- Posts: 24
- Joined: Sun Mar 15, 2020 5:40 am
- Real Name: MengYuGuo
I received ATEM Mini Pro today, which is great!
1. The backlight of the button is too bright. If it is in a very dark operation room, it will be very dazzling.
2. It's even better if Type-C can choose to output a multi-screen preview, I don't know if it can be achieved through software upgrade
3. The function of PiP is not very easy to use (maybe the operating logic is not yet understood)
4. The function of Key is not very easy to use (maybe the operating logic has not been understood)
5. I do n’t know if the 1, 2, 3, 4 buttons can show green, if you can choose P / V mode, switch through Cut / Auto, it will be better at some times
-------------------
Found the setting, supported. However, "Cut" may need to be further "debounced" processing, sometimes press 1 will become 2
------------------
Press hard to avoid
6. Whether the "BLACK" button can be defined as media or set in other colors
7. Whether the preview position of multiple windows can be adjusted or dragged
-----------------
The manual says that it supports multiple layouts, each window can be defined, but my version is fixed (V8.2.1)
8.It is hoped that the panel on the right side of the ATEM software control finally supports touch scrolling, otherwise it is inconvenient to use thin side scrollbars on the touch pad
9.When the number of channels is the same, it is not necessary to turn off the backlight of "cut" and "auto". Especially because the backlight is particularly bright, it will cause eye discomfort when it is on or off
10.If type-C to HDMI output is supported, which solves the output problem of PGM HDMI!(USE Type-C to HDMI adapter)
11.I found that without headphones is also an imperfect place, especially when all the live broadcasts are done in one machine
1. The backlight of the button is too bright. If it is in a very dark operation room, it will be very dazzling.
2. It's even better if Type-C can choose to output a multi-screen preview, I don't know if it can be achieved through software upgrade
3. The function of PiP is not very easy to use (maybe the operating logic is not yet understood)
4. The function of Key is not very easy to use (maybe the operating logic has not been understood)
5. I do n’t know if the 1, 2, 3, 4 buttons can show green, if you can choose P / V mode, switch through Cut / Auto, it will be better at some times
-------------------
Found the setting, supported. However, "Cut" may need to be further "debounced" processing, sometimes press 1 will become 2
------------------
Press hard to avoid
6. Whether the "BLACK" button can be defined as media or set in other colors
7. Whether the preview position of multiple windows can be adjusted or dragged
-----------------
The manual says that it supports multiple layouts, each window can be defined, but my version is fixed (V8.2.1)
8.It is hoped that the panel on the right side of the ATEM software control finally supports touch scrolling, otherwise it is inconvenient to use thin side scrollbars on the touch pad
9.When the number of channels is the same, it is not necessary to turn off the backlight of "cut" and "auto". Especially because the backlight is particularly bright, it will cause eye discomfort when it is on or off
10.If type-C to HDMI output is supported, which solves the output problem of PGM HDMI!(USE Type-C to HDMI adapter)
11.I found that without headphones is also an imperfect place, especially when all the live broadcasts are done in one machine
- Attachments
-
- The backlight of the button is too bright
- 微信图片_20200509210742.jpg (104.74 KiB) Viewed 2639 times
Last edited by DamonMeng on Sat May 23, 2020 12:22 pm, edited 4 times in total.