- Posts: 93
- Joined: Wed Jul 22, 2020 10:47 am
- Real Name: Kay Golze
- Fusion startpage
- Blackmagic-Fusion-Studio-startpage.png (13.11 KiB) Viewed 3943 times
Hi, I observed that FUSION Studio 18.1.2 starts on my machine only when I start the program on the main monitor 1.
I work with two monitors. My system has three graphics cards, one internal CPU graphics (I9 12900K, Intel Core i9 UHD Graphics 770) and two external NVIDIA P6000 24GB in SLI mode. Monitor 1 works with CPU graphics, Monitor 2 works with the main graphics card of the NVIDIA package. If I start FUSION and move my cursor to the second monitor during startup (e.g. because the mouse gets rusty), Fusion starts up to the main window, but then hangs and does not allow any more input. Fusion starts normally when the program is launched on Monitor 1 and the mouse cursor remains in Monitor 1.
The second effect is also interesting. After a successful launch of Fusion, if I move the program to the second monitor and run a render, want to do other work in the first monitor, Fusion crashes without error message.
Both errors are easily reproducible.
A third effect. Maybe it's all connected. I sometimes use the Node SphericalStabilizer to stabilize 8k videos. The graphics cards are used between 1-4% at the PreRender (Tracking process). The CPU is about 35% (The machine doesn't really do anything). In the IO, single-digit MB are read or written. The processing times with Fusion are very high and actually not justifiable in terms of costs. Am I doing something wrong or is it because of the software?
- Fusion in action
- Blackmagic-Fusion-Studio-in_action.png (91.44 KiB) Viewed 3943 times
In the graph it is interesting to see that when fusion is minimized into the taskbar, the performance core is turned off. When Fusion is displayed on the monitor in full image, apparently all cores are used. Program minimized, Fusion uses only the efficient cores, program maximized, efficient cores and performance core are used together. This effect can be verified at any time, as I have noticed.
It is particularly annoying that Fusion crashes after about 60 minutes of tracking without error message. This is annoying with a version of 18.x.
Is this normal or a mistake on my part?
8-12k VR production.
ASUS Maximus Z690 Formula, I9 12900K, DDR5 64GB/5200,
2xNVIDIA P6000 24GB, 84 TB Workspace
ASUS Maximus Z690 Formula, I9 12900K, DDR5 64GB/5200,
2xNVIDIA P6000 24GB, 84 TB Workspace