ATEM cameracontrol kills incamera recording

Questions about ATEM Switchers, Camera Converter and everything live!
  • Author
  • Message
Offline
User avatar

Mark Foster

  • Posts: 2089
  • Joined: Tue Oct 27, 2015 10:59 am
  • Location: austria - no kangaroos +g*

ATEM cameracontrol kills incamera recording

PostThu Nov 25, 2021 4:16 pm

yesterday a livestream by means of ATEM mini extreme and a BMPCC 6kpro.

my previous solution to disable the camera control with the
bidirectional micro converter also failed by using the new 3G converter.

so the 6k pro again directly to the ATEM and thus I started the stream.

we also always record this in the camera, but yesterday it was so that the camera
interrupted the recording every moment.

was used as always an angelbird CF pro Cfast2.0 card.
was recorded, due to the limitation by the camera control in 6kdci BRAW with 25fps.

in the evening after the stream i did some tests to see if the camera (was used the first time)
or the card was the problem.

without connecting to the ATEM, recordings up to the full capacity of the card were
possible without interruption.

as soon as the HDMI cable was reconnected to the camera, the interruptions were back.

but when using the old bidirectional converter, the camera control was deactivated again.
(for setup see at the old picture)

so i ask BMD to take care of this problem and finally give us the possibility to prevent
the camera control either in the ATEM software or in the camera.

but also the possibility to use again at control of the camera via the ATEM recording in prores,
because here the BRAW 6k files are unnecessary and a madness!!!!

ATEM mini extreme firmware 8.6.1
ATEM software control 8.6.4
BMPCC 6k pro firmware 7.3.1
micro biconverter 3G firmware 7.5.3
micro biconverter firmware (latest ??? - cannot see in the app - but should 7.3.2)

.
old picture of a working setup without camera control:
Attachments
IMG_6222.jpeg
IMG_6222.jpeg (304.97 KiB) Viewed 2095 times
cMP 5.1 2x3,46/96GB/2x2TB SSD/4x4TB/7101A 4x2TB 970evo+/HP1344/BMD4k/RadeonVII
macOS 12.6.3
BMPCC 6k pro (7.9.1)
meike s35 cine 25mm, 35mm, 50mm, 75mm
resolve studio 18.1.4
mini panel
speed editor
desktop video 12.1
intensity pro 4k
atem extreme (8.6.1)
Offline

BennoZ

  • Posts: 449
  • Joined: Sat Feb 03, 2018 2:42 pm
  • Real Name: Benno Zwanenburg

Re: ATEM cameracontrol kills incamera recording

PostThu Nov 25, 2021 8:18 pm

Can’t you use a HDMI CEC killer?
Offline
User avatar

Mark Foster

  • Posts: 2089
  • Joined: Tue Oct 27, 2015 10:59 am
  • Location: austria - no kangaroos +g*

Re: ATEM cameracontrol kills incamera recording

PostFri Nov 26, 2021 1:25 pm

BennoZ wrote:Can’t you use a HDMI CEC killer?


unfortunately i don't have any of these devices, because this problem didn't occur until now : -(

have now ordered some.

however, this does not change the recording aborts when the camera control is active!



.
Last edited by Mark Foster on Fri Nov 26, 2021 1:32 pm, edited 1 time in total.
cMP 5.1 2x3,46/96GB/2x2TB SSD/4x4TB/7101A 4x2TB 970evo+/HP1344/BMD4k/RadeonVII
macOS 12.6.3
BMPCC 6k pro (7.9.1)
meike s35 cine 25mm, 35mm, 50mm, 75mm
resolve studio 18.1.4
mini panel
speed editor
desktop video 12.1
intensity pro 4k
atem extreme (8.6.1)
Offline

BennoZ

  • Posts: 449
  • Joined: Sat Feb 03, 2018 2:42 pm
  • Real Name: Benno Zwanenburg

Re: ATEM cameracontrol kills incamera recording

PostFri Nov 26, 2021 1:31 pm

It’s not a device:

https://www.onlinekabelshop.nl/hdmi-cec-killer-versie-1-4?gclid=EAIaIQobChMIi_mZsZG29AIV5Y1oCR0soAAfEAQYAiABEgI6tPD_BwE

I use it when connecting my MacBook 2011 to the Atem: no remote control without this CEC killer.
Offline

eMilty

  • Posts: 164
  • Joined: Mon Oct 22, 2018 9:54 pm
  • Location: The Netherlands
  • Real Name: Marco Miltenburg

Re: ATEM cameracontrol kills incamera recording

PostSat Nov 27, 2021 8:16 am

Why do you have the output of the ATEM Mini connected to the input of the 3G micro converter? This should not be necessary if you only want camera control. The ATEM Mini can speak bi-directional over HDMI. The two SDI connections are indeed necessary.
Offline

BennoZ

  • Posts: 449
  • Joined: Sat Feb 03, 2018 2:42 pm
  • Real Name: Benno Zwanenburg

Re: ATEM cameracontrol kills incamera recording

PostSat Nov 27, 2021 8:22 am

That’s to see return video.
Offline
User avatar

Mark Foster

  • Posts: 2089
  • Joined: Tue Oct 27, 2015 10:59 am
  • Location: austria - no kangaroos +g*

Re: ATEM cameracontrol kills incamera recording

PostSat Nov 27, 2021 11:32 am

eMilty wrote:Why do you have the output of the ATEM Mini connected to the input of the 3G micro converter? This should not be necessary if you only want camera control. The ATEM Mini can speak bi-directional over HDMI. The two SDI connections are indeed necessary.


with the old converter it will kill the camera control - but not on the new 3G :- (
i don't want camera control!

i do the stream without the converter - direct HDMI-HDMI
and the incamera record stops every 49 sec.
cMP 5.1 2x3,46/96GB/2x2TB SSD/4x4TB/7101A 4x2TB 970evo+/HP1344/BMD4k/RadeonVII
macOS 12.6.3
BMPCC 6k pro (7.9.1)
meike s35 cine 25mm, 35mm, 50mm, 75mm
resolve studio 18.1.4
mini panel
speed editor
desktop video 12.1
intensity pro 4k
atem extreme (8.6.1)
Offline
User avatar

Mark Foster

  • Posts: 2089
  • Joined: Tue Oct 27, 2015 10:59 am
  • Location: austria - no kangaroos +g*

Re: ATEM cameracontrol kills incamera recording

PostSat Nov 27, 2021 11:33 am

BennoZ wrote:That’s to see return video.


no, the old converter kills in this config CEC over HDMI

i forgot that the new 3G allow CEC : -(
cMP 5.1 2x3,46/96GB/2x2TB SSD/4x4TB/7101A 4x2TB 970evo+/HP1344/BMD4k/RadeonVII
macOS 12.6.3
BMPCC 6k pro (7.9.1)
meike s35 cine 25mm, 35mm, 50mm, 75mm
resolve studio 18.1.4
mini panel
speed editor
desktop video 12.1
intensity pro 4k
atem extreme (8.6.1)
Offline
User avatar

Mark Foster

  • Posts: 2089
  • Joined: Tue Oct 27, 2015 10:59 am
  • Location: austria - no kangaroos +g*

Re: ATEM cameracontrol kills incamera recording

PostSat Nov 27, 2021 7:47 pm

but, no one else has these problems with recording stop?

.
cMP 5.1 2x3,46/96GB/2x2TB SSD/4x4TB/7101A 4x2TB 970evo+/HP1344/BMD4k/RadeonVII
macOS 12.6.3
BMPCC 6k pro (7.9.1)
meike s35 cine 25mm, 35mm, 50mm, 75mm
resolve studio 18.1.4
mini panel
speed editor
desktop video 12.1
intensity pro 4k
atem extreme (8.6.1)
Offline
User avatar

Mark Foster

  • Posts: 2089
  • Joined: Tue Oct 27, 2015 10:59 am
  • Location: austria - no kangaroos +g*

Re: ATEM cameracontrol kills incamera recording

PostSun Nov 28, 2021 10:00 pm

so, after a few tests more:

the recording failure does not affect my 4k with firmware 7.3,
but only the 6k pro with firmware 7.3.1
cMP 5.1 2x3,46/96GB/2x2TB SSD/4x4TB/7101A 4x2TB 970evo+/HP1344/BMD4k/RadeonVII
macOS 12.6.3
BMPCC 6k pro (7.9.1)
meike s35 cine 25mm, 35mm, 50mm, 75mm
resolve studio 18.1.4
mini panel
speed editor
desktop video 12.1
intensity pro 4k
atem extreme (8.6.1)
Offline
User avatar

Mark Foster

  • Posts: 2089
  • Joined: Tue Oct 27, 2015 10:59 am
  • Location: austria - no kangaroos +g*

Re: ATEM cameracontrol kills incamera recording

PostMon Nov 29, 2021 9:29 am

the new firmware update 7.5.1 should have fixed the problem ;- )


.
cMP 5.1 2x3,46/96GB/2x2TB SSD/4x4TB/7101A 4x2TB 970evo+/HP1344/BMD4k/RadeonVII
macOS 12.6.3
BMPCC 6k pro (7.9.1)
meike s35 cine 25mm, 35mm, 50mm, 75mm
resolve studio 18.1.4
mini panel
speed editor
desktop video 12.1
intensity pro 4k
atem extreme (8.6.1)

Return to Live Production

Who is online

Users browsing this forum: Joseph Villegas and 33 guests