Not prompted to update to 8.6.2 firmware

Questions about ATEM Switchers, Camera Converter and everything live!
  • Author
  • Message
Offline

KenJohnson

  • Posts: 5
  • Joined: Sun Mar 07, 2021 8:40 pm
  • Real Name: Ken Johnson

Not prompted to update to 8.6.2 firmware

PostWed Jul 28, 2021 1:11 am

We installed the 8.6.2 software in hopes it might resolve an occasional crash issue we've had on recording and live streams since 8.6.

The software install went fine - and we can connect to the ATEM - but when we go to the setup panel, it shows the ATEM software version of 8.6.1 and doesn't prompt us to upgrade. Does 8.6.2 not come with firmware perhaps?

We confirmed the software itself installed is 8.6.2.

It is connected via Ethernet but that says it's supported for upgrades (and pretty sure we've upgraded via Ethernet most all previous updates).
Attachments
ATEMSoftwareControl.JPG
ATEMSoftwareControl.JPG (16.7 KiB) Viewed 727 times
ATEM8.6.2.JPG
ATEM8.6.2.JPG (31.37 KiB) Viewed 728 times
Offline

Ian Morrish

  • Posts: 580
  • Joined: Sun Jan 18, 2015 9:24 pm
  • Location: New Zealand

Re: Not prompted to update to 8.6.2 firmware

PostWed Jul 28, 2021 1:14 am

Firmware was only for Constellation and CCU panel. Other improvements were to the software application only.

Sent from my SM-G960F using Tapatalk
Regards,
Ian Morrish
Video Integrated Scripting Environment
(Windows PowerShell with ATEM driver + more)
https://ianmorrish.wordpress.com
Offline

Linden deCarmo

  • Posts: 309
  • Joined: Wed Jul 17, 2013 2:51 am

Re: Not prompted to update to 8.6.2 firmware

PostWed Jul 28, 2021 2:35 pm

Ian Morrish wrote:Firmware was only for Constellation and CCU panel. Other improvements were to the software application only.


Do you know if there have been any firmware updates for the ATEM 2 M/E Production Studio 4K since 8.5.3? After loading 8.6.2, ATEM Setup never advances past Connecting....

ATEM Software Control works fine and all other ATEM apps we run are fine also. See this thread for the details viewtopic.php?f=4&t=145009
Offline
User avatar

Xtreemtec

  • Posts: 5387
  • Joined: Wed Jan 02, 2013 11:48 am
  • Location: The Netherlands

Re: Not prompted to update to 8.6.2 firmware

PostThu Jul 29, 2021 10:13 am

Linden,

There never has been ANY update to the 2ME since 7,5 ;) Everything that has become after that the atem just sings along.. But no real firmware update is done in terms of real changes..

Waiting what happens tonight..
Daniel Wittenaar .:: Xtreemtec Media Productions ::. -= www.xtreemtec.nl =-
4K OBV Trailer, ATEM TVS HD, 4M/E Broadcast Studio 4K, Constelation 8K, Hyperdeck Studio 12G, Ursa Broadcast 4K, 4K fiber converters with Sony Control

Return to Live Production

Who is online

Users browsing this forum: No registered users and 48 guests