PYXIS Monitor with Micro G2

He runs XLCS. He built the cages for the Micro Camera, Pocket Camera, and the Pyxis.

https://www.xlcsdesigns.com/

yeah... I know

last announcement for the Pyxis Monitor used with the Micro G2
I wish there would be another solution for connection, not just USB-C, for longer distances.

That would be very cool. I'd like to have a Micro 4k G2 on a gimble in an auditorium. To have full control from the av booth would be sweet.

Do you mean on a drone controlled by the AV booth?

He runs XLCS. He built the cages for the Micro Camera, Pocket Camera, and the Pyxis.

https://www.xlcsdesigns.com/

yeah... I know

last announcement for the Pyxis Monitor used with the Micro G2
I wish there would be another solution for connection, not just USB-C, for longer distances.

Rest API is already supported.

Rest API is already supported.

... tell me how to do all the basic settings (in the 'deeper' Meneu - not the HUD Menu/Display) for the camera using Rest API over cable - as far as I saw, the REST API don't support those settings - and there is no App or Bluetooth connection.
By now it is only possible with the buttons on the camera - viewing the menu settings over HDMI.
And if there are problems with the HDMI, you are lost.

... tell me how to do all the basic settings (in the 'deeper' Meneu - not the HUD Menu/Display) for the camera using Rest API over cable - as far as I saw, the REST API don't support those settings…

Look harder, it’s all there. There are only 1 or 2 funtions that aren’t available via the API. Further the API allows access to things like the color corrector that aren’t accessible thru the menus.

viewtopic.php?f=4&t=194977

Good Luck

Has anyone tried this to see if it works as a hub with the MSC4KG2?

https://www.bhphotovideo.com/c/product/ ... b_for.html

Kondor Blue Mobile USB-C Media Hub

Has anyone tried this to see if it works as a hub with the MSC4KG2?

https://www.bhphotovideo.com/c/product/ ... b_for.html

Kondor Blue Mobile USB-C Media Hub

This doesn’t have a USBC Monitor Out, just an HDMI—so it defeats the purpose if you are trying to get it to work with the Pyxis Monitor.


Sent from my iPhone using Tapatalk

Has anyone tried this to see if it works as a hub with the MSC4KG2?

https://www.bhphotovideo.com/c/product/ ... b_for.html

Kondor Blue Mobile USB-C Media Hub

This doesn’t have a USBC Monitor Out, just an HDMI—so it defeats the purpose if you are trying to get it to work with the Pyxis Monitor.


Sent from my iPhone using Tapatalk

Will, are you making a cage for the Pyxis Monitor?

I found another potential HUB for the Pyxis Monitor on the G2 and started rigging it too ^^ Really hoping update 9.7 gets released soon!

I found another potential HUB for the Pyxis Monitor on the G2 and started rigging it too ^^ Really hoping update 9.7 gets released soon!

Almost. It needs a USB-C port with Display Port Alt mode support.

Almost. It needs a USB-C port with Display Port Alt mode support.

Time will tell, there’s no reason the interface couldn’t support UVC or some other low latency standard. Honestly alt-dp is a little thick datawise and doesn’t leave a ton of bandwith for recording, camera control, etc.,

Good Luck

Almost. It needs a USB-C port with Display Port Alt mode support.

Time will tell, there’s no reason the interface couldn’t support UVC or some other low latency standard. Honestly alt-dp is a little thick datawise and doesn’t leave a ton of bandwith for recording, camera control, etc.,

Good Luck

It needs Display Alt DP since that is what the Pyxis Monitor uses. You can't use a Touchscreen with HDMI as it provides no control.

I wonder if they could add playback functionality via the pyxis monitor? This would be a great addition if they can sort out running both the monitor and capturing to ssd!

I wonder if they could add playback functionality via the pyxis monitor? This would be a great addition if they can sort out running both the monitor and capturing to ssd!

They probably could. It seems like on the new firmware either they added all the touchscreen features to the existing firmware or completely ported over the touchscreen firmware over.

I think this one is a winner when it comes to ports.

It supports video out via USB-C and the has a USB-C out port for data.

61q0BENj+nL._AC_SL1500_.jpg (62.64 KiB) Viewed 4356 times

61PQM8vfgGL._AC_SL1500_.jpg (100.05 KiB) Viewed 4356 times

https://www.amazon.com/USB-Charging-Mul ... B0DMJFX528

USB C to AR Glasses with Charging Adapter Enables Multi-Screen Enhanced 3D VR Video Features Compatible for iPhone 15/16 Viture/Rokid/Xreal AR Glasses (Dual USB C)

About this item
【Transmission & Charging 2 in 1】AGFINEST 2-in-1 charging converter(USB C+USB C), designed for connecting AR glasses or wearable devices, allows you to enjoy a new viewing experience and immerse yourself in the fun of AR videos. Specially equipped AR charging module to solve the charging problem after connecting AR glasses. Equipped with high-quality transmission signals and protocols to ensure stable data transmission, strong image detail recovery and no loss of sound quality.
【High-quality material】Thanks to the tin-plated interface and triple shielding technology, signal transmission is stable, keep audio/video synchronization. The 24-carat gold-plated interface is corrosion-resistant and offers first-class image and sound effects. The aluminium alloy shell is durable and provides excellent heat dissipation.
【Portable and Lightweight】Smart AR Glasses Adapter is no need for tedious setup or any programme, easy to connect. compact size, easy to carry, suitable for traveling use.
【High compatibility】 Compatible with a wide range of smart glasses: Xreal/Nreal, Rokid Air/Max, RayNeo XR, Viture One, Thunderbird AR and more. Compatible with Switch, Xbox, PS4/5, Steam Deck, ROG Ally and more. Compatible with various USB-C portable displays, USB-C projectors, Google TV, Fire TV Stick and more. Compatible with laptop, mobile phone, camera, monitor, MacBook, iMac, iPad, IOS, Android, Windows, Dell, Asus, Huawei, HP, Lenovo and more.
【Notice】1. Please update the firmware version of the AR glasses to the latest version; 2. If the adapter does not work properly, please reconnect the (USB-C OUT) port of the adapter; 3. Please make sure that the connected device supports audio and video transmission.

How about this one?
Has a USB-C displayport

https://a.co/d/gT6NJzU

Has anyone tried this to see if it works as a hub with the MSC4KG2?

https://www.bhphotovideo.com/c/product/ ... b_for.html

Kondor Blue Mobile USB-C Media Hub

This doesn’t have a USBC Monitor Out, just an HDMI—so it defeats the purpose if you are trying to get it to work with the Pyxis Monitor.


Sent from my iPhone using Tapatalk

So apparently the older model had the video pass though the USB-c.
Think that might work?

Here’s the original model:

How about this one?
Has a USB-C displayport

https://a.co/d/gT6NJzU

This one should work.

when they going to release the update so the monitor works with the Micro???

when they going to release the update so the monitor works with the Micro???

That's what I am wondering.

Hello, do we have a release date for the 9.7 firmware for the Micro G2?

I'm really eager to test as soon as possible whether we can have both the pyxis monitor and an ssd working with the Micro G2 at the same time.

Hello, do we have a release date for the 9.7 firmware for the Micro G2?

I'm really eager to test as soon as possible whether we can have both the pyxis monitor and an ssd working with the Micro G2 at the same time.

Did you see that hub I posted above?

Hello, do we have a release date for the 9.7 firmware for the Micro G2?

I'm really eager to test as soon as possible whether we can have both the pyxis monitor and an ssd working with the Micro G2 at the same time.

Did you see that hub I posted above?

Thank you, it's a candidate for testing.
I see this hub has a PD input as well, and this makes me think:

1) Will the Micro G2 be able to power both the SSD and monitor without needing external power from the PD input?
2) As far as I know, the Micro G2 can't be powered via USB-C, so if you feed power to the PD input of the USB hub, will there be any risk of damaging the Micro G2?
3) I don't see any specs regarding the speed of the USB-C data port on the hub.

Hello, do we have a release date for the 9.7 firmware for the Micro G2?

I'm really eager to test as soon as possible whether we can have both the pyxis monitor and an ssd working with the Micro G2 at the same time.

Did you see that hub I posted above?

Thank you, it's a candidate for testing.
I see this hub has a PD input as well, and this makes me think:

1) Will the Micro G2 be able to power both the SSD and monitor without needing external power from the PD input?
2) As far as I know, the Micro G2 can't be powered via USB-C, so if you feed power to the PD input of the USB hub, will there be any risk of damaging the Micro G2?
3) I don't see any specs regarding the speed of the USB-C data port on the hub.

I’ve been reading some articles on USB-C displayport, and there appears to be consensus that these types of ports support power delivery by default. Not sure about standardized voltages though. Not a clear cut answer, but it’s something(if I understood correctly). I’m not sure how to post urls, so try google searching usb c displayport alt mode.

I've been following the discussion here for a bit and am wondering if it wouldn't be better to implement the Video Assist 5 or 7" with the new firmware. This would solve the problem with the recording medium (SSD or memory card). Of course, it would be nice if the Pyxis monitor also worked, but not at the expense of performance with the storage medium or even limitations in recording quality.

Hello,
I've exchanged a couple of emails with the Support Team regarding the upcoming firmware, and they say that using a USB hub to connect both an SSD and the Pyxis Monitor to the Micro G2 is NOT supported.

It's not clear if it's a hardware or firmware limitation.



(Post updated to clarify that I was talking about the upcoming firmware )

Hello,
I've exchanged a couple of emails with the Support Team, and they say that using a USB hub to connect both an SSD and the Pyxis Monitor to the Micro G2 is currently NOT supported.

It's not clear if it's a hardware or firmware limitation.

Does the monitor work yet with the Micro G2?

Hello,
I've exchanged a couple of emails with the Support Team, and they say that using a USB hub to connect both an SSD and the Pyxis Monitor to the Micro G2 is currently NOT supported.

It's not clear if it's a hardware or firmware limitation.

The new firmware isn't out yet.

Apologies, as I wasn't clear enough in my previous post: the conversation with the Support Team was about the upcoming firmware that enables the Micro G2 to work with the Pyxis Monitor;


I updated the post.

Apologies, as I wasn't clear enough in my previous post: the conversation with the Support Team was about the upcoming firmware that enables the Micro G2 to work with the Pyxis Monitor;


I updated the post.

I'm not sure if they truly know. Pyxis monitor without SSD is mostly useless.

9.6 firmware released today, along with this video on BMD's YouTube channel

We've recently paired the Blackmagic Micro Studio Camera G2 with a PYXIS Monitor. The camera is running the latest Blackmagic Camera 9.6 firmware.

When connecting the monitor via USB-C, we’ve tried both a standard USB-C cable and the specific cable that comes with the Blackmagic remote control (the one with the screw-locking wheel for securing the connection) , the PYXIS screen remains black. The backlight turns on, but no image appears.

We're wondering:

- Has anyone else experienced this issue?
- Is the included cable possibly not suitable for video output?
- Is a specific type of USB-C cable required for this setup?

Any insights or shared experiences would be greatly appreciated!

Assume I am going to buy this from B&H and have no cage, etc., on my G2, what parts do I need?

We've recently paired the Blackmagic Micro Studio Camera G2 with a PYXIS Monitor. The camera is running the latest Blackmagic Camera 9.6 firmware.

When connecting the monitor via USB-C, we’ve tried both a standard USB-C cable and the specific cable that comes with the Blackmagic remote control (the one with the screw-locking wheel for securing the connection) , the PYXIS screen remains black. The backlight turns on, but no image appears.

We're wondering:

- Has anyone else experienced this issue?
- Is the included cable possibly not suitable for video output?
- Is a specific type of USB-C cable required for this setup?

Any insights or shared experiences would be greatly appreciated!

Yes I had this issue as well. Could not use the Blackmagic cable, but a thunderbolt cable works.

However, this update is really gamechanging in terms of usability. A little sad that the Status Text cannot be toggled on the SDI like all other blackmagic cameras. Had hoped this would be on pair with the other cameras as this is extremely practical. Maybe there has been a technical limitation.

Assume I am going to buy this from B&H and have no cage, etc., on my G2, what parts do I need?

The new cage from XLCS Designs was built to allow you to mount BMDs monitor mount directly to the cage. Check it out at xlcsdesigns.com. They will begin shipping tomorrow.


Sent from my iPhone using Tapatalk

We've recently paired the Blackmagic Micro Studio Camera G2 with a PYXIS Monitor. The camera is running the latest Blackmagic Camera 9.6 firmware.

When connecting the monitor via USB-C, we’ve tried both a standard USB-C cable and the specific cable that comes with the Blackmagic remote control (the one with the screw-locking wheel for securing the connection) , the PYXIS screen remains black. The backlight turns on, but no image appears.

We're wondering:

- Has anyone else experienced this issue?
- Is the included cable possibly not suitable for video output?
- Is a specific type of USB-C cable required for this setup?

Any insights or shared experiences would be greatly appreciated!

You need cables specific for USB video delivery. Or a Thunderbolt cable as they have smaller tolerances.

Assume I am going to buy this from B&H and have no cage, etc., on my G2, what parts do I need?

The new cage from XLCS Designs was built to allow you to mount BMDs monitor mount directly to the cage. Check it out at xlcsdesigns.com. They will begin shipping tomorrow.


Sent from my iPhone using Tapatalk

Are you going to release an adapter for the existing cage? Also are you going to do a video on the new firmware?

Anyone know if the Gyro bug is fixed in this firmware?

Happy to confirm you can simultaneously use the monitor AND record to SSD via a hub that supports display output.


Sent from my iPhone using Tapatalk

Happy to confirm you can simultaneously use the monitor AND record to SSD via a hub that supports display output.


Sent from my iPhone using Tapatalk

Which hub did you go with?

Happy to confirm you can simultaneously use the monitor AND record to SSD via a hub that supports display output.


Sent from my iPhone using Tapatalk

Yeah, what hub you using? I found Selore website, but none look as slim as what you have pictured...

Happy to confirm you can simultaneously use the monitor AND record to SSD via a hub that supports display output.


Sent from my iPhone using Tapatalk

I knew you’d find one! This is gonna make a sick little cam for a DJI gimbal.

Pyxis monitors are on sale right now in Germany - Teltec, Videodata, Mediatec.
Maybe they know something we don't know.

well, I'll probably wait for the 7" version everybody dreams of...

Until Will responds to question of which hub.

I found this on Amazon that seems to look like the photo.

I have no idea if this is the hub.

https://www.amazon.com/Adapter-Aluminum ... =8-10&th=1

Until Will responds to question of which hub.

I found this on Amazon that seems to look like the photo.

I have no idea if this is the hub.

https://www.amazon.com/Adapter-Aluminum ... =8-10&th=1

That looks like it will work.

https://www.amazon.com/dp/B0BQ75D5VP?re ... title&th=1

This is the one I have been testing with. I am also developing a more compact option for mounting to cages etc.


Sent from my iPhone using Tapatalk

https://www.amazon.com/dp/B0BQ75D5VP?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1

This is the one I have been testing with. I am also developing a more compact option for mounting to cages etc.


Sent from my iPhone using Tapatalk

Is it greedy if I want ethernet too?