- Posts: 4
- Joined: Sun Nov 01, 2020 10:37 pm
- Location: Riverside, California, USA
- Real Name: Tyler Bianco
Sun Nov 01, 2020 11:02 pm
Hello everybody!
I am running a Constellation and four URSA Broadcast cameras. Unfortunately, I am not getting talkback from the cameras back to the switcher. When I key the mic (PTT), I am hearing sidetone in the headset on the camera end. The cameras can hear the talkback from the switcher, as well as RET. But no TB from cameras to switcher
Additionally, I am running out PRD-TB and ENG-TB to external Talkback devices (over RJ45) and am getting good audio there both ways.
Troubleshooting already done:
- Verified that Talkback is enabled in ATEM Software Control on Production channel
- Verified signal chain from ATEM to Cameras and Cameras to ATEM (no image issues, and full CCU/Tally)
- Verified that Cameras are "on" in Fairlight (no camera audio is used in PGM tho)
- Verified that Cameras are set to "Switcher" for Program Audio setting
- Verified "Headset Mic Level" is set to 100 on Cameras in Talkback Settings pane
- Verified that Production channel is turned on on Switcher front panel
- Swapped multiple headsets on Camera (but still hearing its own sidetone on all just fine)
- Swapped cables between Cameras/Switcher (both Belden 1694A and 4505R)
Signal Chain:
ATEM Constellation (PGM Output) > BMD Mini Converter SDI 4k Distro > Camera
I'm sure I must be missing something simple here...any ideas?!
I am running a Constellation and four URSA Broadcast cameras. Unfortunately, I am not getting talkback from the cameras back to the switcher. When I key the mic (PTT), I am hearing sidetone in the headset on the camera end. The cameras can hear the talkback from the switcher, as well as RET. But no TB from cameras to switcher
Additionally, I am running out PRD-TB and ENG-TB to external Talkback devices (over RJ45) and am getting good audio there both ways.Troubleshooting already done:
- Verified that Talkback is enabled in ATEM Software Control on Production channel
- Verified signal chain from ATEM to Cameras and Cameras to ATEM (no image issues, and full CCU/Tally)
- Verified that Cameras are "on" in Fairlight (no camera audio is used in PGM tho)
- Verified that Cameras are set to "Switcher" for Program Audio setting
- Verified "Headset Mic Level" is set to 100 on Cameras in Talkback Settings pane
- Verified that Production channel is turned on on Switcher front panel
- Swapped multiple headsets on Camera (but still hearing its own sidetone on all just fine)
- Swapped cables between Cameras/Switcher (both Belden 1694A and 4505R)
Signal Chain:
ATEM Constellation (PGM Output) > BMD Mini Converter SDI 4k Distro > Camera
I'm sure I must be missing something simple here...any ideas?!
Tyler John Bianco :: Studio Manager :: Sandals Church | Riverside, CA, USA