Ever since I started using the Speed Editor, it's caused an issue where it will freeze the auto backup feature. I think it's because I could be in the middle of an action when it tries to do this and it locks it up...Anyone else?
Mac Studio M1 Ultra 20C CPU | 64C GPU | 64GB RAM | 1TB SSD LG 42" OLED C2
You're not the first person to report an issue like this. I remember someone reporting it a couple of months ago. I tried recreating it at the time but was unable to. So yeah it could be Windows specific perhaps.
Resolve Studio 17.4.3 and Fusion Studio 17.4.3 on macOS 11.6.1
Yes, I see it some times... its not Speed Editor specific. Just as a genera rule now, if and when I notice the Performing Backup progress window pop up then I just let it finish before continuing with whatever I'm doing. Most times the backup dialogue is up for just a second then gone, but sometimes it can seem like it's stuck for 20 or 30 seconds. Either way, as noted, I just stop interacting with the app while its happening ... and have a quick look at the forum instead. And, no, thats not whats happening at the moment.
Let's have a return to the glory days, when press releases for new versions included text like "...with over 300 new features and improvements that professional editors and colorists have asked for."
Well this just happened to me. I'm not sure if I was dragging the playhead or using the Speed Editor but I felt the action locking when the "Performing Backup" window popped up. It's stuck at 3% for a few minutes now. It doesn't seem to be willing to move and I'm afraid forcing DR to close will corrupt something. I suppose it would just ruin the backup, right, not the project?
dr_crash.png (2.16 KiB) Viewed 3543 times
DR Studio 18.5.1 Build 6 | Win 10 Home Ryzen 9 5900X | 64 GB RAM |GTX 3060 Ti, Studio Driver OS Samsung 980 Pro | Cache Samsung 990 Pro | Media Samsung 870 EVO DaVinci Resolve Speed Editor
Andy Mees wrote:Yes, I see it some times... its not Speed Editor specific. Just as a genera rule now, if and when I notice the Performing Backup progress window pop up then I just let it finish before continuing with whatever I'm doing. Most times the backup dialogue is up for just a second then gone, but sometimes it can seem like it's stuck for 20 or 30 seconds. Either way, as noted, I just stop interacting with the app while its happening ... and have a quick look at the forum instead. And, no, thats not whats happening at the moment.
For sure! Same here. But when I’m cranking away sometimes I don’t notice it and by that time I’ve pressed “IN, OUT, APPEND” and then resolve hates me. Haha. It hasn’t happened too often lately. I set it to backup ever 35min and now just hit save like a mad man. Wish the speed editor had a Save button.
Sent from my iPhone using Tapatalk
Mac Studio M1 Ultra 20C CPU | 64C GPU | 64GB RAM | 1TB SSD LG 42" OLED C2
lcanau wrote:Well this just happened to me. I'm not sure if I was dragging the playhead or using the Speed Editor but I felt the action locking when the "Performing Backup" window popped up. It's stuck at 3% for a few minutes now. It doesn't seem to be willing to move and I'm afraid forcing DR to close will corrupt something. I suppose it would just ruin the backup, right, not the project?
dr_crash.png
For me it just lost like the last 4 minutes of work. I don’t use live save because it’s sooo buggy on my machine.
Sent from my iPhone using Tapatalk
Mac Studio M1 Ultra 20C CPU | 64C GPU | 64GB RAM | 1TB SSD LG 42" OLED C2
This is really weird, but I've had this happen a couple more times, but I think I found some sort of work around. When it happens, if after a few seconds I press the space bar on the speed editor the message goes away and everything is back to normal
iwozzy wrote:This is really weird, but I've had this happen a couple more times, but I think I found some sort of work around. When it happens, if after a few seconds I press the space bar on the speed editor the message goes away and everything is back to normal
Damn, interesting. I usually just hold my breath and don’t move. So I’ll try that next time.
Sent from my iPhone using Tapatalk
Mac Studio M1 Ultra 20C CPU | 64C GPU | 64GB RAM | 1TB SSD LG 42" OLED C2
iwozzy wrote:This is really weird, but I've had this happen a couple more times, but I think I found some sort of work around. When it happens, if after a few seconds I press the space bar on the speed editor the message goes away and everything is back to normal
I hit the SHTL/JOG/SYNC buttons (to wake it up, save the spacebar life) when this happens to make the SE snap out of its stuck state and allow backups to continue. It might be the rotary encoder getting bumped while backups are starting and interrupting the process. Just a theory though.
DRStudio 17.4.6 + SE old Intel Win10 A2485 64GB 12.4
I had my backup on dropbox and the destination set to online only to save space. But every time a backup was made, dropbox had to download the backup files, and it was one file at the time. After setting the backup folder to be available offline, I haven't had any issues with resolve freezing when doing the backups.
So for me, the issue wasn't even in resolve at all.
This thread has been up for a while now, but just in case someone finds it like I just did after experiencing the described issue (DVR freezing while doing Project Backup, apparently because the start of that automated task coincided with me pressing a button on the Speed Editor), I want to confirm that the solution mentioned by iwozzy above, pressing the STOP/PLAY bar on the Speed Editor, immediately solved it for me.
Kinetropico wrote: I want to confirm that the solution mentioned by iwozzy above, pressing the STOP/PLAY bar on the Speed Editor, immediately solved it for me.
Works!!
Konstantin Nikkari Filmmaker at Raccoonbox Production
Raccoonbox - Good Story Inside www.raccoonbox.com / @raccoonbox.production
Instagram: @konstantin.nikkari
My goal is to understand the art of storytelling and how to entertain.
This has been happening to me for a while now. I have no Speed Editor. Just the computer gets stuck every time the app runs the auto-backup. I am on macOS 12.4 with a Hackintosh i9-7920X, Gigabyte X299, 64 GB ram, and AMD Radeon RX 5700 XT. It's pretty annoying, but I do not dare to disable the auto-backup.
iwozzy wrote:This is really weird, but I've had this happen a couple more times, but I think I found some sort of work around. When it happens, if after a few seconds I press the space bar on the speed editor the message goes away and everything is back to normal
It's still happening with me, just now stuck at 1%, and this solution - pressing the Speed Editor stop/play - worked. Resolve 18.1.2 on Windows. It feels as if it blocks if the backup starts when I'm performing some action, not sure if it was with the Speed Editor because I was using both the Editor and a Wacom Intuos Pro pen.
DR Studio 18.5.1 Build 6 | Win 10 Home Ryzen 9 5900X | 64 GB RAM |GTX 3060 Ti, Studio Driver OS Samsung 980 Pro | Cache Samsung 990 Pro | Media Samsung 870 EVO DaVinci Resolve Speed Editor
iwozzy wrote:This is really weird, but I've had this happen a couple more times, but I think I found some sort of work around. When it happens, if after a few seconds I press the space bar on the speed editor the message goes away and everything is back to normal
It's still happening with me, just now stuck at 1%, and this solution - pressing the Speed Editor stop/play - worked. Resolve 18.1.2 on Windows. It feels as if it blocks if the backup starts when I'm performing some action, not sure if it was with the Speed Editor because I was using both the Editor and a Wacom Intuos Pro pen.
Can confirm pressing stop/play on speed editor unblocks the backup. Thank you for the fix!
Hi, I also confirm the mentioned solution works for me: pressing a key also on the micro pannel cause Resolve (18,5) to finish the backup and contine working... Thanks!
MihailCF DR Studio 19.beta1 i9-9900K, 64 GB RAM Samsung 860 Pro 2TB SSD (system) Samsung 970 Pro 512GB SSD WD Black SN850X 2TB SDD WD Black SN850X 4TB SDD WD 4TB HDD WD 10TB HDD GeForce RTX 2080Ti 11GB graphics Dell 2718Q UHD monitor Windows 10, 64 Bit
It's been awhile but it happened again today using the latest build, 18.5.1, stuck at 10% performing backup. Stop/Play button on the Speed Editor solved it. It's seems to happen if I press some key at the precise moment the performing backup box pops up.
DR Studio 18.5.1 Build 6 | Win 10 Home Ryzen 9 5900X | 64 GB RAM |GTX 3060 Ti, Studio Driver OS Samsung 980 Pro | Cache Samsung 990 Pro | Media Samsung 870 EVO DaVinci Resolve Speed Editor
iwozzy wrote:This is really weird, but I've had this happen a couple more times, but I think I found some sort of work around. When it happens, if after a few seconds I press the space bar on the speed editor the message goes away and everything is back to normal
Thank you! Shew, I thought I was about to lose the last 4-5 minutes of work.