Blackmagic Micro Converter 3D LUT Problem

Do you have questions about Desktop Video, Converters, Routers and Monitoring?
  • Author
  • Message
Offline

hjlee918

  • Posts: 8
  • Joined: Tue Apr 25, 2017 7:31 pm
  • Real Name: John Lee

Blackmagic Micro Converter 3D LUT Problem

PostMon Apr 11, 2022 9:25 am

I've recenlty purchased micro converter bidirectional SDI/HDMI 12g. The monitor is getting signal from hdmi out from this converter and converter get the signal from decklink 4k mini sdi port. I've calibrated monitor using calman software and uploaded 3D lut to the converter, but it generate delta error that is worse than pre calibration state. If I upload to Video Monitor Output in Resolve, then monitor is in almost perfect state , less than 1 delta error. Is Lut function in micro convert working, or am I missing something?
Last edited by hjlee918 on Mon Apr 11, 2022 11:15 pm, edited 1 time in total.
Offline

Mike Ambrose

  • Posts: 189
  • Joined: Wed Jan 13, 2016 11:31 pm

Re: Blackmagic Micro Converter 3D LUT doesn't seems to work

PostMon Apr 11, 2022 3:24 pm

What format and size are the LUTs you're pushing to the converter?
Offline

hjlee918

  • Posts: 8
  • Joined: Tue Apr 25, 2017 7:31 pm
  • Real Name: John Lee

Re: Blackmagic Micro Converter 3D LUT doesn't seems to work

PostMon Apr 11, 2022 4:46 pm

Mike Ambrose wrote:What format and size are the LUTs you're pushing to the converter?

it's 33 general cube generated from calman cube generator.
Offline
User avatar

Tommaso Alvisi

  • Posts: 150
  • Joined: Wed Aug 22, 2012 7:53 am
  • Location: ITALY

Re: Blackmagic Micro Converter 3D LUT Problem

PostWed Aug 10, 2022 1:29 pm

hjlee918 wrote:it's 33 general cube generated from calman cube generator.


Hey, did you solve the issue? How? Thanks!!!!

Return to Post Production

Who is online

Users browsing this forum: No registered users and 27 guests