- Posts: 18
- Joined: Sat Apr 11, 2015 3:50 am
I have been asked to assist in the integration of 4 new Studio Fiber Converters for a new customer. I have been reading some old posts here that suggested that the 25 pin D connector is not active. The posts were dated years ago, so I am hoping that someone else has some recent experience with this. BMD Tech Support was vague on the answer and at one point in my conversation wondered aloud if the 25 D connector tally had been implemented yet. I am applying 5 volts per the pin-out diagram for red tally, but no joy. I also asked tech support whether the tally on the converter would illuminate if the camera was not attached. No answer on that either.
Can anyone help a guy out here? I spent the better part of the AM making up some beautiful 25 D cables for intercom (4 wire...another surprise) and tally. I started connecting the tally because I thought that would be the "easy" part.
"10% of the facility build-out is the tech core, the other 90% is tally and intercom"
Can anyone help a guy out here? I spent the better part of the AM making up some beautiful 25 D cables for intercom (4 wire...another surprise) and tally. I started connecting the tally because I thought that would be the "easy" part.
"10% of the facility build-out is the tech core, the other 90% is tally and intercom"
John Fleetwood
President
Contract Video Specialists, Inc.
Jessup Maryland
www.contractvideo.com
President
Contract Video Specialists, Inc.
Jessup Maryland
www.contractvideo.com