

Questions about ATEM Switchers, Camera Converter and everything live!
  • Author
  • Message
Offline

bluesgeek

  • Posts: 10
  • Joined: Tue Dec 10, 2019 2:09 am
  • Real Name: David Therault

ATEM Mini suggestion for v2

PostTue Dec 17, 2019 5:39 pm

I want to monitor audio out directly from the ATEM Mini. Suggest building in onboard audio extraction out with a 3.5mm jack.
Offline

Raphaël Jacquot

  • Posts: 408
  • Joined: Wed Aug 29, 2012 4:15 pm

Re: ATEM Mini suggestion for v2

PostFri Dec 27, 2019 11:00 am

you can use a $10 hdmi audio extraction device...
Offline

bluesgeek

  • Posts: 10
  • Joined: Tue Dec 10, 2019 2:09 am
  • Real Name: David Therault

Re: ATEM Mini suggestion for v2

PostWed Jan 15, 2020 7:15 am

Thank you for the suggestion. Yes, I use this $70 audio extractor.
https://www.bhphotovideo.com/c/product/1385810-REG/comprehensive_cpa_hda3_4k_18g_hdmi_audio.html

So, I have had to add the Up Down Cross converter to output 1080i59.94 and 720p59.94, and an audio extractor. Aside from the cost, what could be a very simple HDMI i/o setup now consists of three devices, power supplies and connecting cables.

My suggestion would be to increase the standards/resolution capacity of the Mini ATEM and add a 3.5 mm program audio out jack.
Offline

MarcusWolschon

  • Posts: 734
  • Joined: Sun Apr 14, 2013 6:59 pm

Re: ATEM Mini suggestion for v2

PostWed Jan 15, 2020 12:04 pm

bluesgeek wrote:I want to monitor audio out directly from the ATEM Mini. Suggest building in onboard audio extraction out with a 3.5mm jack.


+1
The Atem Mini really should have a TRS headphone output.
Ideally low latency line input 1.

Return to Live Production

Who is online

Users browsing this forum: dbassix, jkelec, Slangren, Trickboxx and 45 guests