Do you still get Resolve for free with Fusion FX?

I thought we would get another licence of Resolve. I remember that you would get Davinci for free (I think, I may be mistaken) with Fusion FX. Is that still a thing?
Any advice of what would be the best, dongle or serial?

Best,
Andreas

Resolve works with the Fusion dongle.

[Dwaine Maggart]

Fusion 9 dongles work with Resolve Studio 15 and 16.

Fusion 16 works with a Resolve dongle or a Fusion 9 dongle.

No stand alone Fusion version currently works with Resolve activation codes.

At the moment, we are still selling Fusion 9 dongle packages.

Thanks Dwaine, always a pleasure.
Just to confirm:
I have a Resolve Dongle. Can I just use Fusion Studio then? I never tried.

Sounds like we should get the Fusion 9 dongle then, right? since it will give both Resolve Studio 16 and Fusion Studio 16.

Thanks
Andreas

I have the DR dongle, and am also able to run Fusion Studio.

That is a happy surprised. Just tried Fusion Studio. If I would have known I would have used it more in the past.
I just ordered another Davinci 16 Studio Dongle.
Plan to try to work cooperatively on a project over a Network. Will be interesting to see.

For the Davinci Network will it have acceptable performance if the shared database is on a spinning harddrive with raid. (Raid 6 12x16TB disks) or should I install a ssd disk?

Best wishes,
Andreas

I don't know whether a shared network drive will give acceptable performance, although I'd think a RAID would give you higher bandwidth.

As I understand it, each editing workstation would store its Optimized Media and Cache on its local hard drive, so I'd think each workstation should at least have an SSD for that, with DR configured to use it.

[Dwaine Maggart]

To be clear, you can use a Resolve dongle with Fusion 16.

But not with Fusion 9.

I don't know whether a shared network drive will give acceptable performance, although I'd think a RAID would give you higher bandwidth.

As I understand it, each editing workstation would store its Optimized Media and Cache on its local hard drive, so I'd think each workstation should at least have an SSD for that, with DR configured to use it.

Yea, I'm not sure how often it reads and writes from the database. The raid is plenty fast for large files at 2200MB/s (but capped by the 10GbE at about 1000MB/s). Of course search time is long since it is not an SSD.

The whole point is I want us to be able to work on the same project at the same time so the databas needs to be on the network for this to work. Any one tried successfully?
Andreas

I have no experience with shared databases on network servers. But I expect that the database accesses themselves are of low bandwidth and intermittent.

Where I think you may have a problem is if multiple machines hit a network server simultaneously with demands for high bandwidth video files.

Here's an experiment you can run to get a handle on that. Set up a project with the files on the network server under your local machine's database (map the network server as a networked hard drive). See if you get acceptable performance even without the use of optimized media. If you get acceptable performance, set up a second machine the same way. I suspect that if you have two machines trying to scrub through different high-bandwidth video files at the same time you'll get a noticeable drop in performance. If you only have one studio license, set up the second machine with the free version to do the experiment.

The raid is plenty fast for large files at 2200MB/s (but capped by the 10GbE at about 1000MB/s).

Hi.

It will be very easy to remove your Bottleneck. You can may be add an extra 10 Gb plugin network adapter to your video server. Or if you don't have a free slot, can you may be exchange your current single port network adapter with a 10 Gb Dual Port Adapter.

Personally can't I see any reason to connect a video server with Raid to the workstations via a router. If you give the network adapters a fixed IP, will you be able to connect one output from the video server direct to the workstation with just a ethernet cable.

And finally. Why use 10 Gb, Today 40 Gb only cost a little more.

Regards Carsten.

Hi Guys,

Is the Fusion Dongle (https://www.bhphotovideo.com/c/product/ ... o_for.html) the best approach to use DR Studio and also have the option to use the stand-alone version of Fusion?

Thank you!

Yes.