Wireless ATEM Switcher to 4k Camera CCU control

We just purchased a BMD ATEM Studio Switcher 4K with 3 BMD Studio 4K Cameras. Each camera is connected to the switcher with 2 SDI Coax wires. One wire sends the video/audio to the switcher. The second wire brings control data from the switcher to the camera.

We want to make one of the cameras wireless. We learned that we can use a device such as the CV Pro200 to send video to the switcher wirelessly. However, we have not been able to find a device that can send the control data from the switcher to the camera wirelessly.

We are hoping that someone can make a suggestion.

Yes we are developing a product called WRCU. (Wireless Remote Control Unit) We have a working prototype but still a lot of software has to be done.

viewtopic.php?f=4&t=91016&p=508264#p508264

This is awesome:

Will the WRCU function with the ATEM to BM Studio Camera 4K?

All BMD cameras that have CCU function with the Atem can also be used with this. As long as it has a SDI input were you normally input the CCU function of the BMD camera

Greetings xtreemtec

Just wanted to let you know that we are available to help with your WRCU development and/or testing. We have two BMD Studio 4K cameras connected wirelessly to our ATEM switcher, but have no wireless way to connect the return from the ATEM to the camera. We look forward to the development of your WRCU and hope to implement it on our cameras in the future

Greetings...
Wondering if there has been any advances to the wireless camera control using a ATEM Mini switch? We tend to use a mobile camera that transmits video wirelessly to the switch but want to have the ability to have the remote Pocket 4K/6K camera start recording when you press record on the ATEM (So we could have the ability to easily replace the 1080 footage to 4k or 6k in our post production).

We currently use the Teradek Bolt 500 system for the wireless transmission.