- Posts: 1
- Joined: Thu Jul 11, 2024 1:29 pm
- Real Name: Chris Binder
Thu Jul 11, 2024 1:40 pm
Hi guys,
I am using a Hollyland C1 Pro Hub together with an Blackmagic ATEM Production Studio 2M/E. We would like to combine the Blackmagic Talkback Function with the Hollyland Hub. The Hollyland C1 Pro Hub has a 4 Wire Interface. So we made a cable RJ45 <-> XLR IN+OUT. It does work, but everything you say in the Hollyland Microphones is coming back really loud to yourself (because the ATEM Talkback sends it back into the system). Its like a really really loud sidetone (with a slight delay) which is really annoying.
Is there anything I can do to prevent this?
best wishes!
I am using a Hollyland C1 Pro Hub together with an Blackmagic ATEM Production Studio 2M/E. We would like to combine the Blackmagic Talkback Function with the Hollyland Hub. The Hollyland C1 Pro Hub has a 4 Wire Interface. So we made a cable RJ45 <-> XLR IN+OUT. It does work, but everything you say in the Hollyland Microphones is coming back really loud to yourself (because the ATEM Talkback sends it back into the system). Its like a really really loud sidetone (with a slight delay) which is really annoying.
Is there anything I can do to prevent this?
best wishes!