Mini Pro is only using 0.1Mb/s for streaming

Questions about ATEM Switchers, Camera Converter and everything live!
  • Author
  • Message
Offline

TaystMusic

  • Posts: 6
  • Joined: Tue May 19, 2020 12:35 am
  • Real Name: JEFF TAYLOR

Mini Pro is only using 0.1Mb/s for streaming

PostTue May 19, 2020 12:54 am

<I tried posting another thread but don't see it so re-posting issue>

I bought a new mini pro and although I have fast upload speeds over ethernet (see attached screenshots) the ATEM mini pro only is reporting 0.1 Mb/s and thus I cannot connect to any various streaming platforms.

I have no clue why. The switcher has a valid IP address on my network. Please advise next steps.

Thank you,
Attachments
Screen Shot 2020-05-18 at 5.48.40 PM.png
Screen Shot 2020-05-18 at 5.48.40 PM.png (47.8 KiB) Viewed 229 times
Screen Shot 2020-05-18 at 5.40.26 PM.png
Screen Shot 2020-05-18 at 5.40.26 PM.png (89.86 KiB) Viewed 229 times
Thank you,
Jeff Taylor
Offline

dmitrizigany

  • Posts: 46
  • Joined: Thu Mar 26, 2020 8:53 pm
  • Real Name: Dmitri Zigany

Re: Mini Pro is only using 0.1Mb/s for streaming

PostTue May 19, 2020 4:44 pm

What are you trying to stream? If you are just trying with a still image or so, it won't have to use much more even if set to higher quality...
Offline

TaystMusic

  • Posts: 6
  • Joined: Tue May 19, 2020 12:35 am
  • Real Name: JEFF TAYLOR

Re: Mini Pro is only using 0.1Mb/s for streaming

PostTue May 19, 2020 4:53 pm

I'm trying to stream a live 3 cam setup through the mini pro, using its built in encoder.
Thank you,
Jeff Taylor
Offline

Andrew J

  • Posts: 4
  • Joined: Fri May 15, 2020 7:59 pm
  • Real Name: Andrew Johnson

Re: Mini Pro is only using 0.1Mb/s for streaming

PostWed May 20, 2020 12:02 am

If the program output is a static scene the stream may use very little data. At .1Mbps you should notice a difference in data usage even simply transitioning back and form from two colors.

If that data usage is while there is video of a person talking, a nature scene or something with movement then something is strange about it.
Offline

TaystMusic

  • Posts: 6
  • Joined: Tue May 19, 2020 12:35 am
  • Real Name: JEFF TAYLOR

Re: Mini Pro is only using 0.1Mb/s for streaming

PostThu May 21, 2020 8:54 pm

SOLVED! :D

There was a setting I found in the gateway of the broadband device that should have been unchecked. Once unchecked and gateway rebooted, I was able to stream at 20+ MB/s

FIX_low bandwidth for ATEM mini pro.jpg
FIX_low bandwidth for ATEM mini pro.jpg (154.78 KiB) Viewed 131 times


Screen Shot 2020-05-21 at 1.47.23 PM.png
Screen Shot 2020-05-21 at 1.47.23 PM.png (29.94 KiB) Viewed 131 times


I have shared this fix with Blackmagic Design support team.
Thank you,
Jeff Taylor
Offline

TaystMusic

  • Posts: 6
  • Joined: Tue May 19, 2020 12:35 am
  • Real Name: JEFF TAYLOR

Re: Mini Pro is only using 0.1Mb/s for streaming

PostFri May 22, 2020 11:26 pm

SCRATCH THAT. It was not the xFinity router. It is the mini pro itself.

I got a brand new modem from xFinity (now support wifi 6 (AX)) but the mini pro still can't stream.

Check out the photo below
Attachments
20200522_162114.jpg
20200522_162114.jpg (405.51 KiB) Viewed 86 times
Thank you,
Jeff Taylor

Return to Live Production

Who is online

Users browsing this forum: Google [Bot], icm1812, shawn.hank and 18 guests