Andrew Kolakowski wrote:I don't understand your connection description.
Are you sending UHD out BM card over HDMI?
yes both UHD and 4KDCI clips and timelines, always splitted when monitoring is set to 4K DCI or UHD. If i set to 1080p no problems
Andrew Kolakowski wrote:What format? Try 24p for test. 25p DCI may not work.
as timeline i've tried UHD 25 and 4K DCI 25 and 24p
as clip i've tried with r3d raw 50 conformed 25p, MXF 25p, dng 50p comforted to 25, 1080 50 to 25p (even when i select the clip the visualization is splitted, also when i monitoring in 4K DCI with 1080 footage is splitted... actually looks like a cable problem also because Monitor message said to check for it.
Andrew Kolakowski wrote:Go to LG settings and look for HDMI settings. If you see YUV or 422 try forcing this.
Also make sure BM is on dedicated TB2 port. Don't use any chaining.
LG does not have HDMI option to set, on BM card details the signal over HDMI is
"4K DCI 25p, 10-bit YUV 4:2:2"I've check the config of monitor, BMcard, and CPU connection with a friend of mine who has the same monitor and card connected to an iMac with 10.11 OS ad it works at 4KDCI 25p timeline scaling down 4.6 dng ursa mini pro footage.
i've clean as much as possible the connection and make a try with CPU connected to BM card via TB and BM card to LG via HDMI and raid system to CPU via TB. still splitted.
DR18 (Appstore version) - Macbook Pro 16'' (2021) M1 Max 32 Gb IOS 12.6 - Ultrastudio 4K - Eizo CG223W - LG 31MU97 - Motu Ultralite MK4 2XYamaha HS5 + HS8S - Micropanel - Speed editor - Promise Pegasus R6