Atem Extreme ISO record start stop trigger Field Mixers?

Questions about ATEM Switchers, Camera Converter and everything live!
  • Author
  • Message
Offline

fhuq8618

  • Posts: 6
  • Joined: Fri Nov 25, 2022 5:56 pm
  • Real Name: Fahim Huq

Atem Extreme ISO record start stop trigger Field Mixers?

PostTue Dec 06, 2022 4:02 pm

I'm specifically curious about the Sound Devices Mixpre 3 / 6 / 10 or the Tascam 701D.

Mixpre 3 has mini HDMI and Tascam 701D has a full HDMI input.

The Tascam can be triggered from a BMPCC4k - I've tested this -- so I'm assuming it's compatible with Blackmagic's HDMI start/stop flag.

Wondering if it's possible from the ATEM extreme ISO so I can push One button and roll cameras and sound.


Thanks.
Offline

fhuq8618

  • Posts: 6
  • Joined: Fri Nov 25, 2022 5:56 pm
  • Real Name: Fahim Huq

Re: Atem Extreme ISO record start stop trigger Field Mixers?

PostWed Jun 07, 2023 6:23 pm

Just wanted to add an answer to my own question since i solved the problem somewhat :
I had to take out the ultra syncs out of the equation.
I used a Jtech splitter to split the signal coming out of the Atem mini to send the timecode to the Audio recorder. that was the only way I could get all the gear to be on the same timecode (atem mini's).
I can trigger recording on the cameras from the atem , but that does not trigger the audio recorder. I have to start recording audio first, and then start recording the cameras.
hope this helps someone.

Return to Live Production

Who is online

Users browsing this forum: adamtow and 47 guests