How to remove hood from 4k Studio Camera
Posted: Sun Jul 28, 2024 1:54 pmHow do you get the hood off without damaging the camera?
The G1 has 6 thumbscrews, the G2 has a lever/tab release.
Good Luck
Blackmagic Forum
https://forum.blackmagicdesign.com/
How to remove hood from 4k Studio Camera
https://forum.blackmagicdesign.com/viewtopic.php?f=4&t=205535
Page 1 of 1
Posted: Sun Jul 28, 2024 1:54 pmRe: How to remove hood from 4k Studio Camera
Posted: Sun Jul 28, 2024 6:20 pmRe: How to remove hood from 4k Studio Camera
Posted: Mon Jul 29, 2024 2:03 amHoward Roll wrote:The G1 has 6 thumbscrews, the G2 has a lever/tab release.
Good Luck
The camera is at the church
I will look for those thumpscrews.
Thanks
Re: How to remove hood from 4k Studio Camera
Posted: Wed Jul 31, 2024 4:05 pmThere are 4 metric Allen screws on the camera nearly in line with the hood but they do NOT connect to the hood.
It mearly pops in and out
I used a flat screw driver to pry it off
It mearly pops in and out
I used a flat screw driver to pry it off