- Posts: 1
- Joined: Tue Jan 17, 2023 3:00 pm
- Real Name: Al Findlay
Hello clever people!
I'm a long time user and lurker but first time poster. I very much enjoy the tech advice here so hope I can contribute somehow in the future.
I wonder if anyone can help with this; I've seen some similar threads but they don't come to any conclusion and I don't want to hijack an old post.
I have ATEM mini 4 ch and also Mini Extremes and I cannot get any of them to work with my small 13.3" folding LCD screens (cheap WIMAXIT model), either as M/V or program using HDMI 1 or 2 outputs. I'd love to be able to use them as M/V or even as program output as small comfort monitors on lecterns, but they give a messy corrupted image and/or "mode not supported"
I've recently borrowed an ASUS folding 15.6" and that seemed to work okay after a bit of start-up wobble. Then I went to buy the same from Amazon and that failed to work too.
Does anyone know if there is a way to change the output resolution or fps on the ATEM mini? I've searched the settings but cannot find anything.
Does anyone know why the small folding screens don't show the HDMI output of my ATEMs? I have tested the screens with my laptop on all resolutions and they seem to work fine at 30hz 29hz, 59.9 hz, 50hz 60hz etc
Could anyone recommend a nice cheap folding screen that does work well with the ATEM minis?
Thanks in advance and peace to all.
Al
I'm a long time user and lurker but first time poster. I very much enjoy the tech advice here so hope I can contribute somehow in the future.
I wonder if anyone can help with this; I've seen some similar threads but they don't come to any conclusion and I don't want to hijack an old post.
I have ATEM mini 4 ch and also Mini Extremes and I cannot get any of them to work with my small 13.3" folding LCD screens (cheap WIMAXIT model), either as M/V or program using HDMI 1 or 2 outputs. I'd love to be able to use them as M/V or even as program output as small comfort monitors on lecterns, but they give a messy corrupted image and/or "mode not supported"
I've recently borrowed an ASUS folding 15.6" and that seemed to work okay after a bit of start-up wobble. Then I went to buy the same from Amazon and that failed to work too.
Does anyone know if there is a way to change the output resolution or fps on the ATEM mini? I've searched the settings but cannot find anything.
Does anyone know why the small folding screens don't show the HDMI output of my ATEMs? I have tested the screens with my laptop on all resolutions and they seem to work fine at 30hz 29hz, 59.9 hz, 50hz 60hz etc
Could anyone recommend a nice cheap folding screen that does work well with the ATEM minis?
Thanks in advance and peace to all.
Al