ISO Saving + Streaming + Software Control

Questions about ATEM Switchers, Camera Converter and everything live!
  • Author
  • Message
Offline

mediazone

  • Posts: 25
  • Joined: Mon Sep 28, 2020 1:05 pm
  • Real Name: Michael Jones

ISO Saving + Streaming + Software Control

PostMon Sep 28, 2020 1:18 pm

Hello, what is my best solution to still access software control, if I'm using the USB-C to save ISO's to a SSD? Do I buy a USB-C splitter, or should I leave USB-C port for SSD and connect to Software Control via ethernet?

1. ISO Files saved to SSD
2. Live stream (hdmi out to camlink?)
3. Still access software control

Do I need to connect over ethernet to be able to access the software control while saving the ISO's via USB-C out to SSD?
Mike - CoFounder of Media Zone
MediaZoneStudios.com
Offline

makeitwrite

  • Posts: 17
  • Joined: Thu Aug 27, 2020 8:36 pm
  • Real Name: ROBERT SEIBOTH

Re: ISO Saving + Streaming + Software Control

PostMon Sep 28, 2020 5:04 pm

Yes, we've been doing this for a few weeks since we got our ISO. Connect it to the network hardwire RJ45 port on the back to the network where your computer running Software Control is also connected. It should find it but if not, input the IP address of the mini. We also record the iso files to SSD and stream simultaneously through that same ethernet port with zero issues. So far we love this thing!

Bob

Return to Live Production

Who is online

Users browsing this forum: AvenellR and 53 guests