BMPC 29.97 SDI -> 59.94 interlaced?

I have a monitor that does not accept 29.97hz signals over HDMI. Is there a way for the BMPC to output an interlaced signal? If not, is there a cheap SDI->HDMI converter that will do this? I have seen specs that the Atomos Connect can, but it is not listed in their manual so I'm skeptical.

P.S. I'm referring to 1920x1080 output

[Gary Adams]

Hello Scott. You must be referring to the Pocket Camera. The HDMI output is only progressive on this camera.

Regards, Gary

Hello Scott. You must be referring to the Pocket Camera. The HDMI output is only progressive on this camera.

Regards, Gary

No I am using the 4K camera. I meant to say SDI in my original post.

[Gary Adams]

Hi Scott. Thanks for the clarification. The 4K camera does not have an interlaced output either. Only the Cinema Camera will do the interlaced (like Psf) output when overlays are turned off and when the frame rate is 59.94 or 50. The Television Studio camera also outputs a true interlaced signal. So to clarify, the Production Camera 4K and the Pocket Cinema Camera only output Progressive formats.

Regards, Gary

... The 4K camera does not have an interlaced output either. ... So to clarify, the Production Camera 4K and the Pocket Cinema Camera only output Progressive formats. ...

Hi Gary: If what you say is correct, please tell your tech writers to update page 11 in the Camera user manual ("Blackmagic Cameras Supported Video Formats"). The (mis)information there has confused people for many months. Cheers.

-

[Gary Adams]

You are correct as usual Peter. It is confusing. We will try to correct it.

Regards, Gary

Or even better support 1080i output from the 4K camera!

Ahhhh nice to finally get an answer I been looking for since I tried to use the BMD Ultra recorder and got ZERO image from the BMPC4k on interlaced settings