Resolve 15.1 ~ Issue

Just A heads-up!

Just installed the new 15.1 and when launched, it stops at the "LOOKING FOR CONTROL PANEL" text and won't go past it to finish launching. Reverted back to 15.0.1 and all is well again. Never had it hang like this on any other version. Oy . . .

System:
Win 10

[Peter Chamberlain]

Rob, we need a little more info to repo your report.. what is the system config etc?

Same issue reported earlier today: viewtopic.php?f=21&t=79217

[Peter Chamberlain]

We can now see this.. If you have a multi-GPU Windows system, you need to set your GPU Processing Mode to Auto before upgrading to DaVinci Resolve 15.1.

This will be addressed in the next dot update.

Rob, we need a little more info to repo your report.. what is the system config etc?

Sorry . . .

Here's my system specs:

MSI X79A-GD65 (8D) LGA 2011 Intel X79 ATX Intel Motherboard

Intel Core i7-3930K Sandy Bridge-E 3.2GHz (3.8GHz Turbo) LGA 2011 6 Core/12 Thread Desktop Processor

G.SKILL Ripjaws Z Series 64GB (8 x 8GB) 240-Pin DDR3 SDRAM Kit

XFX ProSeries P1-1250-BEFX 1250W PSU

Current video cards – Nvidia GTX 1070 x2 each running in full x16, PCIe 3.0

Drives:
SSD – OS & Programs – 250gb
SSD - Cache – 2 x 120GB in raid 0 (total 240GB)
SSD – Media Drive – (for reading from only) External 8 Disk Hardware Raid 0, currently 4TB, expandable to 8TB . . . average read/write of 2.5GB per second

Hard Disks:
2 x 1TB idle storage
Render Drive: External USB 3 . . . (it’s an on-the-fly unit which means I can simply/literally drop any hard drive up to 6TB into the slot, SSD or hard disk)

We can now see this.. If you have a multi-GPU Windows system, you need to set your GPU Processing Mode to Auto before upgrading to DaVinci Resolve 15.1.

This will be addressed in the next dot update.

Yes.
I've always had it set to this and it was when I did the install this morning.

Thanks!

So......

Downloaded and installed the supposed "fix" and it's still doing the same thing, hanging on "looking for panel".

WTF???

Nothing has changed in my system at least since ver 12xx and Resolve has never done this before. The ONLY new thing of course has been the latest Win 10 updtaes but nothing else has been affected.

The only thing I noticed is this: after I install/uninstall anything, I always run CClenaer to clean the registry of invalid entries. What I saw was the list of entries that for Windows firewall which I gennerally see after an uninstall. So now this is the 2nd time I've had roll back to 15.0.1, and Windows firewall has not prompted me to "OK" Resolve to pass through.

Please fix this!!!

[Dwaine Maggart]

In Windows Control Panels, Programs and Features, what are the last 4 digits of the DaVinci Resolve version number? If it's 0023 or 0024, download 15.1 again and reinstall. It needs to be build 25 which will be 0025.

In Windows Control Panels, Programs and Features, what are the last 4 digits of the DaVinci Resolve version number? If it's 0023 or 0024, download 15.1 again and reinstall. It needs to be build 25 which will be 0025.

It's 0024, but I just downloaded it like 2 hours ago!

[Dwaine Maggart]

Right. The newer version went up after that. Please download and install again.

Right. The newer version went up after that. Please download and install again.

Ok. Just downloaded and this one says 0025.

I'll try it gain in alittle while and post back.


I love you guys but . . .

If it doesn't work THIS time, I'm gonna have have Luca Brazzi come have a talk with you!!!

Yay!!!

It works.

Thanks much Dwaine!!!

For the rest of you Windows guys, to check the full version number, download the installer, unzip it and then right-click on the executable, select "Properties", click the 'Details" tab and you'll se the complete full version number.

Happy Grading . . .