Input doesn't work

Questions about ATEM Switchers, Camera Converter and everything live!
  • Author
  • Message
Offline

Diego Alba

  • Posts: 3
  • Joined: Mon Mar 13, 2023 4:33 pm
  • Real Name: Diego Alba

Input doesn't work

PostMon Mar 13, 2023 4:57 pm

I have a problem with a atem mini pro, i can use all the inputs of the cameras except the number 1. We try with differents cameras, cables and doesn;t work. The last year i send the atem mini pro for warranty, and the conclusion is that the input 1 works normally but when i use it doesn't work. I think that is something of configuration or sometime like that. I want some advice because i use the anothers inputs but i need to use that input too.
Thanks
Offline
User avatar

detlev

  • Posts: 13
  • Joined: Fri Feb 24, 2023 11:15 am
  • Real Name: Detlev Habicht

Re: Input doesn't work

PostTue Mar 14, 2023 7:41 am

The first input is different. It has also not the same chip as the other inputs. Maybe your hardware don't work with this chip. (I had a similar problem with a HDMI converter.)

Detlev
Detlev Habicht
Institute of Microelectronic Systems
Leibniz Universität Hannover
Offline

Diego Alba

  • Posts: 3
  • Joined: Mon Mar 13, 2023 4:33 pm
  • Real Name: Diego Alba

Re: Input doesn't work

PostTue Mar 14, 2023 4:18 pm

Thanks Dtelev, i change the hardware too and the problem continue, i don't know what is the mean problem. Thanks for any solution or advice
Offline

Jim Simon

  • Posts: 29796
  • Joined: Fri Dec 23, 2016 1:47 am

Re: Input doesn't work

PostSun Mar 19, 2023 4:42 pm

What cameras are you using?
My Biases:

You NEED training.
You NEED a desktop.
You NEED a calibrated (non-computer) display.
Offline

Diego Alba

  • Posts: 3
  • Joined: Mon Mar 13, 2023 4:33 pm
  • Real Name: Diego Alba

Re: Input doesn't work

PostFri Mar 24, 2023 4:55 pm

HI Jim, I use a Sonya 6400 and Panasonic AGAC30. the problem is that the atem mini pro doesn´t work with any hardware, i only know that the atem mini is ok because i send for warranty and all is ok.

Return to Live Production

Who is online

Users browsing this forum: No registered users and 40 guests