Camer control
Posted: Fri Jul 16, 2021 4:40 am
So i am still learning a lot about these, but mostly only when we have events do i get to use them. so pardon my probable poor descriptions.
i have a studio cinema connected to a ATEM 1M/E production studio 4k. i am unable to control any of my cameras from the digital switcher.
i have SDI out from camera going into the 4th SDI in and the SDI in from the camera connected to the 2nd SDI out. XLR to ch 1, and HDMI out to my multiview. i am trying to adjust colors and such from the camera section of the switcher but cant seem to get it going. i have included a picture with arrows in case i described my setup poorly.
*edit for more info - i do get the camera's picture just fine on the switcher's built in screen and the multi view. I get the 4th channel lit up showing a connection in the "camera" and "audio" sections. i only hooked up the XLR to turn on the cameras mic and test to see if i get audio. which i do get audio.
i have a studio cinema connected to a ATEM 1M/E production studio 4k. i am unable to control any of my cameras from the digital switcher.
i have SDI out from camera going into the 4th SDI in and the SDI in from the camera connected to the 2nd SDI out. XLR to ch 1, and HDMI out to my multiview. i am trying to adjust colors and such from the camera section of the switcher but cant seem to get it going. i have included a picture with arrows in case i described my setup poorly.
*edit for more info - i do get the camera's picture just fine on the switcher's built in screen and the multi view. I get the 4th channel lit up showing a connection in the "camera" and "audio" sections. i only hooked up the XLR to turn on the cameras mic and test to see if i get audio. which i do get audio.