Gary Adams wrote:There is nothing to set up. I'll offer one last self test to see if the return 2 registers with the camera. With nothing connected to Return 1 or 2, view the output output of the HDMI which will be the camera direct as you know. Take an SDI cable and directly connect the SDI 1 Output on the back of the Studio Converter to Return 2 while watching the HDMI. When connected after a few seconds, the HDMI output should blank out and come back with the same camera feed, only now it would be the feed from the Output rather than internal. I am curious to see if you see the HDMI blank out for a few seconds. This is an indication that it is switching to Return 2.
Gary
Thanks very much, Gary. I tried what you mentioned and it did disrupt the HDMI out video briefly. I then tried the SDI output from one of my other Studio Converters and that passed through to the HDMI output on the camera I've been testing. I went back and found the setting for 1080p on my PC, enabled that, and now I have the output of the Return Video 2 input properly outputting from the HDMI on the camera.
Apparently the resolution on the source has to be 1080p. I thought that since I was seeing the image on the SC front LCD screen then it would pass along to the camera's HDMI output, but apparently the source has to exactly match the default HDMI output format (1080p).
Thanks for your help!