Arduino Shield Thread

Questions about ATEM Switchers, Camera Converter and everything live!
  • Author
  • Message
Offline

davidH

  • Posts: 1
  • Joined: Thu Apr 11, 2019 12:00 pm
  • Real Name: David Hernández Lucas

Re: Arduino Shield Thread

PostThu Apr 11, 2019 12:09 pm

Anyone nows how to make it work with the Arduino Leonardo?
I have it working with the uno buy I can't make it work with the Leonardo. I connected GND, sda and scl from Leonardo pins that are different from uno.
Thank you.
Offline
User avatar

Xtreemtec

  • Posts: 4481
  • Joined: Wed Jan 02, 2013 11:48 am
  • Location: The Netherlands

Re: Arduino Shield Thread

PostThu Apr 11, 2019 5:25 pm

Should not be a problem.. The i2c connector on the leonardo is also near the reset button. As well as on the SDI board.

bmdSdiShieldPinout.png
bmdSdiShieldPinout.png (21.69 KiB) Viewed 519 times
Daniel Wittenaar .:: Xtreemtec Media Productions ::. -= www.xtreemtec.nl =-
4K OBV Trailer, ATEM TVS HD, 4M/E Broadcast Studio 4K, Constelation 8K, Hyperdeck Studio 12G, Ursa Broadcast 4K, 4K fiber converters with Sony Control
Offline

Keksstar

  • Posts: 2
  • Joined: Sun Feb 02, 2020 4:38 pm
  • Real Name: Andreas Meyer

Re: Arduino Shield Thread

PostSun Feb 02, 2020 4:40 pm

Does anyone have an example code for the getcameratally command?
Offline

Keksstar

  • Posts: 2
  • Joined: Sun Feb 02, 2020 4:38 pm
  • Real Name: Andreas Meyer

Re: Arduino Shield Thread

PostWed Feb 05, 2020 8:00 pm

Alrighty... got it workin with the help of Daniel Wittenaar :)
Offline

-Nick-

  • Posts: 3
  • Joined: Fri Dec 21, 2018 12:46 pm
  • Real Name: Niklas Paprotti

Re: Arduino Shield Thread

PostWed Apr 22, 2020 10:09 am

Hello everyone,

I am currently developing a camera remote control and unfortunately hang in one place.
I don't get the following commands to work:

SDI-Overlay.png
SDI-Overlay.png (10.83 KiB) Viewed 132 times

SDI-FocusAssist.png
SDI-FocusAssist.png (21.24 KiB) Viewed 132 times


Did anyone ever get these commands up and running?
Could someone send me a code sample?
Besides, I don't understand how to interpret the int 16 bit-field.
The rest of my code is working fine.

I would be very pleased to receive an answer.
Greetings from Germany,
Nick

PS.: I use a shield with the current software version 1.1.
As a camera I use a Ursa Mini 4k. But I also tried it with a Ursa fullsize and a Ursa Mini Pro G1.
Offline

mizelly41

  • Posts: 1
  • Joined: Wed Apr 22, 2020 10:14 pm
  • Real Name: Michael Mizell

Re: Arduino Shield Thread

PostWed Apr 22, 2020 10:30 pm

Is the shield able to read the incoming tally?
I am interested in hooking up an LED to the Arduino and making my own tally light at a non Blackmagic camera.
Offline

Valentin_Pscheidl

  • Posts: 1
  • Joined: Sat May 09, 2020 10:50 am
  • Real Name: Valentin Pscheidl

Re: Arduino Shield Thread

PostMon May 11, 2020 10:38 am

Im currently getting started with the shield. Most of the commands I like to use I got working, but my main problem with the shield ist getting my PGM through the device while controlOverwrite ist active. I only reseave a frame at my camera in the second I refresh a command (LED 4 blinks at the shield). This isn't just a problem of my custom sketches, it also takes place with the example PotZoom Sketch.
Did anyone had simular experience and found a solution?

Gesendet von meinem SM-N950F mit Tapatalk
Previous

Return to Live Production

Who is online

Users browsing this forum: Dave Del Vecchio, Stamlit and 31 guests