- Posts: 3
- Joined: Sat Feb 02, 2019 6:22 pm
- Real Name: Bogdan Apetri
Hello!
I set up my UltraStudio HD Mini correctly as far as I can tell.
Everything video-related is working perfectly.
However, I have two audio problems:
1. - the audio coming out of the UltraStudio HD Mini is incredibly loud, going through the embedded SDI to the Blackmagic SDI to HDMI Converter - from there with right and left channels out into the speaker. I've noticed other people had the same problem and pretty much everyone said the culbrit is balanced vs unbalanced somewhere down the line. I can tell you, I only have BALANCED connector and cables everywhere. I double-checked. The speakers are the M-Audio BX5 also with balanced inputs. However, the loudness of the audio coming out if it is incredible. Both in Resolve and Avid. Is this normal? The levels are really, really high. Even if I lower the gain in the Blackmagic Converter output settings by -12db, it's still very very loud. It doesn't seem normal. Any ideas?
2. - Right when I set up the UltraStudio HD Mini - in the beginning - I could see the audio meters/levels in the Teranex Smart Panel dancing up and down whenever I played a clip with audio through it. At some point, the audio meters got disabled. I can hear the audio (very loud, see above!) but absolutely no audio meters dancing anymore on the front panel of the UltraStudio. What could be the cause?
Thank you so much! I would appreciate any hlep.
I set up my UltraStudio HD Mini correctly as far as I can tell.
Everything video-related is working perfectly.
However, I have two audio problems:
1. - the audio coming out of the UltraStudio HD Mini is incredibly loud, going through the embedded SDI to the Blackmagic SDI to HDMI Converter - from there with right and left channels out into the speaker. I've noticed other people had the same problem and pretty much everyone said the culbrit is balanced vs unbalanced somewhere down the line. I can tell you, I only have BALANCED connector and cables everywhere. I double-checked. The speakers are the M-Audio BX5 also with balanced inputs. However, the loudness of the audio coming out if it is incredible. Both in Resolve and Avid. Is this normal? The levels are really, really high. Even if I lower the gain in the Blackmagic Converter output settings by -12db, it's still very very loud. It doesn't seem normal. Any ideas?
2. - Right when I set up the UltraStudio HD Mini - in the beginning - I could see the audio meters/levels in the Teranex Smart Panel dancing up and down whenever I played a clip with audio through it. At some point, the audio meters got disabled. I can hear the audio (very loud, see above!) but absolutely no audio meters dancing anymore on the front panel of the UltraStudio. What could be the cause?
Thank you so much! I would appreciate any hlep.