Page 2 of 2

Re: ATEM Mini Pro AVAILABLE NOW!!

PostPosted: Wed May 20, 2020 2:25 pm
by Matt Certa
I received my Mini Pro from BH Photo yesterday. We defintely were not anywhere near the front of the line of pre orders.

Re: ATEM Mini Pro AVAILABLE NOW!!

PostPosted: Wed May 20, 2020 3:58 pm
by Denny Smith
Congratulations...

Re: ATEM Mini Pro AVAILABLE NOW!!

PostPosted: Thu May 21, 2020 12:01 am
by Cheryl Firestone
Matt Certa wrote:I received my Mini Pro from BH Photo yesterday. We defintely were not anywhere near the front of the line of pre orders.


How long ago did you order from BH?

Re: ATEM Mini Pro AVAILABLE NOW!!

PostPosted: Fri May 29, 2020 5:32 pm
by whdigital
Well, I've had my order in at B&H since April 19th. Last week on May 21st I put in an order at DVE Store. No joy from either yet, but whichever ships first will get the other one cancelled I guess. Maybe I should horde them both, LOL. What's frustrating is not know where we even sit in the order cues so we can plan accordingly. I tried adamantly with B&H and they just will not disclose that information. I don't blame them though as it could scare off subsequent orders I suppose. The real frustration is that BMD just didn't seem to have product actually in place worldwide when it as announce as "available now." :(. My business (unrelated to video) deals with A LOT of manufacturing and the pandemic just didn't hurt supply, even from China, like this so I'm hesitant to buy into that being the problem. Sorry, just venting!

Re: ATEM Mini Pro AVAILABLE NOW!!

PostPosted: Sat May 30, 2020 1:52 pm
by admasv
I feel the frustration finally i got it i am 4 days ahead of you

Re: ATEM Mini Pro AVAILABLE NOW!!

PostPosted: Sat May 30, 2020 5:38 pm
by Tbaker
I found a place that had them in stock and tried to share it here and the post was removed and I got a warning

Can someone explain why my profile was besmirched?

I was only trying to be helpful

Re: ATEM Mini Pro AVAILABLE NOW!!

PostPosted: Sat May 30, 2020 6:32 pm
by whdigital
admasv wrote:I feel the frustration finally i got it i am 4 days ahead of you


Good for you! Gives me hope it could be a bit sooner than later. :)

Re: ATEM Mini Pro AVAILABLE NOW!!

PostPosted: Sun May 31, 2020 12:36 am
by Denny Smith
Depends on who you referenced. I found some pirate units being sold below market from China. So perhaps the source you referenced was not an official dealer?

I got my Mini Pro in last week, works great so far with the testing I have done.
Cheers

Re: ATEM Mini Pro AVAILABLE NOW!!

PostPosted: Tue Jun 02, 2020 2:50 pm
by whdigital
Well, I still don't have anything in hand, but I wanted to chime in here and say that I'm impressed with DVE's level of communication. I asked where I sat in the order que and was given full disclosure right away, and then their system is emailing me to say projected delivery for all backorders is still a ways out and that I could contact them for viable alternatives if desired.

I'm going to keep poking the bear in hopes they are monitoring these boards though: BMD-what do you know/what are you doing about supply chain issues with this and your other products??

Ship Dates

PostPosted: Fri Jun 05, 2020 3:15 am
by rickbcurtis
Anyone from BMD that can speak into ATEM Mini Pro shipping dates. I have had an order in through Adorama forever and it's still backordered. Just a hint as to what we can expect??? I have a contract to set up two in-house studios and it's killing me to have everything but the pro. Thx.

Blackmagic ATEM Mini Pro availablility to purchase?

PostPosted: Sun Jun 07, 2020 4:37 pm
by Rob Hargreaves
When will the Blackmagic ATEM Mini Pro be available to purchase (in the UK for me)?
Thanks

Re: Blackmagic ATEM Mini Pro availablility to purchase?

PostPosted: Sun Jun 07, 2020 8:06 pm
by Marc Salvatore
I have one and two more on back order at B & H for a month now. Hopefully soon 8-)

Re: Blackmagic ATEM Mini Pro availablility to purchase?

PostPosted: Sun Jun 07, 2020 8:25 pm
by roger.magnusson

Back Order Issues

PostPosted: Tue Jun 09, 2020 1:30 pm
by McGoey76
What is happening with the Blackmagic Design ATEM Mini Pro I ordered mine about over 2 months ago from B&H in NYC and its still on back order?

Re: ATEM Mini Pro AVAILABLE NOW!!

PostPosted: Wed Jun 10, 2020 6:58 am
by Denny Smith
The issue is you ordered from B&H along with a 100K other people. I ordered in March from a small professional AV/ BMzd dealer and got mine last month in late May, took me almost three months to get. Try contacting some of the smaller USA dealers, not the large NYC guys. ;)

Re: ATEM Mini Pro AVAILABLE NOW!!

PostPosted: Wed Jun 10, 2020 1:39 pm
by Tbaker
Yes I got one a couple months back within a week by internet searching and found one at a smaller vendor

Re: ATEM Mini Pro AVAILABLE NOW!!

PostPosted: Wed Jun 10, 2020 2:55 pm
by whdigital
Just be careful to buy through an Authorized Dealer only! For anyone following along, mine finally shipped from B&H and arrived yesterday afternoon! They are trickling through at least...

Re: ATEM Mini Pro AVAILABLE NOW!!

PostPosted: Wed Jun 10, 2020 4:53 pm
by Frank Engel
I ordered mine from B&H on 4/22 and it shipped today.

Re: ATEM Mini Pro AVAILABLE NOW!!

PostPosted: Thu Jun 11, 2020 6:53 pm
by LMcCart
Ordered from Adorama in the middle of May and estimated ship date is now the third week of July.

Re: ATEM Mini Pro AVAILABLE NOW!!

PostPosted: Fri Jun 19, 2020 1:03 am
by joselogloria
Ordered mine from B&H on may 6th, shipped today, I read another post that took about 50 days, so its taking about 40 to 50 days for orders to be fulfilled, so be patienc. Mine will be home by monday.

Re: ATEM Mini Pro AVAILABLE NOW!!

PostPosted: Fri Jun 19, 2020 6:15 pm
by LMcCart
So last week, Adorama said that they expected to ship in the third week of July. Today I just got notified that they were packing up my order and sending via UPS by the end of today(6/19). I placed my order on May 14.