- Posts: 4
- Joined: Thu Apr 24, 2014 11:35 pm
Hi,
1. Download and install Camera 7.7.3 from the support website:
To put the camera into recovery mode. To do this:
i. Disconnect all power sources and remove the battery to ensure that the camera is totally powered down.
ii. Connect power to the camera and power it up while holding down the focus button.
iii. Camera will power up with a blank screen and the fan should be running.
2. Once the camera is powered up in recovery mode, launch Blackmagic Camera Setup v7.7.3 and connect the camera to the computer via USB. This should now allow the camera to be detected by the computer. Click on the ‘Update’ button and allow the process to complete.
3. Once the update is completed, power cycle the camera. Then install Camera v7.9.
4. Now update the camera normally with Camera v7.9 and this should now be able to complete successfully.