Since a few FW versions back it is possible to set up a Videohub Router panel to control AUX ports of the Atem Constellation and Atem Mini series.
Now building a setup for my router panels i find that there is a big lack of information about this. It's not documented in the Manuals from videohub nor Atem as far as i can find.
So Documenting my findings here for others to find.
Constellation 8K FW 8.6.4
Videohub FW 7.0.8
Basically follows the numbers based on all sources that you can route to the Aux outputs in the order they are displayed.. But to make it easier for the users i wrote them out.
-Input array is -1 based. Meaning that if you call input 1. Actually selects Black at the Atem. Calling 2 will call input 1. Which adds a certain complexity for the normal user base.
1 = Black
2 = Input 1
3 = Input 2
Etc Etc
40 = Input 39
41 = Input 40
42 = Bars
43 = Color 1
44 = Color 2
45 = Media Player 1
46 = Media Player 1 Key
47 = Media Player 2
48 = Media Player 2 Key
49 = Media Player 3
50 = Media Player 3 Key
51 = Media Player 4
52 = Media Player 4 Key
53 = ME 1 Key 1 Mask
54 = ME 1 Key 2 Mask
55 = ME 1 Key 3 Mask
56 = ME 1 Key 4 Mask
57 = ME 2 Key 1 Mask
58 = ME 2 Key 2 Mask
59 = ME 2 Key 3 Mask
60 = ME 2 Key 4 Mask
61 = ME 3 Key 1 Mask
62 = ME 3 Key 2 Mask
63 = ME 3 Key 3 Mask
64 = ME 3 Key 4 Mask
65 = ME 4 Key 1 Mask
66 = ME 4 Key 2 Mask
67 = ME 4 Key 3 Mask
68 = ME 4 Key 4 Mask
69 = DSK 1 Mask
70 = DSK 2 Mask
71 = DSK 3 Mask
72 = DSK 4 Mask
73 = SuperSource 1
74 = SuperSource 2
75 = Cleanfeed 1
76 = Cleanfeed 2
77 = Cleanfeed 3
78 = Cleanfeed 4
79 = ME 1 PGM
80 = ME 1 PRV
81 = ME 2 PGM
82 = ME 2 PRV
83 = ME 3 PGM
84 = ME 3 PRV
85 = ME 4 PGM
86 = ME 4 PRV
Unfortunatly you can not acces the MV outputs on the internal Matrix.
Now building a setup for my router panels i find that there is a big lack of information about this. It's not documented in the Manuals from videohub nor Atem as far as i can find.
So Documenting my findings here for others to find.
Constellation 8K FW 8.6.4
Videohub FW 7.0.8
Basically follows the numbers based on all sources that you can route to the Aux outputs in the order they are displayed.. But to make it easier for the users i wrote them out.
-Input array is -1 based. Meaning that if you call input 1. Actually selects Black at the Atem. Calling 2 will call input 1. Which adds a certain complexity for the normal user base.
1 = Black
2 = Input 1
3 = Input 2
Etc Etc
40 = Input 39
41 = Input 40
42 = Bars
43 = Color 1
44 = Color 2
45 = Media Player 1
46 = Media Player 1 Key
47 = Media Player 2
48 = Media Player 2 Key
49 = Media Player 3
50 = Media Player 3 Key
51 = Media Player 4
52 = Media Player 4 Key
53 = ME 1 Key 1 Mask
54 = ME 1 Key 2 Mask
55 = ME 1 Key 3 Mask
56 = ME 1 Key 4 Mask
57 = ME 2 Key 1 Mask
58 = ME 2 Key 2 Mask
59 = ME 2 Key 3 Mask
60 = ME 2 Key 4 Mask
61 = ME 3 Key 1 Mask
62 = ME 3 Key 2 Mask
63 = ME 3 Key 3 Mask
64 = ME 3 Key 4 Mask
65 = ME 4 Key 1 Mask
66 = ME 4 Key 2 Mask
67 = ME 4 Key 3 Mask
68 = ME 4 Key 4 Mask
69 = DSK 1 Mask
70 = DSK 2 Mask
71 = DSK 3 Mask
72 = DSK 4 Mask
73 = SuperSource 1
74 = SuperSource 2
75 = Cleanfeed 1
76 = Cleanfeed 2
77 = Cleanfeed 3
78 = Cleanfeed 4
79 = ME 1 PGM
80 = ME 1 PRV
81 = ME 2 PGM
82 = ME 2 PRV
83 = ME 3 PGM
84 = ME 3 PRV
85 = ME 4 PGM
86 = ME 4 PRV
Unfortunatly you can not acces the MV outputs on the internal Matrix.
Daniel Wittenaar .:: Xtreemtec Media Productions ::. -= www.xtreemtec.nl =-
4K OBV Trailer, ATEM TVS HD, 4M/E Broadcast Studio 4K, Constelation 8K, Hyperdeck Studio 12G, Ursa Broadcast 4K, 4K fiber converters with Sony Control
4K OBV Trailer, ATEM TVS HD, 4M/E Broadcast Studio 4K, Constelation 8K, Hyperdeck Studio 12G, Ursa Broadcast 4K, 4K fiber converters with Sony Control