![Offline Offline](./styles/bmd_universal/imageset/en/icon_user_offline.png)
- Posts: 7
- Joined: Mon Jun 03, 2013 10:49 pm
Howdy,
I have had an intermittent issue that I haven't been able to pin point.
We have a 4k Broadcast switcher that is loosing connection between the Broadcast Panels (2 - 1 M/E panels) and the computer connected to the switcher.
It has happened 3 Sundays in a row, about the same time of day. We have run 3 of our services and then just before our fourth, everything disconnects. The only thing the remedies the issue is a power cycle of the switcher.
The temperature of the box seems normal, not too hot to the touch, and it's well vented in the rack. The System is on a Cisco SG300 switch and we are running 7.2 firmware on the ATEM.
This is a new issue since we've moved to 7.2. Are there any other instances of this happening out there?
I've seen comments about "maximum network connections" but I haven't been able to find any exact for that.
Connected to the switcher we have:
2 - Broadcast panels
1 - Control compter
1 - iPad (for remote control)
2 - iPods (for Tally)
I can't imagine that 6 connections would freak it out.
I am thinking of rolling back the firmware to see if that helps. Any other thoughts out there?
Thanks!
I have had an intermittent issue that I haven't been able to pin point.
We have a 4k Broadcast switcher that is loosing connection between the Broadcast Panels (2 - 1 M/E panels) and the computer connected to the switcher.
It has happened 3 Sundays in a row, about the same time of day. We have run 3 of our services and then just before our fourth, everything disconnects. The only thing the remedies the issue is a power cycle of the switcher.
The temperature of the box seems normal, not too hot to the touch, and it's well vented in the rack. The System is on a Cisco SG300 switch and we are running 7.2 firmware on the ATEM.
This is a new issue since we've moved to 7.2. Are there any other instances of this happening out there?
I've seen comments about "maximum network connections" but I haven't been able to find any exact for that.
Connected to the switcher we have:
2 - Broadcast panels
1 - Control compter
1 - iPad (for remote control)
2 - iPods (for Tally)
I can't imagine that 6 connections would freak it out.
I am thinking of rolling back the firmware to see if that helps. Any other thoughts out there?
Thanks!
Jon Huff
Technical Director
Canyon Hills Church
Bothell, WA
Technical Director
Canyon Hills Church
Bothell, WA