ATEM mini PIP settings in XLR file

Questions about ATEM Switchers, Camera Converter and everything live!
  • Author
  • Message
Offline
User avatar

Stefan Flos

  • Posts: 31
  • Joined: Thu Aug 23, 2012 6:24 pm
  • Location: The Netherlands - Utrecht

ATEM mini PIP settings in XLR file

PostSat Apr 04, 2020 8:54 am

Hi All,
Just downloaded the new atem mini update and connected my BM pocket 4K - very happy!

I frequently use the PIP settings and customize them for overlay of presentations and speaker: PP from computer on 1 and speaker on input 2 etc.

it would be great if I could use the preset PIPbuttons with my own settings of the overlay on input 1. This would allow me to have 4 presets - just what I need: Left 16-9 left 4-3 right 16-9 richt 4-3 overlay.

But I can not adjust these settings: It would be great to be able to set them myself maybe by including these settings in the XML file where i can adjust them to my likings.

the settings are there: they are just fixed.
Please =! this feature request so grant can update to 8.2.1....

very happy with this little thing - good value for money and small in size...
Stefan - netherlands - happy streamer / recorder / mixer / editer
______________________________________________
vmix user, bmd: intensity, shuttle, mini recorder, duo2, akitio enclosure, canon xa25, sony: Alpha7ii, RX10, RX100v, BMD - pocket camera - video assist, gopro, fcpx, hollyland wireless, logitech spotlight...
Offline
User avatar

Roman Pytkin Pekarek

  • Posts: 1686
  • Joined: Tue Oct 30, 2012 1:11 pm
  • Location: SVK

Re: ATEM mini PIP settings in XLR file

PostSat Apr 04, 2020 12:27 pm

Program your own macros ..

When U have macros programmed, then U can use Elgato Streamdeck + Companion for run IT .. U can map this your 4 macros for 4 buttons and run it , when needed ..

Or Im using small behringer Xtouch MINI .. And I was programmed to control Size and Position or PIP window with potentiometers .. I will quickly move PIP window in preview , and show pip with AUTO button or slider ..

http://www.media-planet.sk
http://www.stonepp.tv
http://tally.pytkin.sk
Offline
User avatar

Stefan Flos

  • Posts: 31
  • Joined: Thu Aug 23, 2012 6:24 pm
  • Location: The Netherlands - Utrecht

Re: ATEM mini PIP settings in XLR file

PostSat Apr 04, 2020 2:14 pm

Hi Pytkin,

Thanks for the suggestion, but the task is not that big for a macro.

The idea is just that we have 4 buttons on the atem mini sitting there and they have pre defined settings - just push them aand you can see the Downstream key settings change.

I just think that since we have these buttons it would be nice if we can cusomise them with our own settings.

Anyway I now have set up my defaults and moving an overlay left to right is just a matter of removing or adding a - in the position X field.

Expanding my overlay is just a matter of setting size Y to 1...

Still - this leaves the PiP buttons useless. Rather assign this to these buttons. That's all. And if set to start-up state I don't even need my control laptop with software.

Hope you see my point and support it.

Cheers Stefan
______________________________________________
vmix user, bmd: intensity, shuttle, mini recorder, duo2, akitio enclosure, canon xa25, sony: Alpha7ii, RX10, RX100v, BMD - pocket camera - video assist, gopro, fcpx, hollyland wireless, logitech spotlight...
Offline
User avatar

Roman Pytkin Pekarek

  • Posts: 1686
  • Joined: Tue Oct 30, 2012 1:11 pm
  • Location: SVK

Re: ATEM mini PIP settings in XLR file

PostSat Apr 04, 2020 4:11 pm

yes I understand U .. I have similar problems .. I cannot fire DSK with titles .. That total stupid .. We are hope , that BMD can add setting in configuration , for FTB button .. Or 4 buttons up to CUT with change of duration on transition ..
http://www.media-planet.sk
http://www.stonepp.tv
http://tally.pytkin.sk
Offline

tjingrassia

  • Posts: 3
  • Joined: Fri Aug 07, 2020 8:53 pm
  • Real Name: TJ Ingrassia

Re: ATEM mini PIP settings in XLR file

PostTue Aug 18, 2020 2:14 pm

Yes, please Blackmagic, make the PIP buttons customizable! For 99% of people using these devices, the default PIPs will be useless. Seems like such a simple feature to add. Please!
Offline

Canyons

  • Posts: 44
  • Joined: Fri May 22, 2020 10:14 pm
  • Real Name: Charles Christopher

Re: ATEM mini PIP settings in XLR file

PostTue Aug 18, 2020 7:54 pm

Yes please.

Ability to change PIP defaults would be very helpful to support standalone Mini Pro usage.

Thank you!
Offline

tin921

  • Posts: 6
  • Joined: Tue Mar 31, 2020 11:43 pm
  • Real Name: tin lam

Re: ATEM mini PIP settings in XLR file

PostMon Oct 05, 2020 1:56 am

YES PLEASE! i really the 4 pip buttons customizable too! thank you!
Offline

GabetheCanuck

  • Posts: 1
  • Joined: Fri Oct 16, 2020 7:58 pm
  • Real Name: Gabriel Martin

Re: ATEM mini PIP settings in XLR file

PostFri Oct 16, 2020 8:06 pm

+1 Here!
I really could use this option to set the PiP defaults.

Return to Live Production

Who is online

Users browsing this forum: No registered users and 46 guests