ATEM Mini Keyer

Questions about ATEM Switchers, Camera Converter and everything live!
  • Author
  • Message
Offline

Steved69

  • Posts: 2
  • Joined: Tue Dec 31, 2019 4:00 pm
  • Real Name: Steve Dillingham

ATEM Mini Keyer

PostTue Dec 31, 2019 4:05 pm

I'm using an ATEM Mini with two camera inputs and an upstream keyer. Every time I change inputs, the upstream keyer turns off. Is there something that I have setup incorrectly? I have my fill source as input 4 and two cameras as input 1 and 2. Thank you!
Offline

Raphaël Jacquot

  • Posts: 391
  • Joined: Wed Aug 29, 2012 4:15 pm

Re: ATEM Mini Keyer

PostFri Jan 10, 2020 9:31 am

this appears to be by design if you use the buttons on the atem mini.
if you need to do more complicated things, you'll have to use the control software
Offline
User avatar

Xtreemtec

  • Posts: 4471
  • Joined: Wed Jan 02, 2013 11:48 am
  • Location: The Netherlands

Re: ATEM Mini Keyer

PostFri Jan 10, 2020 10:30 am

Upstream keyer Next Transistion Key in turned on. So when you cut or fade to the next source. In the transition it also Turns on or off the Keyer.

In the software you can see this. The Key is ON AIR. ( Red button) And KEY1 yellow button underneath is active too.

Turn off the Yellow button and your problem is gone. ;)
Daniel Wittenaar .:: Xtreemtec Media Productions ::. -= www.xtreemtec.nl =-
4K OBV Trailer, ATEM TVS HD, 4M/E Broadcast Studio 4K, Constelation 8K, Hyperdeck Studio 12G, Ursa Broadcast 4K, 4K fiber converters with Sony Control
Offline

Gary Adams

Blackmagic Design

  • Posts: 969
  • Joined: Sat Aug 25, 2012 6:14 am

Re: ATEM Mini Keyer

PostFri Jan 10, 2020 4:33 pm

Hello Steve. In the ATEM Setup Utility you can change the behavior of this for both the Keyer and the DVE controls. I hope this helps.

Regards, Gary
Gary Adams
Blackmagic Design

Return to Live Production

Who is online

Users browsing this forum: Google [Bot], Joshua_G and 12 guests