Constellation Failing PAT Test

Questions about ATEM Switchers, Camera Converter and everything live!
  • Author
  • Message
Offline

Liam_Driver

  • Posts: 2
  • Joined: Fri Aug 12, 2022 4:36 pm
  • Real Name: Liam Driver

Constellation Failing PAT Test

PostFri Aug 12, 2022 4:56 pm

Hello,

I am currently going through my kit room and PAT testing all the mains powered electricals, I have a ATEM Constellation HD inside a flight case rack which is failing. I have taken it out of the case as well and it still fails. The constellation is failing on the amount of leakage 0.88 mAmp is this common? or a known issue?

I have tested all the other ATEMs which were all fine just getting stuck this item. It is only a month old so it shouldn't be having any issues.

Please let me know any advice or solutions that would be amazing :D thanks in advance
Offline

Richard Knight

  • Posts: 163
  • Joined: Mon Dec 17, 2012 1:39 pm

Re: Constellation Failing PAT Test

PostSat Aug 13, 2022 2:44 pm

0.88mA is not much. I've seen 5mA as a pass / no pass limit.
Offline

AndyMcHardy

  • Posts: 183
  • Joined: Sun Oct 08, 2017 11:11 am
  • Location: UK

Re: Constellation Failing PAT Test

PostSun Aug 14, 2022 4:17 pm

Can depend on the tester and how up to date it is.
The rules were updated in 2020 to allow higher limits up to 5mA, previously it was 0.75 mA for handheld and up to 3.5mA for IT devices so your 0.88 sounds fine to me.
Flypack 1: ATEM 1M/E 4K | Studio Converter | Camera Converter | Hyperdeck Studio Pro | 12x12 Cleanswitch | SmartScope Duo 4K | Teranex 2D
Flypack 2: ATEM TVS HD | Hyperdeck Studio Mini | SmartView Duo
Office: ATEM Mini
Offline

Liam_Driver

  • Posts: 2
  • Joined: Fri Aug 12, 2022 4:36 pm
  • Real Name: Liam Driver

Re: Constellation Failing PAT Test

PostMon Aug 15, 2022 8:30 am

amazing thanks both of you, just wanted to be on the safe side :)

Return to Live Production

Who is online

Users browsing this forum: No registered users and 45 guests