- Posts: 1
- Joined: Sun May 02, 2021 1:05 pm
- Real Name: Marius Wiese
Hi there,
I've just recived my DeckLink Duo 2 on friday. Today I wanted to try setting up OBS with the camera and so on but I'm not able to get a video Signal from my DeckLink card.
The actual setup is as following:
Sony A5100 -> BlackMagic Micro Converter HDMI - SDI -> DeckLink Duo 2
The Micro Converter is set to SDI Level A for 1080p60 and both leds light up.
In the Desktop Video Setup for the DeckLink card I've set the connectors to SDI 1 - 4 without combining channels 1&2 and 3&4. Because in the future I've planned with four cameras.
If I now add a new Blackmagic Device in OBS I just get a black Screen on all four SDI channels. If I just add a normal Video Device and then selecting the Blackmagic inputs it also shows just a black screen.
Do I have to change something more in the Video Setup or do you may have other tipps for getting the signal to OBS?
EDIT:
After hours of testing I found out, that I'm able to get a video signal from the Sony A5100 to OBS, but only if I set the camera to HDMI-Output 1080i. Then the DeckLink card shows an input of 1080i50. If I change that camera settings to 1080p I return to my black screen. When I connect a second PC via HDMI Out to the Converter I am able to get a signal at 720p60 & 1080p30 but at 1080p50/60 I get a black screen too.. Im nearly to belive the Micro Converter is not able to do 1080p60 even it is noticed in the specs
If I connect the Sony cam directly to a monitor it shows an input at 1080p50.
Anyone with ideas? Would really appreciate it
I've just recived my DeckLink Duo 2 on friday. Today I wanted to try setting up OBS with the camera and so on but I'm not able to get a video Signal from my DeckLink card.
The actual setup is as following:
Sony A5100 -> BlackMagic Micro Converter HDMI - SDI -> DeckLink Duo 2
The Micro Converter is set to SDI Level A for 1080p60 and both leds light up.
In the Desktop Video Setup for the DeckLink card I've set the connectors to SDI 1 - 4 without combining channels 1&2 and 3&4. Because in the future I've planned with four cameras.
If I now add a new Blackmagic Device in OBS I just get a black Screen on all four SDI channels. If I just add a normal Video Device and then selecting the Blackmagic inputs it also shows just a black screen.
Do I have to change something more in the Video Setup or do you may have other tipps for getting the signal to OBS?
EDIT:
After hours of testing I found out, that I'm able to get a video signal from the Sony A5100 to OBS, but only if I set the camera to HDMI-Output 1080i. Then the DeckLink card shows an input of 1080i50. If I change that camera settings to 1080p I return to my black screen. When I connect a second PC via HDMI Out to the Converter I am able to get a signal at 720p60 & 1080p30 but at 1080p50/60 I get a black screen too.. Im nearly to belive the Micro Converter is not able to do 1080p60 even it is noticed in the specs
If I connect the Sony cam directly to a monitor it shows an input at 1080p50.
Anyone with ideas? Would really appreciate it