Sun Sep 25, 2022 12:27 pm
I use a Skaarhoj ETH-GPI Link Dual interface. With that you can program your GPI and tally on the Atem, RP150 and UE150 camera's. If I select a camera on the RP150, aux 1 of the Atem switches to that camera. I can see witch camera is actual on the RP150 and the Tally lichts on that camera comes on. I also use a some wired tally's for teleprompter camera, PowerPoint laptop or Propresenter playout. The ETH-GPI uses hard wired in and outputs, but can talk to all other stuff via IP (Atem, Hyperdeck, matrix etc). You have to make a customized cable to connect to the RP150.
The BMD Tally interface also works, but you have to make a special cable to connect to the RP150. And will only work for camera tally.
If you only want to use a tally for the camera's you can simply run Companion. You don't have to use a streamdeck or special cables.
Atem 4M/E 8K; Atem 4M/E 4K; 10x Panasonic PTZ camera's; Panasonic RP150 Controller; Panasonic RP 60 controller; 3x Panasonic PX270; 3x Hyperdeck mini; Cleanswitch 12x12; Smartscope 4K; Videoassist 4k