ATEM Camera Converter - won't output 1080p50

Questions about ATEM Switchers, Camera Converter and everything live!
  • Author
  • Message
Offline

OliverFunke

  • Posts: 1
  • Joined: Tue Jun 08, 2021 12:26 pm
  • Location: Stockholm, Sweden
  • Real Name: Oliver Funke

ATEM Camera Converter - won't output 1080p50

PostTue Jun 08, 2021 12:34 pm

Hi,

Recently we discovered some issues with our ATEM Camera Converter's. There are no problem to input 720p50p, but when we try to input 1080p50p, our camera converters doesn't detect any video signal (there are no video in the converter output and neither do the video "green light" show. We have tried to input both 1080p50p and 1080p50i from both a pre recorded 1080p50p/1080p50i from our Video Assist. We have also tried to input 1080p50p via pre-recorded from our HyperDeck Studio.
However, we tried to direct input 1080p50p and 1080p50i via our Panasonic AG-AC160AEJ. When we did that, the ATEM Camera Converter did detect the input and it was displayed correctly. All of our inputs are routed via an ATEM Broadcast Studio 4k.

All converters are up to date with the latest firmware.
Anyone knows what his problem we are facing are?
Offline
User avatar

Xtreemtec

  • Posts: 5391
  • Joined: Wed Jan 02, 2013 11:48 am
  • Location: The Netherlands

Re: ATEM Camera Converter - won't output 1080p50

PostMon Jun 14, 2021 12:29 pm

Level A vs Level B.. The converter only accepts 1 type of 1080P and not the other.. ;)
Daniel Wittenaar .:: Xtreemtec Media Productions ::. -= www.xtreemtec.nl =-
4K OBV Trailer, ATEM TVS HD, 4M/E Broadcast Studio 4K, Constelation 8K, Hyperdeck Studio 12G, Ursa Broadcast 4K, 4K fiber converters with Sony Control

Return to Live Production

Who is online

Users browsing this forum: jdswedberg and 53 guests