Trouble with Linux config

hey hey.

Running Rocky linux 9.4

iI tried installing
the 570.86.16 and 570.133.07 from the Nvidia website Resulting in BLAK SCREEN .
I'm running 19.1.4 with the recommende driver (NVIDIA-Linux-x86_64-550.54.14.run.)
I cant find the rekommende driver from the .NFO file from the installer (resolve sturdio 20) NVIDIA-Linux-x86_64-570.26.run.
Were do i find it ?

Regards
Renekim

Under Linux Mint Mate Xia 22.1, with an AMD Ryzen 5 2600X, 32GB of RAM, and an NVIDIA GeForce RTX 3050 (driver 570), on an Aeorus B550 Elite V2 motherboard, with Cuda 12.8 installed, I found it completely impossible to use a kernel higher than 6.8 due to DKMS issues.

After a week of trying to change the BIOS and the OS, I simply changed the kernel to Linux 6.14.2-1-liquorix-amd64 x86_64, and everything worked perfectly (except for the neural engine training, which keeps closing the program at phase 1 of 81).

So I recommend trying changing the kernel to Liquorix.
I also wanted to try Xanmod, but its page wouldn't load; they must be undergoing maintenance.
You can later disable Secure Boot and CSM in the BIOS and Resolve 20 will still work.

If you don't have am RTX 5xxx series, stay on driver 550...
i had some trouble too with 570 on rocky 9.5

550 are fine.
Ciao