Jump to: Board index » General » Fusion

Fusion studio 17.2 does'nt launch

Learn about 3D compositing, animation, broadcast design and VFX workflows.
  • Author
  • Message
Offline

romainclark

  • Posts: 25
  • Joined: Wed Nov 06, 2019 4:02 am
  • Real Name: Romain Clark

Fusion studio 17.2 does'nt launch

PostThu May 13, 2021 10:24 pm

Just installed fusion 17.2 but it won't launch, even with dongle connected. DRV 17.2 no problem.
Dell G5 5587, windows 10, 32gig of ram, Nividia Geforce 1060 with 6 gig of Vram.
Offline

Hideki Inoue

  • Posts: 208
  • Joined: Sun Nov 23, 2014 8:26 am
  • Location: Tokyo, Japan

Re: Fusion studio 17.2 does'nt launch

PostFri May 14, 2021 12:22 pm

Try temporarily moving Fusion.prefs to a different location, that's what I did in 17.1.
Fusion Studio v18.6.4 / DeckLink Mini Monitor 4K
Intel® Core™ i9-13900KS / 128GB RAM / Nvidia Geforce RTX 4090 (546.33) / Windows 10 Pro 22H2
Intel® Core™ i9-7980XE / 128GB RAM / Nvidia RTX A5000 (536.67) / Windows 10 Pro 22H2
Offline

romainclark

  • Posts: 25
  • Joined: Wed Nov 06, 2019 4:02 am
  • Real Name: Romain Clark

Re: Fusion studio 17.2 does'nt launch

PostSat May 15, 2021 12:42 am

Tried it but still does not launch.
Offline
User avatar

Bryan Ray

  • Posts: 2474
  • Joined: Mon Nov 28, 2016 5:32 am
  • Location: Los Angeles, CA, USA

Re: Fusion studio 17.2 does'nt launch

PostSat May 15, 2021 2:02 am

This seems to be a problem with some services blocking the port that Fusion uses to communicate with the dongle. On Windows, Synology's CloudStation service (not the backup software, but the service that runs all the time) is one such. McAfee security is another that may block it. Seems like there was one more that somebody mentioned just within the last few weeks, but I don't recall what it was.

It might be possible to determine if this is the problem for you. Try starting Resolve, then once its running, start Fusion. I don't know if this test still works, but it did back in Resolve 15. If it does work, then it confirms that you have a software conflict of some kind. If it doesn't, then it may still be the case. Or it may not.
Bryan Ray
http://www.bryanray.name
http://www.sidefx.com
Offline

romainclark

  • Posts: 25
  • Joined: Wed Nov 06, 2019 4:02 am
  • Real Name: Romain Clark

Re: Fusion studio 17.2 does'nt launch

PostSat May 15, 2021 11:21 pm

Tried to launch Resolve then Fusion, but it still would not launch.
Offline
User avatar

Bryan Ray

  • Posts: 2474
  • Joined: Mon Nov 28, 2016 5:32 am
  • Location: Los Angeles, CA, USA

Re: Fusion studio 17.2 does'nt launch

PostSat May 15, 2021 11:35 pm

Oh, I just remembered another possibility: Have you tried the dongle on a different USB bus? I've heard of problems with specific ports before, especially the pass-through ports on monitors and keyboards.
Bryan Ray
http://www.bryanray.name
http://www.sidefx.com
Offline

romainclark

  • Posts: 25
  • Joined: Wed Nov 06, 2019 4:02 am
  • Real Name: Romain Clark

Re: Fusion studio 17.2 does'nt launch

PostSun May 16, 2021 10:34 pm

Good idea. I tried all ports on the laptop and it still does not launch. On my other computer it launches even without the dongle connected.
Offline

Fernando Vargas

  • Posts: 9
  • Joined: Sat Aug 05, 2017 1:14 am

Re: Fusion studio 17.2 does'nt launch

PostMon May 17, 2021 5:02 pm

Same here. Fusion Studio 7. 2 quits before loading both in Catalina and Big Sur. It never happened before and I have no idea how to fix it. Am I missing something? Thanks in advance
Offline

valentine andreyev

  • Posts: 17
  • Joined: Fri Sep 07, 2012 6:58 pm

Re: Fusion studio 17.2 does'nt launch

PostTue May 18, 2021 9:02 am

Same here, Fusion 17.2 didn`t launch after update (17.1 worked just fine before) on Windows. Resolve works without any trouble. Also under MacOS everything works fine.
Offline

acrux7245

  • Posts: 6
  • Joined: Sun Sep 27, 2020 10:40 pm
  • Real Name: alexander cruz

Re: Fusion studio 17.2 does'nt launch

PostTue May 18, 2021 12:57 pm

Same here..got this error
this application failed cannot load Qt platform plugin"windows"
Offline

Nicolas

  • Posts: 31
  • Joined: Thu Jan 02, 2020 10:00 am
  • Real Name: Nicolas Genette

Re: Fusion studio 17.2 does'nt launch

PostTue May 18, 2021 2:02 pm

acrux7245 wrote:Same here..got this error
this application failed cannot load Qt platform plugin"windows"


Did you tried that ?
viewtopic.php?f=22&t=141305
Offline

valentine andreyev

  • Posts: 17
  • Joined: Fri Sep 07, 2012 6:58 pm

Re: Fusion studio 17.2 does'nt launch

PostWed May 19, 2021 4:24 am

Nicolas wrote:
acrux7245 wrote:Same here..got this error
this application failed cannot load Qt platform plugin"windows"


Did you tried that ?
viewtopic.php?f=22&t=141305


Didn`t help, but my symptoms is different though
Offline

Hendrik Proosa

  • Posts: 3006
  • Joined: Wed Aug 22, 2012 6:53 am
  • Location: Estonia

Re: Fusion studio 17.2 does'nt launch

PostWed May 19, 2021 7:55 am

That Qt platform error should have nothing to so with python so no idea why that suggested fix even worked. It is one dll with platform specific stuff that qt loads and uses for its libs and should be in the install dir under platforms/ subfolder. As I understand it, problem arises when qwindows.dll file is found from PATH or QT_PLUGIN_PATH, which loads before the one in install dir. And if there is a mismatch (qwindows.dll is tied to Qt version used for building the application), you get this error. So one suggestion is to check if env variable QT_PLUGIN_PATH is set and clear it (back up its value just in case) and if this doesn’t solve it, go through folders in PATH and look for platforms/ subdir containing qwindows.dll file. If it exists, remove said path from PATH variable.
I do stuff.
Offline

Nicolas

  • Posts: 31
  • Joined: Thu Jan 02, 2020 10:00 am
  • Real Name: Nicolas Genette

Re: Fusion studio 17.2 does'nt launch

PostWed May 19, 2021 8:13 am

Like said, no QT_PLUGIN_PATH or PATH and no qwindows in python36 folder (even empty python36 folder crash Fusion 17.2)
And no problem on same machines with Fusion 16.x, 17.0, 17.1, 17.1.1

So Fusion 17.2 definitely broke something there.
Offline

Hendrik Proosa

  • Posts: 3006
  • Joined: Wed Aug 22, 2012 6:53 am
  • Location: Estonia

Re: Fusion studio 17.2 does'nt launch

PostWed May 19, 2021 11:29 am

Might be that they packaged wrong file with new version.
I do stuff.
Offline

Hideki Inoue

  • Posts: 208
  • Joined: Sun Nov 23, 2014 8:26 am
  • Location: Tokyo, Japan

Re: Fusion studio 17.2 does'nt launch

PostWed May 26, 2021 5:22 am

Did you solve this problem? I tried 17.2 today on Windows 10 and had no problem starting.
Fusion Studio v18.6.4 / DeckLink Mini Monitor 4K
Intel® Core™ i9-13900KS / 128GB RAM / Nvidia Geforce RTX 4090 (546.33) / Windows 10 Pro 22H2
Intel® Core™ i9-7980XE / 128GB RAM / Nvidia RTX A5000 (536.67) / Windows 10 Pro 22H2
Offline

Dennis Fassbaender

  • Posts: 177
  • Joined: Fri Mar 11, 2016 11:16 pm

Re: Fusion studio 17.2 does'nt launch

PostWed May 26, 2021 7:28 am

Having the same problem.
But unfortunately it seems there is no solution.
There are some support requests here in the forum because of the same issue.
And i wrote an email to BMD - but got no answer till yet.

If anyone else having a solution, it would be fantastic!
Offline

Nicolas

  • Posts: 31
  • Joined: Thu Jan 02, 2020 10:00 am
  • Real Name: Nicolas Genette

Re: Fusion studio 17.2 does'nt launch

PostWed May 26, 2021 8:31 am

Same, did write to support last week, no news.

This 17.2 doesn't seems production ready at all, we didn't deployed it here stil 17.1.1
Offline

Fernando Vargas

  • Posts: 9
  • Joined: Sat Aug 05, 2017 1:14 am

Re: Fusion studio 17.2 does'nt launch

PostWed May 26, 2021 1:29 pm

Same here, no solution. I updated OS Big Sur to version 11.4 which came out few days ago, hoping it will solve it, but all the same. I had to roll back to 17.1.1.

Mac Pro (late 2013)
3 GHz 8-core intel Xeon E5
64RAM
AMD FirePro D700 6GB
Offline

romainclark

  • Posts: 25
  • Joined: Wed Nov 06, 2019 4:02 am
  • Real Name: Romain Clark

Re: Fusion studio 17.2 does'nt launch

PostThu May 27, 2021 12:14 am

Still not solved. I have one version installed on my workstation on windows 10 that run without problem. Is the one installed on my laptop that doesn't launch. BM Support told me to reinstall the OS. I downgraded in 17.1.1 instead.
Offline

Nicolas

  • Posts: 31
  • Joined: Thu Jan 02, 2020 10:00 am
  • Real Name: Nicolas Genette

Re: Fusion studio 17.2 does'nt launch

PostWed Jun 02, 2021 7:23 am

Seems ok with 17.2.1 !

:D
Offline

romainclark

  • Posts: 25
  • Joined: Wed Nov 06, 2019 4:02 am
  • Real Name: Romain Clark

Re: Fusion studio 17.2 does'nt launch

PostMon Jun 14, 2021 9:30 pm

Not for me!
Offline

Fernando Vargas

  • Posts: 9
  • Joined: Sat Aug 05, 2017 1:14 am

Re: Fusion studio 17.2 does'nt launch

PostTue Jun 15, 2021 1:18 pm

Davinci Resolve 17.2.1 works fine in my system. But I cannot install Fusion 17.2.1 to this date after following several tips in this and other forums. It's very fustrating. I need Fusion Studio badly.
Offline
User avatar

Bryan Ray

  • Posts: 2474
  • Joined: Mon Nov 28, 2016 5:32 am
  • Location: Los Angeles, CA, USA

Re: Fusion studio 17.2 does'nt launch

PostTue Jun 15, 2021 3:50 pm

Can't install is a different issue than can't launch. Would you mind starting a new thread so we can dissect that one in isolation? Please include a description of exactly what happens when you try to install and your system specifications. I've not yet encountered an inability to install the software, so I probably won't be any help, but at least it will be easier to gather data in a separate conversation.
Bryan Ray
http://www.bryanray.name
http://www.sidefx.com
Offline

Fernando Vargas

  • Posts: 9
  • Joined: Sat Aug 05, 2017 1:14 am

Re: Fusion studio 17.2 does'nt launch

PostTue Jun 15, 2021 10:22 pm

My mistake, I'm sorry. I can install Fusion Studio 17.2.1 alright, but it quits or crashes as soon as it launches. I had this problem before with previous versions when I had some OFX plugins installed but I removed them and that fixed the problem. Now I have Fusion Studio 17.1.1 installed and it has no issues but of course I would like to update to the new version 17.2.1.
My system specifications are:
Mac Pro (late 2013)
3GHz 8-core Intel Xeon E6
64 GB 1866 MHz DDR3
AMD FirePro D700 6 GB.

I appreciate your response, thank you.
Offline

Philippe Metro

  • Posts: 90
  • Joined: Mon Nov 03, 2014 9:11 pm

Re: Fusion studio 17.2 does'nt launch

PostMon Jun 21, 2021 7:47 am

17.2.1 won't launch for me either on Catalina.

I'm using a license key, not a dongle.
If I deactivate the license on 17.1.1, then install 17.2 or 17.2.1 and launch it, it will ask for license number, then it opens normally... just once....
After closing it, it won't open again.
Offline

JeromeD

  • Posts: 4
  • Joined: Wed Jun 23, 2021 9:51 am
  • Real Name: Jerome Debève

Re: Fusion studio 17.2 does'nt launch

PostWed Jun 23, 2021 10:20 am

Hi,

Same problem here.
Fusion 17 won't launch, or only will randomly start depending on the network I'm connected to.
So I'm stuck with 16, which is a shame as the new layouts really helped on a dual monitor system...
I'm on a i9/32GB RAM/RTX2070 Laptop running Win10, Fusion Studio USB dongle.
Is that actively being looked into ? It seems to be a serious issue from the number of comments.
Offline

Philippe Metro

  • Posts: 90
  • Joined: Mon Nov 03, 2014 9:11 pm

Re: Fusion studio 17.2 does'nt launch

PostThu Jul 01, 2021 12:22 pm

17.2.2 won't launch either for me.
Offline

romainclark

  • Posts: 25
  • Joined: Wed Nov 06, 2019 4:02 am
  • Real Name: Romain Clark

Re: Fusion studio 17.2 does'nt launch

PostFri Jul 02, 2021 12:15 am

17.2.2 of fusion would not launch either. No problem with Resolve studio 17.2.2, this is weird. Resolve is quite bigger than fusion.
Offline

Simon Golob

  • Posts: 24
  • Joined: Sat Jul 15, 2017 2:27 pm

Re: Fusion studio 17.2 does'nt launch

PostFri Jul 02, 2021 2:36 pm

Same here. Fusion 17.2.2 doesn`t launch

Simon
PC Windows 10
Intel Core i9-9900K, 8x 3.6GHz, 64 GB RAM
NVIDIA GeForce RTX 2080 Super

Davinci Resolve Studio 18.5
Fusion Studio 18.1
Davinci Resolve Editor Keyboard
Offline
User avatar

AlexYez

  • Posts: 62
  • Joined: Tue Apr 21, 2020 5:20 pm
  • Location: Planet Earth
  • Real Name: Alexander Ezhov

Re: Fusion studio 17.2 does'nt launch

PostSun Jul 11, 2021 2:26 pm

Same thing, fusion studio 17.2.2. won't start, Davinci 17.2.2. works fine. No error message shows, just silence. Tried clearing settings and installing 17.2.1 but to no avail(
Alexander Ezhov,
Compositing Artist, Davinci Resolve Certified Trainer
Offline
User avatar

AlexYez

  • Posts: 62
  • Joined: Tue Apr 21, 2020 5:20 pm
  • Location: Planet Earth
  • Real Name: Alexander Ezhov

Re: Fusion studio 17.2 does'nt launch

PostMon Jul 12, 2021 8:41 am

I may have found a solution, in the Nvidia Control Panel settings you have to force fusion studio to use a high performance video processor. After this setting was applied, Fusion Studio started up
Alexander Ezhov,
Compositing Artist, Davinci Resolve Certified Trainer
Offline

Philippe Metro

  • Posts: 90
  • Joined: Mon Nov 03, 2014 9:11 pm

Re: Fusion studio 17.2 does'nt launch

PostTue Jul 13, 2021 7:44 am

AlexYez wrote:I may have found a solution, in the Nvidia Control Panel settings you have to force fusion studio to use a high performance video processor. After this setting was applied, Fusion Studio started up


Good to know there might be a solution for windows, unfortunately there is no such a thing in OSX. Hopefully it will help BMD to solve the issue.
Offline

Fernando Vargas

  • Posts: 9
  • Joined: Sat Aug 05, 2017 1:14 am

Re: Fusion studio 17.2 does'nt launch

PostTue Jul 13, 2021 11:50 pm

I installed Fusion Studio 17.2.2 and again It open briefly and quits or crashes. I also hope BMD can helps us fix this problem.
Offline

romainclark

  • Posts: 25
  • Joined: Wed Nov 06, 2019 4:02 am
  • Real Name: Romain Clark

Re: Fusion studio 17.2 does'nt launch

PostSun Jul 18, 2021 2:09 am

AlexYez wrote:I may have found a solution, in the Nvidia Control Panel settings you have to force fusion studio to use a high performance video processor. After this setting was applied, Fusion Studio started up



Yep. Now it launches. Thanks for the tip.
Offline
User avatar

Bryan Ray

  • Posts: 2474
  • Joined: Mon Nov 28, 2016 5:32 am
  • Location: Los Angeles, CA, USA

Re: Fusion studio 17.2 does'nt launch

PostSun Jul 18, 2021 2:23 am

And thank you for the confirmation! I'll add that solution to my troubleshooting list. Some clarification please: Is this something that only shows up if you have multiple graphics processors available? I don't see it in my Nvidia control panel. A screenshot would be appreciated.
Bryan Ray
http://www.bryanray.name
http://www.sidefx.com
Offline

Simon Golob

  • Posts: 24
  • Joined: Sat Jul 15, 2017 2:27 pm

Re: Fusion studio 17.2 does'nt launch

PostTue Jul 20, 2021 12:54 pm

Today I have installed the new NVIDIA Studio Driver 471.41.
Now Fusion launch without problems.

Simon
PC Windows 10
Intel Core i9-9900K, 8x 3.6GHz, 64 GB RAM
NVIDIA GeForce RTX 2080 Super

Davinci Resolve Studio 18.5
Fusion Studio 18.1
Davinci Resolve Editor Keyboard
Offline

Saku Partamies

  • Posts: 3
  • Joined: Sun Aug 01, 2021 9:39 am
  • Real Name: Saku Partamies

Re: Fusion studio 17.2 does'nt launch

PostSun Aug 01, 2021 9:43 am

Hi, everyone.

I'm having a project which I would need to use Fusion. I have an existing license for Resolve, but it would be more convenient to use standalone Fusion. As the same license should work I installed Fusion Studio 17.2.2, but I have same problem as many others in this discussion. At startup Fusion window opens and briefly has a text "Checking for License". Then it closes by itself without any error message. Below is list what I've tried, but is there anything else someone would know that I can try to get it working?

System:
- Laptop PC, Windows 10, AMD Ryzen 9 5900HX, 32gb
- Radeon GPU + mobile Geforce RTX3080 12gb
- External Display + Laptop Display

Tried:
- Fusion Studio 17.2.2 & 17.0
- Resolve open & not open same time as launching Fusion
- Updated latest Nvidia Game ready drivers (471.41)
- Closed all processes related to Synology NAS backup
- Deleted Fusion.prefs file
- Disabled Windows Firewall

Thanks.
Offline

Saku Partamies

  • Posts: 3
  • Joined: Sun Aug 01, 2021 9:39 am
  • Real Name: Saku Partamies

Re: Fusion studio 17.2 does'nt launch

PostSat Aug 07, 2021 8:40 am

Has everyone else succeeded getting Fusion running or is there others who still have the problem?

I’d be happy to hear suggestions what to try next. I don’t know if my issue is problem with license check during start or something else so it’s hard for me to find a solution. Is Fusion creating a log file during startup that would have relevant information?
Offline

JanWatson

  • Posts: 1
  • Joined: Fri Aug 13, 2021 12:19 pm
  • Real Name: Jan Watson

Re: Fusion studio 17.2 does'nt launch

PostFri Aug 13, 2021 12:46 pm

Saku Partamies wrote:Has everyone else succeeded getting Fusion running or is there others who still have the problem?


Everything works as usual ;)
Offline

Fernando Vargas

  • Posts: 9
  • Joined: Sat Aug 05, 2017 1:14 am

Re: Fusion studio 17.2 does'nt launch

PostWed Aug 18, 2021 10:18 pm

For those who still have problems launching Fusion Studio 17.2.2 but can launch 17.1.1 without any issues, this could help:
1. Open Fusion Studio 17.1.1, go to window>view layout>reset layout to default (which means that Fusion layout should be visible only in one monitor if you have been working with two monitors), then go to preferences>global and Default Settings>Layout and click on Grab program layout and Save. This will reset Fusion layout to default. Then quit Fusion 17.1.1.
2. Install Fusion 17.2.2, restart and open Fusion.

This worked for me.
Offline
User avatar

Bryan Ray

  • Posts: 2474
  • Joined: Mon Nov 28, 2016 5:32 am
  • Location: Los Angeles, CA, USA

Re: Fusion studio 17.2 does'nt launch

PostThu Aug 19, 2021 12:28 am

Thanks for that update!
Bryan Ray
http://www.bryanray.name
http://www.sidefx.com
Offline
User avatar

TheBloke

  • Posts: 1905
  • Joined: Sat Nov 02, 2019 11:49 pm
  • Location: UK
  • Real Name: Tom Jobbins

Re: Fusion studio 17.2 does'nt launch

PostThu Aug 19, 2021 8:05 am

I can add that when I first ran 17.2.2, it crashed within a few seconds of opening every time. I had to delete my Fusion.prefs file. Maybe if I'd tried resetting the UI first, that would have solved it, but I didn't try it.

Then the other day I suddenly got into the same crash situation, or similar anyway. I opened Fusion and it would suddenly crash within 30 - 90 seconds.

Moving my Fusion.prefs solved it again, so I compared what was different in my current prefs to a backup from a few days earlier. I eventually found the culprit:
Code: Select all
   EnvironmentVars = {
      FUSION_Log = "false"
       },
Earlier that day I had noticed Help -> Logging, and had enabled it:

Image

It didn't actually seem to generate any extra logs at all. What it did do was cause Fusion Studio to die every time I subsequently opened it.

TLDR: Don't use Help -> Logging! At least on macOS, it adds a Fusion.prefs value that breaks Fusion Studio, and even toggling it off again doesn't fix it, because the mere presence of the EnvironmentVars -> FUSION_Log code I showed above is enough to bring down Fusion.

Attached is a crash log, in case anyone from BMD sees this (when I have time I'll report it direct to BMD support).
Fusion_2021-08-19-085716_Eddie.crash.zip
(30.28 KiB) Downloaded 287 times
I note that the top of the stack trace is:
Code: Select all
Thread 0 Crashed:: GUI Thread  Dispatch queue: com.apple.main-thread
0   libsystem_c.dylib                0x00007fff2034205d __findenv_locked + 52
1   libsystem_c.dylib                0x00007fff20342161 getenv + 54
"findenv" and "getenv" being related to environment variables, which fits with those new lines added to Fusion.prefs - adding (or checking for) FUSION_Log environment variable.

So it would seem that maybe Fusion Studio's environment variable handling is broken in Fusion Studio 17.2.2 - at least on macOS. I've not yet tested Windows.
Resolve Studio 17.4.3 and Fusion Studio 17.4.3 on macOS 11.6.1

Hackintosh:: X299, Intel i9-10980XE, 128GB DDR4, AMD 6900XT 16GB
Monitors: 1 x 3840x2160 & 3 x 1920x1200
Disk: 2TB NVMe + 4TB RAID0 NVMe; NAS: 36TB RAID6
BMD Speed Editor
Offline

Philippe Metro

  • Posts: 90
  • Joined: Mon Nov 03, 2014 9:11 pm

Re: Fusion studio 17.2 does'nt launch

PostThu Aug 19, 2021 2:57 pm

Fernando Vargas wrote:For those who still have problems launching Fusion Studio 17.2.2 but can launch 17.1.1 without any issues, this could help:
1. Open Fusion Studio 17.1.1, go to window>view layout>reset layout to default (which means that Fusion layout should be visible only in one monitor if you have been working with two monitors), then go to preferences>global and Default Settings>Layout and click on Grab program layout and Save. This will reset Fusion layout to default. Then quit Fusion 17.1.1.
2. Install Fusion 17.2.2, restart and open Fusion.

This worked for me.


So far, it's working for me too on Big Sur.
Thank you :-)
Offline

Erkan Ozgur Yilmaz

  • Posts: 19
  • Joined: Tue May 02, 2017 6:28 pm

Re: Fusion studio 17.2 does'nt launch

PostSat Aug 28, 2021 7:24 am

In 17.3 I've the same problem, I think...

I'm on Fedora 34.

Even if the dongle is connected, the "Activation Key" request appears and asks me a license key where as I have the USB Dongle.

It appears that FusionServer is not able to start:
Code: Select all
QSocketNotifier: Can only be used with threads started with QThread
DNX SDK API version 2.6.1-19-r
libDeckLinkAPI.so: cannot open shared object file: No such file or directory
Unable to read VR Path Registry from /home/eoyilmaz/.config/openvr/openvrpaths.vrpath
10:09:53,893 | INFO  | GPUDetect          | Starting GPUDetect 1.1_3-a5
10:09:54,060 | DEBUG | GPUDetect          |   - System Info: 166 ms.
10:09:54,076 | DEBUG | GPUDetect          |   - OpenCL: 3 detected in 16 ms.
10:09:54,078 | DEBUG | GPUDetect          |   - CUDA: 3 detected in 2 ms.
10:09:54,092 | DEBUG | GPUDetect          |   - Xorg: 3 detected in 13 ms.
FusionScript Server [35826] Started
Host 'Fusion' [35794] Added
10:09:54,115 | DEBUG | GPUDetect          |   - NVML: 3 detected in 22 ms.
10:09:54,115 | DEBUG | GPUDetect          |   - GPU Matching: 3 matched in 0 ms.
10:09:54,115 | INFO  | GPUDetect          | Done in 221 ms.
10:09:54,115 | INFO  | GPUDetect          | Detected System:
10:09:54,115 | INFO  | GPUDetect          |   - OS: Linux Fedora release 34 (Thirty Four)
10:09:54,115 | INFO  | GPUDetect          |   - Model: ASRock X399 Professional Gaming
10:09:54,115 | INFO  | GPUDetect          |   - System ID: 6112bf8a278f4b27af335d7395255a68
10:09:54,115 | INFO  | GPUDetect          |   - CPU: AMD Ryzen Threadripper 1900X, 16 threads, x86-64
10:09:54,115 | INFO  | GPUDetect          |   - RAM: 8.7 GiB used of 125.7 GiB
10:09:54,115 | INFO  | GPUDetect          |   - NVIDIA GPU Driver: 470.63, supports CUDA 11.4
10:09:54,115 | INFO  | GPUDetect          | Detected 3 GPUs:
10:09:54,115 | INFO  | GPUDetect          |   - "NVIDIA GeForce RTX 3090" (gpu:3bdb9858.0b957bcf)
10:09:54,115 | INFO  | GPUDetect          |     Discrete, 7 MiB used of 22.6 GiB VRAM, PCI:8:0.0
10:09:54,115 | INFO  | GPUDetect          |     Matches: CUDA, NVML, OpenCL, XOrg
10:09:54,115 | INFO  | GPUDetect          |   - "NVIDIA GeForce RTX 3090" (gpu:3bdb9858.5ad4b8df)
10:09:54,115 | INFO  | GPUDetect          |     Discrete, 7 MiB used of 22.6 GiB VRAM, PCI:9:0.0
10:09:54,115 | INFO  | GPUDetect          |     Matches: CUDA, NVML, OpenCL, XOrg
10:09:54,116 | INFO  | GPUDetect          |   - "NVIDIA GeForce GTX 1050 Ti" (gpu:10ade2ed.5f245765) <- Main Display GPU
10:09:54,116 | INFO  | GPUDetect          |     Discrete, 640 MiB used of 3.7 GiB VRAM, PCI:66:0.0
10:09:54,116 | INFO  | GPUDetect          |     Matches: CUDA, NVML, OpenCL, XOrg
10:09:54,116 | INFO  | GPUDetect          | Detected 1 monitors:
10:09:54,116 | INFO  | GPUDetect          |   - "Monitor" <- Main Monitor
10:09:54,116 | INFO  | GPUDetect          |     2560x1440, connected to "NVIDIA GeForce GTX 1050 Ti" (gpu:10ade2ed.5f245765)
QWidget::setLayout: Cannot set layout to 0
QWidget::setLayout: Cannot set layout to 0
QWidget::setLayout: Cannot set layout to 0
Host 'FusionServer' [35846] Added
Host 'FusionServer' [35958] Added
Host 'FusionServer' Removed
Host 'FusionServer' Removed
QWidget::setLayout: Cannot set layout to 0
QWidget::setLayout: Cannot set layout to 0
Host 'FusionServer' [36484] Added
Host 'FusionServer' Removed
QWidget::setLayout: Cannot set layout to 0
QWidget::setLayout: Cannot set layout to 0
Host 'FusionServer' [36780] Added
Host 'FusionServer' Removed
QWidget::setLayout: Cannot set layout to 0
QWidget::setLayout: Cannot set layout to 0
Host 'FusionServer' [37205] Added
Host 'FusionServer' Removed


EDIT: Fusion 17.3 launches without any problem in my work computer. The problem is in my home computer.
Offline

Saku Partamies

  • Posts: 3
  • Joined: Sun Aug 01, 2021 9:39 am
  • Real Name: Saku Partamies

Re: Fusion studio 17.2 does'nt launch

PostSun Aug 29, 2021 3:12 pm

Finally I also got Fusion Studio running. I installed 17.3 and that works without a problem
I use 100% same computer and system setup and only difference is the Fusion version. 17.1 and 17.2 didn't start no matter what I tried.

Hopefully this latest version works for everyone else as well.
Offline
User avatar

TheBloke

  • Posts: 1905
  • Joined: Sat Nov 02, 2019 11:49 pm
  • Location: UK
  • Real Name: Tom Jobbins

Re: Fusion studio 17.2 does'nt launch

PostThu Sep 02, 2021 8:55 am

TheBloke wrote:TLDR: Don't use Help -> Logging! At least on macOS, it adds a Fusion.prefs value that breaks Fusion Studio, and even toggling it off again doesn't fix it, because the mere presence of the EnvironmentVars -> FUSION_Log code I showed above is enough to bring down Fusion.
This has been fixed in 17.3.1. Thanks for that.
Resolve Studio 17.4.3 and Fusion Studio 17.4.3 on macOS 11.6.1

Hackintosh:: X299, Intel i9-10980XE, 128GB DDR4, AMD 6900XT 16GB
Monitors: 1 x 3840x2160 & 3 x 1920x1200
Disk: 2TB NVMe + 4TB RAID0 NVMe; NAS: 36TB RAID6
BMD Speed Editor
Offline

Erkan Ozgur Yilmaz

  • Posts: 19
  • Joined: Tue May 02, 2017 6:28 pm

Re: Fusion studio 17.2 does'nt launch

PostThu Oct 07, 2021 9:06 pm

After I updated Fusion to 17.3.1, I still had the problem. But, I think I found a solution;
starting FusionServer by hand solved my problem.

I also set the SELinux context for the FusionServer executable from "unconfined_u:object_r:usr_t:s0" to "system_u:object_r:initrc_exec_t:s0". This may helped too, I didn't check it. But Fusion runs properly now.

Return to Fusion

Who is online

Users browsing this forum: Peter Chamberlain and 24 guests