Please add audio delay for HDMI inputs on Atem Mini series
Posted: Sat Oct 16, 2021 4:25 pm
Hi,
It's great that we have the option to add audio delay to mic input signals on the Atem Mini series.
However, I really hope you can add the same adjustable audio delay feature for HDMI inputs as well.
For me, the main reason for asking this is to get rid of mic/audio input interference and noise issues. I've been having problems on multiple locations when connecting external audio to my Atem Mini & Atem Mini Pro ISO. Probably due to grounding issues and the fact that the mic inputs are unbalanced. The ground noise can get really loud with these Minis.
We could easily go around this issue by using optical S/PDIF audio together with an audio to HDMI embedder, effectively adding galvanic isolation and bypassing unnecessary D/A and A/D conversions. However using this method will of course offset the audio, and currently there's no way to fix this inside the Atem Mini's internal mixer.
In case there's not enough horsepower for this in the hardware, I'd really be ok to be able to delay two audio inputs only. Just add the option to select which ones.
Thank you for your work, and hopefully you'll be able to make this happen.
It's great that we have the option to add audio delay to mic input signals on the Atem Mini series.
However, I really hope you can add the same adjustable audio delay feature for HDMI inputs as well.
For me, the main reason for asking this is to get rid of mic/audio input interference and noise issues. I've been having problems on multiple locations when connecting external audio to my Atem Mini & Atem Mini Pro ISO. Probably due to grounding issues and the fact that the mic inputs are unbalanced. The ground noise can get really loud with these Minis.
We could easily go around this issue by using optical S/PDIF audio together with an audio to HDMI embedder, effectively adding galvanic isolation and bypassing unnecessary D/A and A/D conversions. However using this method will of course offset the audio, and currently there's no way to fix this inside the Atem Mini's internal mixer.
In case there's not enough horsepower for this in the hardware, I'd really be ok to be able to delay two audio inputs only. Just add the option to select which ones.
Thank you for your work, and hopefully you'll be able to make this happen.