Wed Dec 09, 2020 12:44 am
I use 4 x Ursa Broadcasts with the ATEM CCU panel, but noticed that on the CCU panel you can only control gain in 6dB steps, whereas the camera has 2dB steps. This means that when the Ursa Broadcast is 2-way SDI linked with the CCU panel, you cannot select say +2dB. Any reason this feature is not reflected on the CCU?
It is quite critical when you want to remotely fine gain adjust. If you change to say +2dB directly on the camera, the CCU overrides it, so in essence you cannot make small gain changes when hitched to the CCU panel. Am I missing something, or have I found a software disparity? The cameras are on rev6.7 and the CCU on 8.1.1(if memory serves me correctly)
BTW it's my 60th birthday today, so a fix answer would be a good start to the day!
2 x Sony FX9, 2 x Sony FX6, 6 x Ursa Broadcasts, 2 x Canon CR-N500 PTZeds with MRMC auto-tracking, ATEM CCU, ATEM TV Studio 4K. NewTek Tricaster TC1 and 460. Dataton Watchout, Reckeen 3D Studio & vMix 4K