ATEM Streaming Bridge for Remote Viewing

Do you have questions about Desktop Video, Converters, Routers and Monitoring?
  • Author
  • Message
Offline
User avatar

pvillow

  • Posts: 6
  • Joined: Sat Apr 25, 2020 2:53 pm
  • Real Name: Peace Villow

ATEM Streaming Bridge for Remote Viewing

PostFri Jul 31, 2020 7:16 am

Just finished watching the announcement on youtube.
I understand that it is a receiver/decoder but can BMD make it as a transmitter/encoder also? As a separate converter or a duplex model in one converter. This is really useful for remote editing/grading/vfx preview that only need 1 input send to 1 output point-to-point. The requirement to use ATEM Mini Pro just to send 1 SDI signal is too much for 1-to-1 remote viewing.
www.vimeo.com/pvillow
www.posthouseindo.com
Offline

David Peterson

  • Posts: 283
  • Joined: Thu Apr 16, 2015 11:45 am
  • Location: Auckland, New Zealand

Re: ATEM Streaming Bridge for Remote Viewing

PostTue Aug 04, 2020 3:39 am

Got another question about this, you could use this for viewing a quad combo monitor of all four inputs at once on a single SDI monitor?
http://IronFilm.co.nz/Sound/
https://www.youtube.com/c/SoundSpeeding
Location Sound Recordist, in Auckland New Zealand.
Offline

LouisBacker

  • Posts: 51
  • Joined: Thu Oct 31, 2019 11:50 pm
  • Location: Oxford, UK.
  • Real Name: LouisBacker

Re: ATEM Streaming Bridge for Remote Viewing

PostFri Aug 07, 2020 2:02 pm

It would be good to have a Blackmagic encoder to complement their decoder. I've no need for an ATEM Mini of any variant, as we don't use HDMI. If they made an SDI variant - different matter. As it is, we have to put an Ultrastudio Mini 4K on the output of our BM vision mixer, then Thunderbolt into an iMac running OBS. An expensive and convoluted streaming solution.
4 x Ursa Broadcasts, ATEM CCU, ATEM TV Studio 4K. NewTek Tricaster 460. Breville toaster and kettle.
Offline
User avatar

pvillow

  • Posts: 6
  • Joined: Sat Apr 25, 2020 2:53 pm
  • Real Name: Peace Villow

Re: ATEM Streaming Bridge for Remote Viewing

PostThu Sep 17, 2020 10:29 am

LouisBacker wrote:It would be good to have a Blackmagic encoder to complement their decoder. I've no need for an ATEM Mini of any variant, as we don't use HDMI. If they made an SDI variant - different matter. As it is, we have to put an Ultrastudio Mini 4K on the output of our BM vision mixer, then Thunderbolt into an iMac running OBS. An expensive and convoluted streaming solution.

Yes, with separate SDI encoder this would be a great solution for low cost point-to-point streaming.
www.vimeo.com/pvillow
www.posthouseindo.com

Return to Post Production

Who is online

Users browsing this forum: No registered users and 7 guests