CFast cards for 4.6 URSA/MINI

The place for questions about shooting with Blackmagic Cameras.
  • Author
  • Message
Offline
User avatar

Subrata Senn

  • Posts: 581
  • Joined: Sun Mar 09, 2014 5:22 am
  • Location: Kolkata, India

CFast cards for 4.6 URSA/MINI

PostSat Mar 19, 2016 4:31 am

Since Ursa Mini 4.6 are shipping, the question is what are the Cfast cards to go for?
The approved list is yet to show CFast cards that will record 4.6K Prores and 4.6K Raw.
I hope BMD will soon add cards to its list. I remember I had problems with SSDs when I bought my BMPC4K. There was no approved list for BMPC. Assuming that the cards listed for BMCC would run on BMPC too, I landed up with dropped frames!
Independent filmmaker/producer
Owner of post production facility for cinema including grading and creation of DCPs.
Offline
User avatar

Ivon Visalli

  • Posts: 305
  • Joined: Thu Jun 18, 2015 2:17 am
  • Location: California, USA

Re: CFast cards for 4.6 URSA/MINI

PostSat Mar 19, 2016 4:55 am

Excellent point. Now that that mini 4.6 is released, is there a list of approved cards to use for raw? For ProRes?
Offline
User avatar

rick.lang

  • Posts: 17156
  • Joined: Wed Aug 22, 2012 5:41 pm
  • Location: Victoria BC Canada

CFast cards for 4.6 URSA/MINI

PostSat Mar 19, 2016 5:03 am

Yes, but the last update I saw is nine months old, June 15, 2015! The Lexar 3400x cards are there but they should say "discontinued"and the replacement cards, 3500x and 3600x, have not been approved yet by BMD. ARRI has approved the 3600x cards and failed the 3500x cards.


Sent from my iPad using Tapatalk
Rick Lang
Offline
User avatar

rick.lang

  • Posts: 17156
  • Joined: Wed Aug 22, 2012 5:41 pm
  • Location: Victoria BC Canada

CFast cards for 4.6 URSA/MINI

PostTue Mar 22, 2016 7:44 pm

We have just had a report in another thread of failed media when using the Lexar 3600x cards in dual record mode. The problem apparently was repeatable. Don't have any other details, but this is worrisome.

Edit: perhaps the reference to 3600x cards was a typo and should be 3400x cards.

Sent from my iPad using Tapatalk
Last edited by rick.lang on Tue Mar 22, 2016 8:18 pm, edited 1 time in total.
Rick Lang
Offline
User avatar

Scott Stacy

  • Posts: 957
  • Joined: Sun Apr 28, 2013 4:02 pm
  • Location: Kansas City

Re: CFast cards for 4.6 URSA/MINI

PostTue Mar 22, 2016 7:52 pm

rick.lang wrote:We have just had a report in another thread of failed media when using the Lexar 3600x cards in dual record mode. The problem apparently was repeatable. Don't have any other details, but this is worrisome.


Sent from my iPad using Tapatalk


Are you referring to this, Rick? "I've been using 128gig Lexar 3400x cards with the ursa 4k for a while, and they only work flawlessly when I use one card at a time. On two occasions when I have cards in both slots, when one gets full and the camera starts using the second card, the first card gets corrupt. I've been able to restore most, not all of the data from the first card by using diskdoctor, but it's definitely a repeatable problem." This was someone commenting on my thread about 3600x cards but he mentions the 3400x and not the 3600x.

Another post down the thread, we have this: "Got a pair of 3600x 256gb on my um4k. I've nothing to say about them, they just work fine. But I see no reason to buy them in case you have no dropped frames using 3400x."
Scott Stacy, CSI
Colorist

Windows 10
HP Z8
RTX2080ti (x2)
Intel Xeon Gold 18 Core
128 RAM
NVME M.2 Samsung 970 2TB (x4)
Resolve 17.4
Offline
User avatar

rick.lang

  • Posts: 17156
  • Joined: Wed Aug 22, 2012 5:41 pm
  • Location: Victoria BC Canada

CFast cards for 4.6 URSA/MINI

PostTue Mar 22, 2016 7:59 pm

Now I am confused. Perhaps the person posted the same information in more than one place as you are quoting a problem with 3400x cards while this thread mentions 3600x cards failing in dual recording:
warning: using 2 cards with Ursa Mini 4k
viewtopic.php?t=45896


Sent from my iPad using Tapatalk
Rick Lang
Offline

Ashok.Vardhan

  • Posts: 76
  • Joined: Wed Aug 14, 2013 4:49 am
  • Location: Los Angeles, CA

256GB Lexar 3400x CFast 2.0

PostTue Mar 22, 2016 8:08 pm

I have ordered four 256GB Lexar 3400x cards. They will arrive probably end of this week or early next week. Anyone based in Los Angeles that has a URSA Mini 4.6K and would like to test them out before investing can PM me to meet-up. I am more than happy to lend them. You could post results for all to know. My URSA Mini is still on backorder status, so it will be a while before I will be able to test my cards personally.
Offline
User avatar

Scott Stacy

  • Posts: 957
  • Joined: Sun Apr 28, 2013 4:02 pm
  • Location: Kansas City

Re: CFast cards for 4.6 URSA/MINI

PostTue Mar 22, 2016 8:36 pm

rick.lang wrote:Now I am confused. Perhaps the person posted the same information in more than one place as you are quoting a problem with 3400x cards while this thread mentions 3600x cards failing in dual recording:
warning: using 2 cards with Ursa Mini 4k
viewtopic.php?t=45896


Sent from my iPad using Tapatalk


Hmmm ... I'm befuddled. The BMD post and the one under my post on BMCuser is worded similarly. Well ... Lexar has approved the 3600x card for the Ursa 4.6k. So, if they don't work, I suppose I can take it up with them. I bought these cards, months ago after the 3400x cards were discontinued. I am too cautious to order 3400x cards from China. I hope the BMD has been working with Lexar.
Scott Stacy, CSI
Colorist

Windows 10
HP Z8
RTX2080ti (x2)
Intel Xeon Gold 18 Core
128 RAM
NVME M.2 Samsung 970 2TB (x4)
Resolve 17.4
Offline
User avatar

rick.lang

  • Posts: 17156
  • Joined: Wed Aug 22, 2012 5:41 pm
  • Location: Victoria BC Canada

Re: CFast cards for 4.6 URSA/MINI

PostWed Mar 23, 2016 3:26 am

Jason Parker has said the behaviour happened to both 3400x and 3600x cards! BMD is looking into it since they've not seen this problem.


Sent from my iPad using Tapatalk
Rick Lang
Offline
User avatar

Subrata Senn

  • Posts: 581
  • Joined: Sun Mar 09, 2014 5:22 am
  • Location: Kolkata, India

Re: CFast cards for 4.6 URSA/MINI

PostWed Mar 23, 2016 3:41 am

I would wait to get the list of approved CFast cards for 4.6K Ursa/Mini before ordering for the camera. I believe the list will be coming anytime now.
Independent filmmaker/producer
Owner of post production facility for cinema including grading and creation of DCPs.
Offline

paulvanmondfrans

  • Posts: 19
  • Joined: Tue Feb 02, 2016 9:18 am

Re: CFast cards for 4.6 URSA/MINI

PostThu Mar 24, 2016 11:36 am

I really hope the Transcend CFX650 will work on the 4.6K. They are a bargain here in the Netherlands.
Anyone with a mini46 tested these yet?
Offline

Jack Liu

  • Posts: 31
  • Joined: Tue Sep 15, 2015 9:26 pm

Re: CFast cards for 4.6 URSA/MINI

PostSat Mar 26, 2016 11:09 pm

paulvanmondfrans wrote:I really hope the Transcend CFX650 will work on the 4.6K. They are a bargain here in the Netherlands.
Anyone with a mini46 tested these yet?


Had a chance to test the 4.6k with the two cfast cards I have. One CFX650 and a Lexar 3400x. The transcend works flawlessly in 60fps uncompressed raw. The lexar started dropping frames left and right after several seconds in this mode. Not sure if the lexar I got from ebay is defective or if it simply can't keep up.
Offline

jasonparker

  • Posts: 51
  • Joined: Mon Feb 01, 2016 5:39 am

Re: CFast cards for 4.6 URSA/MINI

PostSun Mar 27, 2016 6:53 am

Yeah the 3400x can't handle the data rate required for 60fps uncompressed raw. 3:1 and 4:1 work fine with these cards though. at $75 for the Lexar 3400x vs $300 for faster cards, it's still worth it.
Last edited by jasonparker on Sun Mar 27, 2016 3:33 pm, edited 1 time in total.
Offline
User avatar

Nick Gombinsky

  • Posts: 255
  • Joined: Fri Jul 19, 2013 5:30 pm
  • Location: Berlin, Germany

Re: CFast cards for 4.6 URSA/MINI

PostSun Mar 27, 2016 8:09 am

jasonparker wrote:
The lexar started dropping frames left and right after several seconds in this mode. Not sure if the lexar I got from ebay is defective or if it simply can't keep up.[/quote]

Yeah the 3400x can't handle the data rate required for 60fps uncompressed raw. 3:1 and 4:1 work fine with these cards though. at $75 for the Lexar 3400x vs $300 for faster cards, it's still worth it. [/quote]


How about 120fps HD? I have some x3400 that I bought specifically for the UM46K...
Offline

jasonparker

  • Posts: 51
  • Joined: Mon Feb 01, 2016 5:39 am

Re: CFast cards for 4.6 URSA/MINI

PostSun Mar 27, 2016 3:32 pm

120fps works totally fine too:



Shot that yesterday.
Offline
User avatar

Nick Gombinsky

  • Posts: 255
  • Joined: Fri Jul 19, 2013 5:30 pm
  • Location: Berlin, Germany

Re: CFast cards for 4.6 URSA/MINI

PostSun Mar 27, 2016 4:28 pm

That looks great Jason!
Do you see a big difference in IQ between shooting full sensor and windowed mode?

Tu sum up, Lexar x3400 can go up to RAW 3:1 60fps without problems, its just uncompressed raw the problem? If thats so I'll be keeping mine, I'll probably be shooting 3:1 when needed.
Offline

jasonparker

  • Posts: 51
  • Joined: Mon Feb 01, 2016 5:39 am

Re: CFast cards for 4.6 URSA/MINI

PostSun Mar 27, 2016 4:55 pm

Nick Gombinsky wrote:That looks great Jason!
Do you see a big difference in IQ between shooting full sensor and windowed mode?

Tu sum up, Lexar x3400 can go up to RAW 3:1 60fps without problems, its just uncompressed raw the problem? If thats so I'll be keeping mine, I'll probably be shooting 3:1 when needed.


There is not a big difference in quality, but since it's a cropped window of the full sensor, it's basically like zooming in 2x on a full 4.6k frame so you do see a little loss in quality.

Uncompressed RAW could be doable as well with 2 3400x cards in dual card mode, but I haven't tried that or tested the workflow yet.

I shoot 3:1 all the time. The smaller file size is waaaay more easy to deal with in resolve, and the lossy quality is not noticeable to my eye.
Offline
User avatar

rick.lang

  • Posts: 17156
  • Joined: Wed Aug 22, 2012 5:41 pm
  • Location: Victoria BC Canada

Re: CFast cards for 4.6 URSA/MINI

PostSun Mar 27, 2016 8:01 pm

Jason, watching the birds giving themselves a shower was pretty entertaining. Nice video.


Sent from my iPad using Tapatalk
Rick Lang
Offline
User avatar

Benton Collins

  • Posts: 639
  • Joined: Wed Oct 24, 2012 3:03 am
  • Location: Brooklyn, New York

Re: CFast cards for 4.6 URSA/MINI

PostMon Mar 28, 2016 2:59 am

Jack Liu wrote:
paulvanmondfrans wrote:I really hope the Transcend CFX650 will work on the 4.6K. They are a bargain here in the Netherlands.
Anyone with a mini46 tested these yet?


Had a chance to test the 4.6k with the two cfast cards I have. One CFX650 and a Lexar 3400x. The transcend works flawlessly in 60fps uncompressed raw. The lexar started dropping frames left and right after several seconds in this mode. Not sure if the lexar I got from ebay is defective or if it simply can't keep up.


If the Transcend CFX650 works as well as Jack says, is there any reason not to get it over the Lexar 3600X?
Are they known to be less reliable? They certainly are cheaper!
Offline
User avatar

Benton Collins

  • Posts: 639
  • Joined: Wed Oct 24, 2012 3:03 am
  • Location: Brooklyn, New York

Re: CFast cards for 4.6 URSA/MINI

PostMon Mar 28, 2016 5:33 pm

Matt White wrote:I did some tests.

Lexar 3600x 128gb cards formatted HFS+

Dual cards:

RAW, 4.6k, 60fps = dropped frames. Kept recording on to the second card, and the first card was not corrupted.

RAW 3:1, 4.6k, 60fps = no dropped frames. Kept recording on to the second card, and the first card was not corrupted.

Single card:

RAW, 4.6k, 60fps = dropped frames

RAW 3:1, 4.6k, 60fps = no dropped frames.

3840x2160 ProRes444XQ does not provide option for 40fps, only 30fps and lower

2K raw (windowed): I set the sensor rate to 120fps and there were no dropped frames.

I hope that helps.

:)

Since Matt White posted his test of the Lexar 3600X dropping frames in the 60fps uncompressed RAW mode (originally posted in the list of approved CFast card thread) And Jack Liu reports flawless performance with the Transcend CFX650 in that same mode, It seems like a no brainer to go for the Transcend CFX650 cards, especially when you can get them for $518.22 on Amazon. I was initially drawn to the Lexar simply because of brand recognition and a better perceived reliability factor (which may or may not be true). But if the Transcend performs better, that goes a long way toward actually being the better choice for the 4.6k regardless of brand name. I have one arriving soon and I'll check it out myself and report back here.
Offline
User avatar

Matt White

  • Posts: 306
  • Joined: Wed Apr 24, 2013 12:18 am
  • Location: NYC

Re: CFast cards for 4.6 URSA/MINI

PostMon Mar 28, 2016 6:03 pm

With Uncompressed Raw the camera is outputting 513mb/s.

Lexar 3600x = Max. Write Speed: 445 MB/s

Transcend CFX650 128GB = 370 MB/s Write Speed
Offline
User avatar

Benton Collins

  • Posts: 639
  • Joined: Wed Oct 24, 2012 3:03 am
  • Location: Brooklyn, New York

Re: CFast cards for 4.6 URSA/MINI

PostTue Mar 29, 2016 2:28 am

Matt White wrote:With Uncompressed Raw the camera is outputting 513mb/s.

Lexar 3600x = Max. Write Speed: 445 MB/s

Transcend CFX650 128GB = 370 MB/s Write Speed


Numbers are fine, but isn't it the observed performance that counts? If we go by the numbers, the Lexar 3600X should perform better than the Transcend, but it doesn't, at least reported so far by Jack Liu. He says that a single Transcend card performed flawlessly at 60fps 4.6k uncompressed RAW. I have one coming soon, so I hope I can duplicate that finding.
Offline

jasonparker

  • Posts: 51
  • Joined: Mon Feb 01, 2016 5:39 am

Re: CFast cards for 4.6 URSA/MINI

PostTue Mar 29, 2016 4:36 am

I just tested 2 lexar 3400x (discontinued, $75 dollar eBay cards from China) in dual card mode and they worked just fine at 60fps uncompressed raw. But it did fill up both cards with only 7 minutes of record time.

No problems with either card becoming corrupt.
Offline

jasonparker

  • Posts: 51
  • Joined: Mon Feb 01, 2016 5:39 am

Re: CFast cards for 4.6 URSA/MINI

PostTue Mar 29, 2016 4:39 am

Matt White wrote:With Uncompressed Raw the camera is outputting 513mb/s.

Lexar 3600x = Max. Write Speed: 445 MB/s

Transcend CFX650 128GB = 370 MB/s Write Speed



so how is it possible that the Transcend could keep up and record the RAW uncompressed data rate flawlessly when it's rated even slower than the lexar 3600x?
Offline
User avatar

Hussain Abdullah

  • Posts: 142
  • Joined: Fri Feb 05, 2016 5:11 pm
  • Location: Cologne, Germany

Re: CFast cards for 4.6 URSA/MINI

PostTue Mar 29, 2016 10:05 am

jasonparker wrote:I just tested 2 lexar 3400x (discontinued, $75 dollar eBay cards from China) in dual card mode and they worked just fine at 60fps uncompressed raw. But it did fill up both cards with only 7 minutes of record time.

No problems with either card becoming corrupt.

$75, wow. Are you talking about 256GB each?
Filmmaker Reel: https://vimeo.com/321625960
IMDb: www.imdb.com/name/nm3262249
Website: www.hussainabdullah.com
Offline

riccardocovino

  • Posts: 52
  • Joined: Mon May 26, 2014 5:23 pm

Re: CFast cards for 4.6 URSA/MINI

PostTue Mar 29, 2016 10:54 am

75$ and 7 minutes.. probably he's talkin' about the 64GB Lexar 3400
Offline
User avatar

Matt White

  • Posts: 306
  • Joined: Wed Apr 24, 2013 12:18 am
  • Location: NYC

Re: CFast cards for 4.6 URSA/MINI

PostTue Mar 29, 2016 1:06 pm

Benton Collins wrote:
Matt White wrote:With Uncompressed Raw the camera is outputting 513mb/s.

Lexar 3600x = Max. Write Speed: 445 MB/s

Transcend CFX650 128GB = 370 MB/s Write Speed


Numbers are fine, but isn't it the observed performance that counts?


I got this information from my vendor, who said that at this time there is no CFAST card fast enough to record the full capacity of the camera (4.6k RAW 60fps), so the only way to use that setting is with an external recorder. via SDI.

Personally, I have no need for uncompressed raw right now, so I am not concerned.
Offline

MontgomerySutton

  • Posts: 45
  • Joined: Tue Aug 27, 2013 5:28 pm

Re: CFast cards for 4.6 URSA/MINI

PostTue Mar 29, 2016 1:33 pm

riccardocovino wrote:75$ and 7 minutes.. probably he's talkin' about the 64GB Lexar 3400


I think he's talking about the 128Gb Lexar 3400x - they were going for $75 for a while with "Make Offer" but now they've gone back up, I can't get anyone to agree to less than $118 now. At that point I'd rather spend a couple pennies more per Gb and get the 256Gb 3400x at $250.
Montgomery Sutton
Producer, Cinematographer
montgomery@lupoblu.com

lupo blu, LLC (www.lupoblu.com)
Salt Pillar Productions (www.saltpillarproductions.com)

URSA Mini 4.6K | Red Scarlet Dragon | Canon C100 mkII | BMPCC (x2)
Offline
User avatar

Benton Collins

  • Posts: 639
  • Joined: Wed Oct 24, 2012 3:03 am
  • Location: Brooklyn, New York

Re: CFast cards for 4.6 URSA/MINI

PostTue Mar 29, 2016 4:24 pm

Jack Liu wrote:
paulvanmondfrans wrote:I really hope the Transcend CFX650 will work on the 4.6K. They are a bargain here in the Netherlands.
Anyone with a mini46 tested these yet?


Had a chance to test the 4.6k with the two cfast cards I have. One CFX650 and a Lexar 3400x. The transcend works flawlessly in 60fps uncompressed raw. The lexar started dropping frames left and right after several seconds in this mode. Not sure if the lexar I got from ebay is defective or if it simply can't keep up.


Jack Liu, Thanks for your report. How long were you able to record 4.6k 60fps uncompressed RAW using a single Transcend CFX650 card?
Offline

jasonparker

  • Posts: 51
  • Joined: Mon Feb 01, 2016 5:39 am

Re: CFast cards for 4.6 URSA/MINI

PostTue Mar 29, 2016 4:54 pm

Hussain Abdullah wrote:
jasonparker wrote:I just tested 2 lexar 3400x (discontinued, $75 dollar eBay cards from China) in dual card mode and they worked just fine at 60fps uncompressed raw. But it did fill up both cards with only 7 minutes of record time.

No problems with either card becoming corrupt.

$75, wow. Are you talking about 256GB each?



sorry, no these were 128gb cards
Offline
User avatar

rick.lang

  • Posts: 17156
  • Joined: Wed Aug 22, 2012 5:41 pm
  • Location: Victoria BC Canada

CFast cards for 4.6 URSA/MINI

PostTue Mar 29, 2016 5:22 pm

Matt White wrote:I got this information from my vendor, who said that at this time there is no CFAST card fast enough to record the full capacity of the camera (4.6k RAW 60fps), so the only way to use that setting is with an external recorder. via SDI.

Personally, I have no need for uncompressed raw right now, so I am not concerned.


Matt, true 60 fps uncompressed raw exceeds the recording capability of an existing CFast 2 card in the URSA/Mini. But remember two things:

First, 'uncompressed' is actually lossless compressed raw much like you can zip a data file and then unzip it without any loss of data. That lossless compression fa or varies with your scene but is likely somewhere in the range of 1.2x to 1.5x for video. Generally I assume a factor of 1.3, but to play it safe, let's assume it's 1.25x for our busy video.

Second, for high frame rates, the CinemaDNG raw files are supposed to use the camera's dual record option, so all odd DNG frames are on one card and the even DNG frames on the other card.

You need to use both of those things to allow you to record raw 60 fps open gate on the 4.6K sensor. The camera always records uncompressed raw as lossless compressed raw, but you need to select the dual record option with two cards in the slots.

4608 X 2592 = 11,943,936 photosites/frame
X 12 bit raw = 143,327,232 bits/frame
X 60 fps = 8,599,633,920 bits/second
/ 8 bits per byte = 1,074,954,240 bytes/second
/ 1.25 lossless compression = 859,963,392 bytes/second
/ 2 cards = 429,981,696 bytes/second/card
+ audio 24bit 48KHz 2 channel recorded on each card
(2,304,000 bits or 288,000 bytes per second).

So you need two cards each of which must record with a sustained data rate of 430,269,696 bytes per second. The Lexar 3600x cards are rated at 445 MB/s. So they should work depending upon the amount of lossless compression.

The Transcend 3400x CFX650 cards are rated at 370 MB/s. They should fail except on simpler scenes that permit higher values of lossless compression.

I think the vendors are following the traditional 'computer' definition of a megabyte and kilobyte:
1 MB = 1024 KB and 1 KB = 1024 bytes, therefore
1 MB = 1,048,576 bytes.

If I'm correct in that assumption:
the Transcend's 370 MB/s is actually 387,973,120 bytes per second. Subtracting 288,000 bytes per second for audio, leaves 387,685,120 for video. With a perfectly reasonable lossless compression factor of 1.4x, this can be done. But in a very busy scene the Transcend may have dropped frames.
Rick Lang
Offline
User avatar

Matt White

  • Posts: 306
  • Joined: Wed Apr 24, 2013 12:18 am
  • Location: NYC

Re: CFast cards for 4.6 URSA/MINI

PostTue Mar 29, 2016 6:18 pm

I did more testing with these Lexar cards.

I am now consistently getting good results using dual card mode, recording 4.6k RAW 60fps. I have not been able to repeat the dropped frames I initially observed. I do not know why. Nevertheless, it appears that the 3600x cards DO record uncompressed RAW in dual card mode.
Offline
User avatar

Benton Collins

  • Posts: 639
  • Joined: Wed Oct 24, 2012 3:03 am
  • Location: Brooklyn, New York

Re: CFast cards for 4.6 URSA/MINI

PostWed Mar 30, 2016 3:35 am

rick.lang wrote:The Transcend 3400x CFX650 cards are rated at 370 MB/s. They should fail except on simpler scenes that permit higher values of lossless compression.

If I'm correct in that assumption:
the Transcend's 370 MB/s is actually 387,973,120 bytes per second. Subtracting 288,000 bytes per second for audio, leaves 387,685,120 for video. With a perfectly reasonable lossless compression factor of 1.4x, this can be done. But in a very busy scene the Transcend may have dropped frames.


Hi Rick Lang, Thanks for your through breakdown. I have received one Transcend CFX650 card, but have not opened the package yet, so it's still returnable. I went for it based solely on Jack Liu's report of flawless performance with no dropped in 4.6k Uncompressed RAW at 60fps. Is it possible he got these results with a single card? Maybe he was recording a blank wall? I won't be too upset if I don't get the same results he did on a single card, but, do you think two Transcend CFX650s will work in dual card mode with 4.6k Uncompressed RAW at 60fps?
Thanks,
Benton
Offline
User avatar

rick.lang

  • Posts: 17156
  • Joined: Wed Aug 22, 2012 5:41 pm
  • Location: Victoria BC Canada

Re: CFast cards for 4.6 URSA/MINI

PostWed Mar 30, 2016 3:54 am

Benton Collins wrote:
rick.lang wrote:The Transcend 3400x CFX650 cards are rated at 370 MB/s. They should fail except on simpler scenes that permit higher values of lossless compression.

If I'm correct in that assumption:
the Transcend's 370 MB/s is actually 387,973,120 bytes per second. Subtracting 288,000 bytes per second for audio, leaves 387,685,120 for video. With a perfectly reasonable lossless compression factor of 1.4x, this can be done. But in a very busy scene the Transcend may have dropped frames.


Hi Rick Lang, Thanks for your through breakdown. I have received one Transcend CFX650 card, but have not opened the package yet, so it's still returnable. I went for it based solely on Jack Liu's report of flawless performance with no dropped in 4.6k Uncompressed RAW at 60fps. Is it possible he got these results with a single card? Maybe he was recording a blank wall? I won't be too upset if I don't get the same results he did on a single card, but, do you think two Transcend CFX650s will work in dual card mode with 4.6k Uncompressed RAW at 60fps?
Thanks,
Benton


Hard to comment on Jack's post, but I am skeptical that the scene involved significant motion and complex detail. Two Transcend's may well work when the raw lossless compression factor is approaching 1.4x and it may also be that Transcend has been conservative in their performance numbers which is a good thing.

I don't think it would hurt to have a pair of Transcend's cards and a pair of Lexar's cards. Then with testing you can learn which is better. I think it was CaptainHook who has posted that the Transcend cards actually did better recording ProRes and the Lexar cards did better recording raw. So it may make sense to have both brands. I'd follow the Captain's guidance but best to test yourself.
Rick Lang
Offline
User avatar

Benton Collins

  • Posts: 639
  • Joined: Wed Oct 24, 2012 3:03 am
  • Location: Brooklyn, New York

Re: CFast cards for 4.6 URSA/MINI

PostWed Mar 30, 2016 4:12 am

rick.lang wrote:
Benton Collins wrote:
rick.lang wrote:The Transcend 3400x CFX650 cards are rated at 370 MB/s. They should fail except on simpler scenes that permit higher values of lossless compression.

If I'm correct in that assumption:
the Transcend's 370 MB/s is actually 387,973,120 bytes per second. Subtracting 288,000 bytes per second for audio, leaves 387,685,120 for video. With a perfectly reasonable lossless compression factor of 1.4x, this can be done. But in a very busy scene the Transcend may have dropped frames.


Hi Rick Lang, Thanks for your through breakdown. I have received one Transcend CFX650 card, but have not opened the package yet, so it's still returnable. I went for it based solely on Jack Liu's report of flawless performance with no dropped in 4.6k Uncompressed RAW at 60fps. Is it possible he got these results with a single card? Maybe he was recording a blank wall? I won't be too upset if I don't get the same results he did on a single card, but, do you think two Transcend CFX650s will work in dual card mode with 4.6k Uncompressed RAW at 60fps?
Thanks,
Benton


Hard to comment on Jack's post, but I am skeptical that the scene involved significant motion and complex detail. Two Transcend's may well work when the raw lossless compression factor is approaching 1.4x and it may also be that Transcend has been conservative in their performance numbers which is a good thing.

I don't think it would hurt to have a pair of Transcend's cards and a pair of Lexar's cards. Then with testing you can learn which is better. I think it was CaptainHook who has posted that the Transcend cards actually did better recording ProRes and the Lexar cards did better recording raw. So it may make sense to have both brands. I'd follow the Captain's guidance but best to test yourself.


Thanks Rick, I was thinking the same thing that having a pair of each type of card wouldn't hurt. Except in the wallet of course! But such is the price for this type of performance! I have a project coming up where I would feel less than prepared with less than four 256gb cards anyway. So I guess it's a bullet to be bitten!
Offline
User avatar

rick.lang

  • Posts: 17156
  • Joined: Wed Aug 22, 2012 5:41 pm
  • Location: Victoria BC Canada

Re: CFast cards for 4.6 URSA/MINI

PostWed Mar 30, 2016 4:14 am

Will it be a mix of raw and ProRes?


Sent from my iPad using Tapatalk
Rick Lang
Offline
User avatar

Benton Collins

  • Posts: 639
  • Joined: Wed Oct 24, 2012 3:03 am
  • Location: Brooklyn, New York

Re: CFast cards for 4.6 URSA/MINI

PostWed Mar 30, 2016 5:04 am

rick.lang wrote:Will it be a mix of raw and ProRes?


Sent from my iPad using Tapatalk

Probably not. I'll stick with either RAW or 3:1 RAW throughout. The majority will be standard 24fps. Only occasionally 60fps. which is where I will use the dual Lexar cards. Do you think the Transcend's will work ok in standard RAW or 3:1?
Offline
User avatar

Jamie LeJeune

  • Posts: 2012
  • Joined: Tue Feb 26, 2013 4:33 am
  • Location: San Francisco

Re: CFast cards for 4.6 URSA/MINI

PostWed Mar 30, 2016 5:12 am

rick.lang wrote:I don't think it would hurt to have a pair of Transcend's cards and a pair of Lexar's cards. Then with testing you can learn which is better.


You're right Rick and that is solid advice, but damn that's a shame it's what we're all going to have to do. The switch to cFast supposed to save us from the dropped frame uncertainties of SSD drives that we had to deal with on the BMCC and the production camera, right?
Honestly, BMD really should be providing us with unequivocal answers about which cards are best for the 4.6K. They should have done enough testing before the camera shipped. They certainly had plenty of time for it during the long months of beta testing.
www.cinedocs.com
http://www.imdb.com/name/nm4601572/
Offline
User avatar

rick.lang

  • Posts: 17156
  • Joined: Wed Aug 22, 2012 5:41 pm
  • Location: Victoria BC Canada

Re: CFast cards for 4.6 URSA/MINI

PostWed Mar 30, 2016 5:18 am

Benton, for uncompressed raw (actually lossless compressed) at 60 fps they might handle simpler scenes but I think they would not be trustworthy. On the other hand, they should be good for raw 3:1 60 fps which requires about a third of the data rate of truly uncompressed raw. You could experiment with a single card but more complex scenes might be problematic and dual recording would be a breeze at 60 fps.


Sent from my iPad using Tapatalk
Rick Lang
Offline

Brandon Richardson

  • Posts: 107
  • Joined: Thu Oct 25, 2012 9:35 pm
  • Location: Washington D.C

Re: CFast cards for 4.6 URSA/MINI

PostWed Mar 30, 2016 6:25 am

Everybody should be shooting be 4:1 Raw there cant really be any discernible difference to the eye. And the audience is definitely not going to know if you shot Raw or 4:1 Raw. If it doesn't need a quick Pro Res turn around 4:1 Raw all day.
Offline

Michael Odhiambo

  • Posts: 157
  • Joined: Sun Feb 24, 2013 8:27 pm

Re: CFast cards for 4.6 URSA/MINI

PostTue Apr 05, 2016 4:39 am

jasonparker wrote:120fps works totally fine too:



Shot that yesterday.


You shot on the 3400 lexar? About to take the plunge and order the UM46. Saw the threads about 70 bucks for 128 GB lexar 3400x on ebay. Want to order 2 to start with. I also have the shogun, and i had planned to record everything onto it (except 2160p60). So I want to know if two lexar 3400's and the shogun recording most of my stuff will work until CFast card prices come down for us mere mortal.

I shoot music vids, docus and commercials. So mostly 25fps (Pal world) and some 60 for the heck of it. 120 is too slow except for Docu work.
Offline

Ryan Hamblin

  • Posts: 218
  • Joined: Sat Apr 18, 2015 10:04 pm
  • Location: LA/Nashville, TN

Re: CFast cards for 4.6 URSA/MINI

PostTue Apr 05, 2016 11:14 am

I have the 3400x and have had no problem with raw 4:1 60fps


Sent from my iPhone using Tapatalk

www.ryanhamblin.com
www.brainstem.tv
www.brainstem.tv
www.ryanhamblin.com
Offline
User avatar

Jamie LeJeune

  • Posts: 2012
  • Joined: Tue Feb 26, 2013 4:33 am
  • Location: San Francisco

Re: CFast cards for 4.6 URSA/MINI

PostTue Apr 05, 2016 5:57 pm

I took the risk and ordered some last week. It is great to hear that they are working for you. Thank you Ryan!
www.cinedocs.com
http://www.imdb.com/name/nm4601572/
Offline

Michael Odhiambo

  • Posts: 157
  • Joined: Sun Feb 24, 2013 8:27 pm

Re: CFast cards for 4.6 URSA/MINI

PostTue Apr 05, 2016 9:49 pm

jasonparker wrote:I just tested 2 lexar 3400x (discontinued, $75 dollar eBay cards from China) in dual card mode and they worked just fine at 60fps uncompressed raw. But it did fill up both cards with only 7 minutes of record time.

No problems with either card becoming corrupt.

The 64GB ones?
Offline

jasonparker

  • Posts: 51
  • Joined: Mon Feb 01, 2016 5:39 am

Re: CFast cards for 4.6 URSA/MINI

PostWed Apr 06, 2016 4:51 am

Michael Odhiambo wrote:
jasonparker wrote:I just tested 2 lexar 3400x (discontinued, $75 dollar eBay cards from China) in dual card mode and they worked just fine at 60fps uncompressed raw. But it did fill up both cards with only 7 minutes of record time.

No problems with either card becoming corrupt.

The 64GB ones?



no I have all 128gb ones (3400x)

still no problems with them at all
Offline

Ned Soltz

  • Posts: 139
  • Joined: Wed Aug 22, 2012 8:57 pm

Re: CFast cards for 4.6 URSA/MINI

PostWed Apr 06, 2016 9:06 pm

Shot yesterday on 2 Lexar 3600x 256gb cards. No problems with spanning cards in ProRes and no problems with any clips. Shot ProRes HQ and some shots in 3:1 RAW. Still need to test them in Uncompressed RAW.

Ned Soltz
Offline
User avatar

Dave Perry

  • Posts: 569
  • Joined: Wed Jul 10, 2013 3:42 am
  • Location: Los Angeles, CA

Re: CFast cards for 4.6 URSA/MINI

PostThu Apr 07, 2016 1:19 am

What are the beta testers using?
BMUM 4.6k PL, S1H
----------------------------------------------
Dave Perry Cinematographer LLC
Director of Photography • Camera Operator
2046 High Tower Dr. Unit 1
Hollywood USA 90068
daveperry.net
Offline
User avatar

Note Suwanchote

  • Posts: 336
  • Joined: Wed Nov 14, 2012 6:51 pm

Re: CFast cards for 4.6 URSA/MINI

PostThu Apr 07, 2016 8:25 am

Lexar cfast x3400 128gb for me
lightformfilm.com
vimeo.com/Suwanchote
Offline
User avatar

Dave Perry

  • Posts: 569
  • Joined: Wed Jul 10, 2013 3:42 am
  • Location: Los Angeles, CA

Re: CFast cards for 4.6 URSA/MINI

PostThu Apr 07, 2016 5:51 pm

Message from Tony Rivera after asking Tech Support:

Hello Dave,

If there is a different list for the 4.6 models, I would expect it to appear around the time of NAB or shortly there after as we are in the final stages or preparation for the trade show.

Regards,

Tony Rivera
Blackmagic Design

Ticket History
Dave Perry (Client) Posted On: 07 April 2016 09:27 AM

Thanks Tony. I mainly wanted to confirm that the ones listed for the 4K Ursas worked for the 4.6 as well. There doesn’t seem to be a list for the 4.6k sensor.

Thanks.

dp



Tony Rivera (Staff) Posted On: 07 April 2016 09:06 AM

Hello Dave,

We'd suggest at this time sticking with the ones on our approved CFast list from the support page (https://www.blackmagicdesign.com/support/faq/59008). As far as other cards being added, I do know that we are working on approval of more but I do not have a time frame for when that list will be updated currently.

Regards,

Tony Rivera
Blackmagic Design

Dave Perry (Client) Posted On: 06 April 2016 06:24 PM

Product: Blackmagic URSA Mini 4.6K PL
First Name: Dave
Last Name: Perry
Company: Dave Perry Cinematographer LLC
Email: dave@daveperry.net
Phone Number: 5409152752
City: Roanoke
State: VA
Country: United States
Subject: Re: CFast cards for 4.6 URSA/MINI
Enquiry: What CFast cards should I use with the Blackmagic URSA Mini 4.6
Camera? When will approved cards be adde to the list?

Thanks.

dp
BMUM 4.6k PL, S1H
----------------------------------------------
Dave Perry Cinematographer LLC
Director of Photography • Camera Operator
2046 High Tower Dr. Unit 1
Hollywood USA 90068
daveperry.net
Offline
User avatar

Note Suwanchote

  • Posts: 336
  • Joined: Wed Nov 14, 2012 6:51 pm

Re: CFast cards for 4.6 URSA/MINI

PostThu Apr 07, 2016 5:54 pm

For me I've used the x3400 extensively. Very very extensively and through all the settings. Not one hiccup except 60p uncompressed. 60p 3:1 works. I think just that there's so many hesitations adds to
The current confusion. The caveat is that this could change of course but right now they are working brilliantly.
lightformfilm.com
vimeo.com/Suwanchote
Next

Return to Cinematography

Who is online

Users browsing this forum: Google [Bot] and 25 guests