Daniel.
4K, HD is depending on the job, but the ATEM can convert so I could just run the PTZ on HD if I had to, the main output from the ATEM would be 4K anyways. (this is why I ask if I can have the arduino on one camera only, example on camera 1 and then have the arduino on ATEM SDI out 1 and then to the camera from the arduino)
If the arduino only works in HD, and if I must use the main pgm out to the joystick then it is a no go...
also I must use the PGM out to my joystick and from there split the signal going to the cam right?
I have to ask:
When you say "program output" is it only the PGM or all 8 outputs?
Sorry but not really clear for me :-/
I have my friend who build a lot of stuff using arduino, he can build me a controller no probs but I need to know I can get it to work as I wanted. We checked the code and there are absolute values so even position presets and macros can bu added using arduino he said, but whats the point if it must use the main PGM out, then I can not use 4K at all. Thats why I ask and ask and ask (and sometimes sounds stupid
)
_______________________
Hello Kim, thanks for taking part in the discussion.
Basically I just want a joystick to control pan/tilt as the trackball sucks, I don't want to buy visca controller to do this separately, I just want as simple as possible be able to use pan/tilt smoothly
1 x ATEM Constallation 2ME | 2 x Hyperdeck Mini HD | 1 x Multidock 10G | 1 x Video Hub 40 | 1 x Multiview 16 | 1 x Web Presenter HD | 3 x Ursa Broadcast