Jump to: Board index » General » Fusion

Fusion 16 W/ Deadline

Learn about 3D compositing, animation, broadcast design and VFX workflows.
  • Author
  • Message
Offline

DeadBent

  • Posts: 2
  • Joined: Wed Oct 30, 2019 4:08 am
  • Real Name: Krzysztof Pianko

Fusion 16 W/ Deadline

PostFri Dec 27, 2019 9:13 pm

Has anyone had success utilizing Deadline for redner management with Fusion 16? It seems to be quite a mess. Deadline doesnt officially support Fusion 16 but the guys at thinkbox scripted it in for me. Ultimately, after getting through a bunch of errors (on Fusion's side), Deadline wants (or works best with) a command line renderer it seems, which makes sense. Command line rendereing was removed from Fusion 16? Is that correct???

Has anyone had any luck with Fusion 16 and Deadline? Or am I trying to fit a square peg into a round hole?
Offline
User avatar

Andrew Hazelden

  • Posts: 275
  • Joined: Sat Dec 06, 2014 12:10 pm
  • Location: West Dover, Nova Scotia, Canada

Re: Fusion 16 W/ Deadline

PostSat Dec 28, 2019 10:56 am

DeadBent wrote:Command line rendereing was removed from Fusion 16? Is that correct???


Command-line rendering is available through the "Fusion Render Node" program that is included with the Fusion Studio download.

Fusion Render Node installer.png
Fusion Render Node installer.png (266.16 KiB) Viewed 397 times


If you installed the Fusion Render Node program on your system, you will find the executable located in one of the following locations:

Windows
C:\Program Files\Blackmagic Design\Fusion Render Node 16\FusionRenderNode.exe

Linux
/opt/BlackmagicDesign/FusionRenderNode16/FusionRenderNode

macOS
/Applications/Blackmagic Fusion 16 Render Node/Fusion Render Node.app/Contents/MacOS/Fusion Render Node


Note: If you have a Resolve Studio dongle, it does not currently support unlocking the licensing mechanism of Fusion Studio v16.x Render Node clients. An actual Fusion Studio dongle is needed for licensing (at the moment) if you want to use Fusion Render node clients on your local network subnet.

Fusion Render Node CLI Syntax
The Fusion Render Node program in Fusion v9-16.1.1 supports the following direct command-line parameters:

Code: Select all
Fusion Render Node [<filename.comp> | <filename.dfq>] [/quiet] [/render [/frames <frameset>] [/start <frame>] [/end <frame>] [/step <step>] [/quit]] [/listen] [/join <host>] [/log <filename>] [/cleanlog] [/verbose] [/quietlicense] [/version] [/pri high|above|normal|below|idle] [/args [...]]


Note: IIRC on macOS and Linux systems each of the CLI parameter flags are specified with dashes instead of slashes like the Windows client expects.


DeadBent wrote:Has anyone had any luck with Fusion 16 and Deadline? Or am I trying to fit a square peg into a round hole?


IMHO the Steakunderwater forum is likely a better venue for these types of detailed technical questions since that is where the comp/pipeline technical director type of Fusion users tend to hang out. ;)
MacBook Pro 15-inch Mid 2015|2.8 GHz 4 Core i7|16GB RAM|AMD R9 M370X 2GB|Mac 10.15.2|Fu Studio 9.02|KartaVR 5
11xSupermicro 2042G-6RF Render Nodes|4xAMD G34 6276 CPUs@16 Cores|AMD GPU|Ubuntu 14.04 LTS|Fu Render Node 9.02|KartaVR 5
Offline

Travis Schmiesing

  • Posts: 97
  • Joined: Wed Oct 14, 2015 4:01 am

Re: Fusion 16 W/ Deadline

PostFri Jan 03, 2020 12:10 am

I started down the path of Fusion/Deadline but decided to use the native network rendering manager instead. It was a lot easier and works well.

Return to Fusion

Who is online

Users browsing this forum: No registered users and 13 guests